2027 Opel Corsa Hatchback E Engine Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
All Opel gasoline straight-3 1.0 L B 10 XFL engines | 7.38 lbf⋅ft |
All Opel gasoline straight-3 1.0 L B 10 XFT engines | 7.38 lbf⋅ft |
All Opel diesel straight-4 1.2 L B 13 DTC engines | 18.44 lbf⋅ft |
See figure 1. | |
All Opel diesel straight-4 1.2 L B 13 DTE engines | 18.44 lbf⋅ft |
See figure 1. | |
All Opel diesel straight-4 1.2 L B 13 DTR engines | 18.44 lbf⋅ft |
See figure 1. | |
All other modifications | 14.75 lbf⋅ft |
All Opel gasoline straight-3 1.0 L B 10 XFL engines | 42.78 lbf⋅ft |
All Opel gasoline straight-3 1.0 L B 10 XFT engines | 42.78 lbf⋅ft |
All Opel diesel straight-4 1.2 L B 13 DTC engines | 36.88 lbf⋅ft |
All Opel diesel straight-4 1.2 L B 13 DTE engines | 36.88 lbf⋅ft |
All Opel diesel straight-4 1.2 L B 13 DTR engines | 36.88 lbf⋅ft |
All Opel gasoline straight-4 1.6 L B 16 LES engines | 40.57 lbf⋅ft |
Lower mounting | 16.23 lbf⋅ft |
Upper fastening | 40.57 lbf⋅ft |
Air-conditioning compressor | 16.23 lbf⋅ft |
Air-conditioning compressor bracket | 16.23 lbf⋅ft |
Air-conditioning compressor pressure line | 14.75 lbf⋅ft |
All Opel gasoline straight-3 1.0 L B 10 XFL engines | 16.23 lbf⋅ft |
All Opel diesel straight-4 1.2 L B 13 DTC engines | 16.23 lbf⋅ft |
All Opel diesel straight-4 1.2 L B 13 DTE engines | 16.23 lbf⋅ft |
All Opel diesel straight-4 1.2 L B 13 DTR engines | 16.23 lbf⋅ft |
All other modifications | 25.81 lbf⋅ft |
Alternator pulley | 59 lbf⋅ft |
Generator bracket | 16.23 lbf⋅ft |
All Opel gasoline straight-3 1.0 L B 10 XFL engines | 18.44 lbf⋅ft |
All Opel gasoline straight-3 1.0 L B 10 XFT engines | 18.44 lbf⋅ft |
All other modifications | 14.75 lbf⋅ft |
High-pressure side | 7.38 lbf⋅ft |
Low-pressure side | 6.64 lbf⋅ft |
Low-pressure side | 6.64 lbf⋅ft |
M6 | 6.64 lbf⋅ft |
M8 | 18.44 lbf⋅ft |
1.0 with gasoline straight-3 1.0 L 114 HP engine (2014.9–) | 7.38 lbf⋅ft |
See figure 2. | |
1.0 with gasoline straight-3 1.0 L 89 HP engine (2014.9–) | 7.38 lbf⋅ft |
See figure 2. | |
1.2 with gasoline straight-4 1.2 L 68 HP at 5600 RPM engine (2014.9–) | 5.16 lbf⋅ft |
1.4 LPG with gasoline straight-4 1.4 L 89 HP at 6000 RPM, 130 N⋅m at 4000 RPM engine (2015.3–) | 4.43 lbf⋅ft |
1.4 Turbo with gasoline straight-4 1.4 L 148 HP, 200 N⋅m at 1850 RPM engine (2015.3–) | 5.9 lbf⋅ft |
1.4 Turbo with gasoline straight-4 1.4 L 99 HP at 3500 RPM, 200 N⋅m at 1850 RPM engine (2014.9–) | 5.9 lbf⋅ft |
1.4 with gasoline straight-4 1.4 L 74 HP, 130 N⋅m at 4000 RPM engine (2014.9–) | 5.16 lbf⋅ft |
1.4 with gasoline straight-4 1.4 L 89 HP at 6000 RPM, 130 N⋅m at 4000 RPM engine (2014.9–) | 4.43 lbf⋅ft |
1.6 Turbo with gasoline straight-4 1.6 L 204 HP engine (2015.3–) | 5.9 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
All Opel gasoline straight-3 1.0 L B 10 XFL engines | 22.13 lbf⋅ft |
Replace high-pressure line. | |
All Opel gasoline straight-3 1.0 L B 10 XFT engines | 22.13 lbf⋅ft |
Replace high-pressure line. |
On high-pressure pump | 17.7 lbf⋅ft |
On rail | 20.65 lbf⋅ft |
All Opel gasoline straight-3 1.0 L B 10 XFL engines | 18.44 lbf⋅ft |
Screws need to be loosened or tightened in steps of 180°. | |
All Opel gasoline straight-3 1.0 L B 10 XFT engines | 18.44 lbf⋅ft |
Screws need to be loosened or tightened in steps of 180°. | |
All other modifications | 11.06 lbf⋅ft |
On injector | 17.7 lbf⋅ft |
On rail | 20.65 lbf⋅ft |
All Opel gasoline straight-3 1.0 L B 10 XFL engines | 3.69 lbf⋅ft |
Replace screws. | |
All Opel gasoline straight-3 1.0 L B 10 XFT engines | 3.69 lbf⋅ft |
Replace screws. | |
All other modifications | 14.75 lbf⋅ft |
All Opel gasoline straight-4 1.4 L B 14 NEH engines | 2.58 lbf⋅ft |
All Opel gasoline straight-4 1.6 L B 16 LES engines | 5.9 lbf⋅ft |
All other modifications | 6.64 lbf⋅ft |
First stage | 7.38 lbf⋅ft |
Replace nuts. | |
Second stage | 13.28 lbf⋅ft |
All Opel gasoline straight-4 1.4 L B 14 NEH engines | 5.9 lbf⋅ft |
Replace nuts. See figure 3. | |
All Opel gasoline straight-4 1.4 L B 14 NEJ engines | 5.9 lbf⋅ft |
Replace nuts. See figure 3. | |
All Opel gasoline straight-4 1.6 L B 16 LES engines | 5.9 lbf⋅ft |
Replace nuts. See figure 3. | |
All other modifications | 18.44 lbf⋅ft |
Replace nuts. |
Banjo screws | 22.13 lbf⋅ft |
Banjo screws | 22.13 lbf⋅ft |
All other modifications | 25.81 lbf⋅ft |
All Opel gasoline straight-3 1.0 L B 10 XFL engines | 25.81 lbf⋅ft |
All Opel gasoline straight-3 1.0 L B 10 XFT engines | 25.81 lbf⋅ft |
All Opel gasoline straight-4 1.4 L B 14 NEH engines | 5.9 lbf⋅ft |
All Opel gasoline straight-4 1.4 L B 14 NEJ engines | 5.9 lbf⋅ft |
All Opel gasoline straight-3 1.0 L B 10 XFL engines | 18.44 lbf⋅ft |
All Opel gasoline straight-3 1.0 L B 10 XFT engines | 18.44 lbf⋅ft |
Banjo screws | 14.75 lbf⋅ft |
Screws | 5.9 lbf⋅ft |
Banjo screws | 14.75 lbf⋅ft |
Screws | 5.9 lbf⋅ft |
Banjo screws | 22.13 lbf⋅ft |
Banjo screws | 16.23 lbf⋅ft |
Replace sealing rings. |
All Opel gasoline straight-3 1.0 L B 10 XFL engines | 7.38 lbf⋅ft |
All Opel gasoline straight-3 1.0 L B 10 XFT engines | 7.38 lbf⋅ft |
All other modifications | 5.9 lbf⋅ft |
All Opel diesel straight-4 1.2 L B 13 DTC engines | 7.08–13.28 lbf⋅in |
All Opel diesel straight-4 1.2 L B 13 DTE engines | 7.08–13.28 lbf⋅in |
All Opel diesel straight-4 1.2 L B 13 DTR engines | 7.08–13.28 lbf⋅in |
On coolant pump | 11.06 lbf⋅ft |
All Opel gasoline straight-3 1.0 L B 10 XFL engines | 18.44 lbf⋅ft |
All Opel gasoline straight-3 1.0 L B 10 XFT engines | 18.44 lbf⋅ft |
All Opel diesel straight-4 1.2 L B 13 DTC engines | 6.64 lbf⋅ft |
All Opel diesel straight-4 1.2 L B 13 DTE engines | 6.64 lbf⋅ft |
All Opel diesel straight-4 1.2 L B 13 DTR engines | 6.64 lbf⋅ft |
All Opel gasoline straight-4 1.6 L B 16 LES engines | 5.9 lbf⋅ft |
All Opel gasoline straight-4 1.6 L B 16 LES engines | 14.75 lbf⋅ft |
All other modifications | 16.23 lbf⋅ft |
All Opel diesel straight-4 1.2 L B 13 DTC engines | 5.16 lbf⋅ft |
All Opel diesel straight-4 1.2 L B 13 DTE engines | 5.16 lbf⋅ft |
All Opel diesel straight-4 1.2 L B 13 DTR engines | 5.16 lbf⋅ft |
All Opel gasoline straight-4 1.4 L B 14 NEH engines | 5.53 lbf⋅ft |
Bottom | 16.23 lbf⋅ft |
All Opel gasoline straight-4 1.6 L B 16 LES engines | 36.88 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Note correct order of tensioning. See figure 6. | |
Second stage | 180° detach. |
Third stage | 8.85 lbf⋅ft |
All other modifications | 5.9 lbf⋅ft |
from inside to outside |
First stage | 18.44 lbf⋅ft |
Replace screws. See figure 7. | |
Second stage | 22.13 lbf⋅ft |
Third stage | 240° |
First stage | 29.5 lbf⋅ft |
Replace screws. See figure 8. | |
Second stage | 90° |
Third stage | 90° |
First stage | 18.44 lbf⋅ft |
Use new screws. See figure 9. | |
Second stage | 90° |
Third stage | 90° |
Fourth stage | 90° |
Fifth stage | 45° |
First stage | 25.81 lbf⋅ft |
Replace screws. See figure 10. | |
Second stage | 180° |
First stage | 7.38 lbf⋅ft |
See figure 11. | |
Second stage | 11.06 lbf⋅ft |
First stage | Screw in screw(s) by hand. |
Note correct order of tensioning. See figure 12. |
Second stage | 8.85 lbf⋅ft |
Fourth stage | 13.28 lbf⋅ft |
Third stage | 11.06 lbf⋅ft |
Fifth stage | 18.44 lbf⋅ft |
All other modifications | 5.9 lbf⋅ft |
First stage | 18.44 lbf⋅ft |
Replace screws. | |
Second stage | 75° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 40° |
First stage | 25.81 lbf⋅ft |
Use new screws. | |
Second stage | 45° |
Third stage | 15° |
First stage | 18.44 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
Crankcase ventilation | 6.64 lbf⋅ft |
First stage | 73.76 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 36.88 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | 70.07 lbf⋅ft |
Use new screw. | |
Second stage | 45° |
Third stage | 15° |
First stage | 110.63 lbf⋅ft |
Use new screw. | |
Second stage | 45–60° |
Crankshaft pulley | 18.44 lbf⋅ft |
Engine block closure screws | 11.06 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 22.13 lbf⋅ft |
Third stage | 70° |
First stage | 11.06 lbf⋅ft |
Replace screws. | |
Second stage | 35° |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
Third stage | 15° |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
Third stage | 15° |
First stage | 25.81 lbf⋅ft |
Replace screws. | |
Second stage | 30° |
Third stage | 15° |
First stage | 11.06 lbf⋅ft |
Replace screws. See figure 13. | |
Second stage | 180° |
Third stage | 3.69 lbf⋅ft |
Fourth stage | 7.38 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Use new screws. | |
Second stage | 45° |
Third stage | 15° |
Fourth stage | 7.38 lbf⋅ft |
Replace screws. | |
Fifth stage | 60° |
Sixth stage | 15° |
First stage | 18.44 lbf⋅ft |
Tighten new bolts helically in outside to inside order. | |
Second stage | 60° |
Third stage | 15° |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
Third stage | 15° |
First stage | 14.75 lbf⋅ft |
Use new screw. | |
Second stage | 120° |
Third stage | 15° |
All Opel gasoline straight-3 1.0 L B 10 XFL engines | 7.38 lbf⋅ft |
All Opel gasoline straight-3 1.0 L B 10 XFT engines | 7.38 lbf⋅ft |
All Opel diesel straight-4 1.2 L B 13 DTC engines | 6.64 lbf⋅ft |
All Opel diesel straight-4 1.2 L B 13 DTE engines | 6.64 lbf⋅ft |
All Opel diesel straight-4 1.2 L B 13 DTR engines | 6.64 lbf⋅ft |
All other modifications | 5.9 lbf⋅ft |
All Opel gasoline straight-3 1.0 L B 10 XFL engines | 7.38 lbf⋅ft |
All Opel gasoline straight-3 1.0 L B 10 XFT engines | 7.38 lbf⋅ft |
All other modifications | 5.9 lbf⋅ft |
All Opel gasoline straight-3 1.0 L B 10 XFL engines | 18.44 lbf⋅ft |
All Opel gasoline straight-3 1.0 L B 10 XFT engines | 18.44 lbf⋅ft |
All Opel diesel straight-4 1.2 L B 13 DTC engines | 6.64 lbf⋅ft |
All Opel diesel straight-4 1.2 L B 13 DTE engines | 6.64 lbf⋅ft |
All Opel diesel straight-4 1.2 L B 13 DTR engines | 6.64 lbf⋅ft |
All other modifications | 5.9 lbf⋅ft |
All Opel gasoline straight-3 1.0 L B 10 XFL engines | 18.44 lbf⋅ft |
All Opel gasoline straight-3 1.0 L B 10 XFT engines | 18.44 lbf⋅ft |
All Opel diesel straight-4 1.2 L B 13 DTC engines | 18.44 lbf⋅ft |
All Opel diesel straight-4 1.2 L B 13 DTE engines | 18.44 lbf⋅ft |
All Opel diesel straight-4 1.2 L B 13 DTR engines | 18.44 lbf⋅ft |
All other modifications | 14.75 lbf⋅ft |
Camshaft timing gear | 110.63 lbf⋅ft |
Control unit for intake valve timing | 5.9 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 120° |
Third stage | 15° |
First stage | 14.75 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
All Opel diesel straight-4 1.2 L B 13 DTC engines | 110.63 lbf⋅ft |
All Opel diesel straight-4 1.2 L B 13 DTE engines | 110.63 lbf⋅ft |
All Opel diesel straight-4 1.2 L B 13 DTR engines | 110.63 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Use new screw. | |
Second stage | 60° |
Third stage | 15° |
First stage | 36.88 lbf⋅ft |
Second stage | 60° |
Oil pump camshaft timing chain guide rail | 7.38 lbf⋅ft |
Oil pump drive chain tensioner | 7.38 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
All Opel diesel straight-4 1.2 L B 13 DTC engines | 110.63 lbf⋅ft |
All Opel diesel straight-4 1.2 L B 13 DTE engines | 110.63 lbf⋅ft |
All Opel diesel straight-4 1.2 L B 13 DTR engines | 110.63 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Use new screw. | |
Second stage | 60° |
Third stage | 15° |
First stage | 36.88 lbf⋅ft |
Second stage | 60° |
First stage | 2.95 lbf⋅ft |
Note correct order of tensioning. See figure 17. | |
Second stage | 6.64 lbf⋅ft |
M10 screws | 25.81 lbf⋅ft |
M6 screws | 5.9 lbf⋅ft |
1.6 Turbo with gasoline straight-4 1.6 L 204 HP engine (2015.3–) | 4.43 lbf⋅ft |
1.6 Turbo with gasoline straight-4 1.6 L 204 HP engine (2015.3–) | 4.43 lbf⋅ft |
Top part of control unit housing | 6.64 lbf⋅ft |
Replace screws. |
All Opel gasoline straight-4 1.4 L B 14 NEH engines | 14.75 lbf⋅ft |
All Opel gasoline straight-4 1.6 L B 16 LES engines | 5.9 lbf⋅ft |
All other modifications | 7.38 lbf⋅ft |
1.6 Turbo with gasoline straight-4 1.6 L 204 HP engine (2015.3–) | 5.9 lbf⋅ft |
All Opel gasoline straight-3 1.0 L B 10 XFL engines | 18.44 lbf⋅ft |
Replace sealing rings. | |
All Opel gasoline straight-3 1.0 L B 10 XFT engines | 18.44 lbf⋅ft |
Replace sealing rings. | |
All Opel diesel straight-4 1.2 L B 13 DTC engines | 14.75 lbf⋅ft |
All Opel diesel straight-4 1.2 L B 13 DTE engines | 14.75 lbf⋅ft |
All Opel diesel straight-4 1.2 L B 13 DTR engines | 14.75 lbf⋅ft |
All other modifications | 10.33 lbf⋅ft |
Replace sealing rings. |
Oil filter cover | 18.44 lbf⋅ft |
Slightly oil sealing lips. |
On the engine block | 6.64 lbf⋅ft |
Oil filter cover | 18.44 lbf⋅ft |
Replace sealing rings. | |
On the engine block | 14.75 lbf⋅ft |
Replace sealing rings. |
On the engine block | 14.75 lbf⋅ft |
Replace sealing rings. |
All Opel diesel straight-4 1.2 L B 13 DTC engines | 7.38 lbf⋅ft |
All Opel diesel straight-4 1.2 L B 13 DTE engines | 7.38 lbf⋅ft |
All Opel diesel straight-4 1.2 L B 13 DTR engines | 7.38 lbf⋅ft |
All Opel gasoline straight-4 1.6 L B 16 LES engines | 11.06 lbf⋅ft |
All other modifications | 14.75 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Second stage | 7.38 lbf⋅ft |
Third stage | 18.44 lbf⋅ft |
First stage | 2.95 lbf⋅ft |
Note correct order of tensioning. See figure 17. | |
Second stage | 6.64 lbf⋅ft |
Oil pump cover | 7.38 lbf⋅ft |
M10 | 7.38 lbf⋅ft |
Oil pump cover | 5.9 lbf⋅ft |
All Opel gasoline straight-4 1.6 L B 16 LES engines | 14.75 lbf⋅ft |
All other modifications | 5.9 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Use new screw. | |
Second stage | 150° |
All other modifications | 7.38 lbf⋅ft |
All Opel gasoline straight-3 1.0 L B 10 XFL engines | 7.38 lbf⋅ft |
All Opel gasoline straight-3 1.0 L B 10 XFT engines | 7.38 lbf⋅ft |
All Opel diesel straight-4 1.2 L B 13 DTC engines | 7.38 lbf⋅ft |
All Opel diesel straight-4 1.2 L B 13 DTE engines | 7.38 lbf⋅ft |
All Opel diesel straight-4 1.2 L B 13 DTR engines | 7.38 lbf⋅ft |
All other modifications | 5.9 lbf⋅ft |
Charge air pressure sensor | 2.95 lbf⋅ft |
All Opel gasoline straight-3 1.0 L B 10 XFL engines | 7.38 lbf⋅ft |
All Opel gasoline straight-3 1.0 L B 10 XFT engines | 7.38 lbf⋅ft |
All Opel diesel straight-4 1.2 L B 13 DTC engines | 6.64 lbf⋅ft |
All Opel diesel straight-4 1.2 L B 13 DTE engines | 6.64 lbf⋅ft |
All Opel diesel straight-4 1.2 L B 13 DTR engines | 6.64 lbf⋅ft |
All Opel gasoline straight-4 1.6 L B 16 LES engines | 3.32 lbf⋅ft |
All other modifications | 5.9 lbf⋅ft |
Exhaust gas temperature sensor | 33.19 lbf⋅ft |
Glow plugs | 7.38 lbf⋅ft |
All Opel gasoline straight-4 1.6 L B 16 LES engines | 14.75 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
Lambda sensor | 30.98 lbf⋅ft |
Connecting strut between the subframe and the front structure | 36.88 lbf⋅ft |
Engine bracket | 44.25 lbf⋅ft |
On chassis | 44.25 lbf⋅ft |
Replace screws. |
First stage | 59 lbf⋅ft |
Replace screws. | |
Second stage | 45–60° |
First stage | 66.38 lbf⋅ft |
Replace screws. | |
Second stage | 45–60° |
First stage | 59 lbf⋅ft |
Second stage | 45–60° |
First stage | 59 lbf⋅ft |
Second stage | 45–60° |
First stage | 59 lbf⋅ft |
Second stage | 45–60° |
Clamps | 11.06 lbf⋅ft |
Clamps at the turbocharger | 9.59 lbf⋅ft |
Otherwise | 16.23 lbf⋅ft |
All Opel gasoline straight-4 1.4 L B 14 XEJ engines | 16.23 lbf⋅ft |
Replace screws. | |
All other modifications | 17.7 lbf⋅ft |
Replace screws and nuts. |
Screws | 16.23 lbf⋅ft |
All Opel gasoline straight-4 1.2 L B 12 XEL engines | 7.38 lbf⋅ft |
All Opel gasoline straight-4 1.6 L B 16 LES engines | 16.96 lbf⋅ft |
All other modifications | 16.23 lbf⋅ft |
First stage | 4.43 lbf⋅ft |
Second stage | 18.44 lbf⋅ft |
First stage | 11.06 lbf⋅ft |
Replace nuts. | |
Second stage | 30° |
First stage | 5.9 lbf⋅ft |
Tighten new nuts evenly in several steps. | |
Second stage | 5.9 lbf⋅ft |
Control tensioner |
All Opel gasoline straight-4 1.6 L B 16 LES engines | 5.9 lbf⋅ft |
Tighten nuts and screws crosswise in inside-to-outside order. | |
All other modifications | 16.23 lbf⋅ft |
Replace nuts. |
All Opel gasoline straight-4 1.4 L B 14 NEH engines | 5.9 lbf⋅ft |
All Opel gasoline straight-4 1.4 L B 14 XEJ engines | 5.9 lbf⋅ft |
All Opel gasoline straight-4 1.6 L B 16 LES engines | 5.9 lbf⋅ft |
All other modifications | 7.38 lbf⋅ft |
All Opel diesel straight-4 1.2 L B 13 DTC engines | 36.88 lbf⋅ft |
All Opel diesel straight-4 1.2 L B 13 DTE engines | 36.88 lbf⋅ft |
All Opel diesel straight-4 1.2 L B 13 DTR engines | 36.88 lbf⋅ft |
Clamps | 36.88 lbf⋅ft |
Nuts | 14.75 lbf⋅ft |
All other modifications | 14.75 lbf⋅ft |
All Opel gasoline straight-4 1.4 L B 14 XEJ engines | 16.23 lbf⋅ft |
All other modifications | 14.75 lbf⋅ft |
Exhaust pipe rear | 25.81 lbf⋅ft |
Nuts | 18.44 lbf⋅ft |
Screws | 36.88 lbf⋅ft |
All Opel diesel straight-4 1.2 L B 13 DTC engines | 5.9 lbf⋅ft |
All Opel diesel straight-4 1.2 L B 13 DTE engines | 6.64 lbf⋅ft |
All Opel diesel straight-4 1.2 L B 13 DTR engines | 6.64 lbf⋅ft |
All Opel gasoline straight-3 1.0 L B 10 XFL engines | 12.54 lbf⋅ft |
All Opel gasoline straight-3 1.0 L B 10 XFT engines | 12.54 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
All Opel gasoline straight-3 1.0 L B 10 XFL engines | 42.78 lbf⋅ft |
All Opel diesel straight-4 1.2 L B 13 DTC engines | 16.23 lbf⋅ft |
All Opel diesel straight-4 1.2 L B 13 DTE engines | 16.23 lbf⋅ft |
All Opel diesel straight-4 1.2 L B 13 DTR engines | 16.23 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2027 Opel Corsa Hatchback user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Opel warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Hydraulic System Oil Capacity
- Manual Transmission Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Drive Belts Specifications
- Electrical System Specifications
- Emission
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Opel Corsa Hatchback service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2027 Opel Corsa Hatchback you're not only saving money, but also also improving your technical skills and learning something new.