2010 Opel Corsa Box Van D Engine Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–) | 7.38 lbf⋅ft |
M10 | 40.57 lbf⋅ft |
M8 | 14.75 lbf⋅ft |
1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–) | 18.44 lbf⋅ft |
1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–) | 14.75 lbf⋅ft |
1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–) | 25.81 lbf⋅ft |
On exhaust manifold | 18.44 lbf⋅ft |
Replace nuts. Use hot screw paste. |
All Opel diesel straight-4 1.2 L Z 13 DTH engines | 16.23 lbf⋅ft |
Replace sealing rings. |
A13DTC engine | 8.85 lbf⋅ft |
Replace sealing rings. | |
Z13DTJ engine | 16.23 lbf⋅ft |
Replace sealing rings. |
Turbocharger oil return line | 6.64 lbf⋅ft |
Replace sealing rings. |
1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–) | 5.9 lbf⋅ft |
1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–) | 14.75 lbf⋅ft |
1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–) | 5.9 lbf⋅ft |
helically from the inside out |
First stage | 18.44 lbf⋅ft |
Use new screws. See figure 1. | |
Second stage | 60° |
Third stage | 60° |
Fourth stage | 60° |
1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–) | 5.9 lbf⋅ft |
First stage | 9.59 lbf⋅ft |
Use new screws. | |
Second stage | 60° |
Third stage | 15° |
First stage | 110.63 lbf⋅ft |
Use new screw. | |
Second stage | 45° |
Third stage | 15° |
1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–) | 5.9 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 30° |
Third stage | 15° |
All other modifications | 32.45 lbf⋅ft |
Clean the thread, use new screws and screw-locking compound. |
First stage | 18.44 lbf⋅ft |
Use new screws. | |
Second stage | 60° |
Third stage | 15° |
Fourth stage | 7.38 lbf⋅ft |
Use new screws. | |
Fifth stage | 60° |
Sixth stage | 15° |
1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–) | 5.9 lbf⋅ft |
1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–) | 5.9 lbf⋅ft |
1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–) | 14.75 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Use new screw. | |
Second stage | 60° |
1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–) | 5.9 lbf⋅ft |
M10 | 25.81 lbf⋅ft |
M6 | 5.9 lbf⋅ft |
1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–) | 7.38 lbf⋅ft |
Oil filter cover | 18.44 lbf⋅ft |
On the engine block | 14.75 lbf⋅ft |
At the gearbox | 29.5 lbf⋅ft |
On the engine block | 7.38 lbf⋅ft |
1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–) | 4.43 lbf⋅ft |
1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–) | 5.9 lbf⋅ft |
All Opel diesel straight-4 1.2 L Z 13 DTH engines | 33.19 lbf⋅ft |
Z13DTJ engine | 33.19 lbf⋅ft |
1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–) | 14.75 lbf⋅ft |
All Opel diesel straight-4 1.2 L A 13 DTC engines | 33.19 lbf⋅ft |
Use hot screw paste | |
All Opel gasoline straight-4 1.2 L Z 12 XEP engines | 29.5 lbf⋅ft |
All Opel diesel straight-4 1.2 L Z 13 DTJ engines | 33.19 lbf⋅ft |
Use hot screw paste |
1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–) | 44.25 lbf⋅ft |
On chassis | 44.25 lbf⋅ft |
First stage | 59 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 66.38 lbf⋅ft |
Second stage | 45° |
First stage | 66.38 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
Otherwise | 15° |
First stage | 59 lbf⋅ft |
Second stage | 45° |
First stage | 59 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 59 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
At the turbocharger | 18.44 lbf⋅ft |
Use hot screw paste |
All Opel diesel straight-4 1.2 L Z 13 DTH engines | 18.44 lbf⋅ft |
At the gearbox | 18.44 lbf⋅ft |
At the turbocharger | 18.44 lbf⋅ft |
Differential pressure sensor lines | 33.19 lbf⋅ft |
1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–) | 16.23 lbf⋅ft |
Tighten in several steps. |
M6 | 6.64 lbf⋅ft |
M8 | 18.44 lbf⋅ft |
Engine suspension eye |
On particle filter | 14.75 lbf⋅ft |
A13DTC engine | 18.44 lbf⋅ft |
A13DTC engine | 6.64 lbf⋅ft |
1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–) | 18.44 lbf⋅ft |
1.2 with gasoline straight-4 1.2 L 79 HP engine (2009.7–) | 18.44 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2010 Opel Corsa Box Van user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Opel warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Brake Fluid Capacity
- Clutch Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Opel Corsa Box Van service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2010 Opel Corsa Box Van you're not only saving money, but also also improving your technical skills and learning something new.
2010 Opel Corsa Box Van generations
In 2010 Opel offered 3 generations of the Corsa Box Van. Engine fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.