2001 Opel Combo Box Van B Engine Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
17 D (4EE1) engine | 16.23 lbf⋅ft |
X17D (4EE1) engine | 18.44 lbf⋅ft |
Lower section of intake manifold | 14.75 lbf⋅ft |
Replace nuts. | |
Upper section of intake manifold | 5.9 lbf⋅ft |
All other modifications | 16.23 lbf⋅ft |
Replace screws and nuts. |
Alternator | 18.44 lbf⋅ft |
On the engine block | 18.44 lbf⋅ft |
Alternator | 14.75 lbf⋅ft |
On the engine block | 14.75 lbf⋅ft |
1.4 16V with gasoline straight-4 1.4 L 89 HP engine (1999.8–2001.10) | 25.81 lbf⋅ft |
Air-conditioning compressor bracket | 18.44 lbf⋅ft |
At the bracket | 36.88 lbf⋅ft |
M10 | 29.5 lbf⋅ft |
M8 | 22.13 lbf⋅ft |
M10 screws | 29.5 lbf⋅ft |
M8 screws | 22.13 lbf⋅ft |
All Opel diesel straight-4 1.7 L 17 D (4EE1) engines | 36.88 lbf⋅ft |
With ribbed V-belt | 25.81 lbf⋅ft |
Otherwise | 29.5 lbf⋅ft |
All Opel diesel straight-4 1.7 L X 17 D (4EE1) engines | 36.88 lbf⋅ft |
Alternator | 14.75 lbf⋅ft |
On the engine block | 14.75 lbf⋅ft |
Power steering pump bracket | 29.5 lbf⋅ft |
Hydraulic lines at the servo-steering pump | 20.65 lbf⋅ft |
1.4 16V with gasoline straight-4 1.4 L 89 HP engine (1999.8–2001.10) | 14.75 lbf⋅ft |
Fuel-distributing pipe | 6.64 lbf⋅ft |
Injection hoses | 18.44 lbf⋅ft |
At the bracket | 33.19 lbf⋅ft |
On the engine block | 18.44 lbf⋅ft |
Injection pump pulley | 47.2 lbf⋅ft |
All Opel diesel straight-4 1.7 L 17 D (4EE1) engines | 17.7 lbf⋅ft |
All Opel diesel straight-4 1.7 L X 17 D (4EE1) engines | 17.7 lbf⋅ft |
All other modifications | 5.9 lbf⋅ft |
X17D (4EE1) engine | 14.75 lbf⋅ft |
All Opel diesel straight-4 1.7 L 17 D (4EE1) engines | 18.44 lbf⋅ft |
All Opel diesel straight-4 1.7 L X 17 D (4EE1) engines | 18.44 lbf⋅ft |
All other modifications | 5.9 lbf⋅ft |
First stage | 18.44 lbf⋅ft |
Replace screws. See figure 1. | |
Second stage | 60° |
Third stage | 60° |
Fourth stage | 60° |
First stage | 18.44 lbf⋅ft |
Use new screws See figure 1. | |
Second stage | 90° |
Third stage | 90° |
Fourth stage | 90° |
Fifth stage | 45° |
First stage | 18.44 lbf⋅ft |
Use new screws See figure 1. | |
Second stage | 60° |
Third stage | 60° |
Fourth stage | 60° |
17 D (4EE1) engine | 5.9 lbf⋅ft |
X17D (4EE1) engine | 7.38 lbf⋅ft |
All other modifications | 5.9 lbf⋅ft |
First stage | 25.81 lbf⋅ft |
Replace screws and nuts. | |
Second stage | 45° |
Third stage | 15° |
First stage | 18.44 lbf⋅ft |
Replace screws and nuts. | |
Second stage | 100° |
Third stage | 15° |
First stage | 18.44 lbf⋅ft |
Replace screws and nuts. | |
Second stage | 30° |
First stage | 18.44 lbf⋅ft |
Second stage | 30° |
Screw with thread length 15 mm | 18.44 lbf⋅ft |
Replace screws and nuts. |
First stage | 18.44 lbf⋅ft |
Replace screws and nuts. | |
Second stage | 30° |
All Opel diesel straight-4 1.7 L 17 D (4EE1) engines | 98.1–118.75 lbf⋅ft |
First stage | 70.07 lbf⋅ft |
Replace screws and nuts. | |
Second stage | 30° |
Third stage | 15° |
All Opel diesel straight-4 1.7 L X 17 D (4EE1) engines | 98.1–118.75 lbf⋅ft |
First stage | 70.07 lbf⋅ft |
Use new screw. | |
Second stage | 30° |
Third stage | 15° |
Crankshaft pulley | 14.75 lbf⋅ft |
First stage | 47.94 lbf⋅ft |
Replace screws and nuts. | |
Second stage | 30° |
Third stage | 15° |
First stage | 22.13 lbf⋅ft |
Replace screws and nuts. | |
Second stage | 45–60° |
First stage | 25.81 lbf⋅ft |
Clean thread and use new screws. | |
Second stage | 30° |
Third stage | 15° |
Flywheel cover | 5.16 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Replace screws and nuts. | |
Second stage | 45° |
Third stage | 15° |
X17D (4EE1) engine | 64.91 lbf⋅ft |
Replace screws and nuts. |
First stage | 36.88 lbf⋅ft |
Replace screws and nuts. | |
Second stage | 45° |
Third stage | 15° |
1.4 16V with gasoline straight-4 1.4 L 89 HP engine (1999.8–2001.10) | 18.44 lbf⋅ft |
All Opel diesel straight-4 1.7 L 17 D (4EE1) engines | 10.33 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 60° |
Third stage | 15° |
All Opel diesel straight-4 1.7 L X 17 D (4EE1) engines | 10.33 lbf⋅ft |
All other modifications | 33.19 lbf⋅ft |
All Opel diesel straight-4 1.7 L 17 D (4EE1) engines | 7.38 lbf⋅ft |
All Opel diesel straight-4 1.7 L X 17 D (4EE1) engines | 7.38 lbf⋅ft |
All other modifications | 2.95 lbf⋅ft |
1.4 16V with gasoline straight-4 1.4 L 89 HP engine (1999.8–2001.10) | 2.95 lbf⋅ft |
1.4 16V with gasoline straight-4 1.4 L 89 HP engine (1999.8–2001.10) | 2.95 lbf⋅ft |
All Opel diesel straight-4 1.7 L 17 D (4EE1) engines | 14.01 lbf⋅ft |
All Opel gasoline straight-4 1.4 L X 14 XE engines | 14.75 lbf⋅ft |
All Opel diesel straight-4 1.7 L X 17 D (4EE1) engines | 14.01 lbf⋅ft |
Toothed belt tightener | 14.75 lbf⋅ft |
One-part sump | 33.19 lbf⋅ft |
Two-part oil sump | 7.38 lbf⋅ft |
X17D (4EE1) engine | 57.53 lbf⋅ft |
All Opel gasoline straight-4 1.4 L C 14 SE engines | 40.57 lbf⋅ft |
Sheet-steel sump | 40.57 lbf⋅ft |
Torx screws | 10.33 lbf⋅ft |
With hexagon-head screws | 33.19 lbf⋅ft |
1.4 16V with gasoline straight-4 1.4 L 89 HP engine (1999.8–2001.10) | 11.06 lbf⋅ft |
Oil filter housing | 11.06 lbf⋅ft |
Oil pump | 7.38 lbf⋅ft |
One-part sump | 5.9 lbf⋅ft |
Clean the thread and use screw-locking compound. |
At the gearbox | 29.5 lbf⋅ft |
On the engine block | 14.75 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Second stage | 30° |
X17D (4EE1) engine | 7.38 lbf⋅ft |
M10 | 29.5 lbf⋅ft |
M8 | 14.75 lbf⋅ft |
On the engine block | 7.38 lbf⋅ft |
One-part sump | 5.9 lbf⋅ft |
Use screw-locking compound. |
On the engine block | 7.38 lbf⋅ft |
Clean the thread and use screw-locking compound. |
M10 | 29.5 lbf⋅ft |
M8 | 14.75 lbf⋅ft |
Sheet-steel sump | 7.38 lbf⋅ft |
Clean the thread and use screw-locking compound. |
M10 | 29.5 lbf⋅ft |
M8 | 14.75 lbf⋅ft |
On the engine block | 7.38 lbf⋅ft |
Clean the thread and use screw-locking compound. |
1.4 16V with gasoline straight-4 1.4 L 89 HP engine (1999.8–2001.10) | 5.9 lbf⋅ft |
Use screw-locking compound. |
At the bracket | 5.9 lbf⋅ft |
Glow plugs | 14.75 lbf⋅ft |
M10 | 9.59 lbf⋅ft |
M8 | 14.75 lbf⋅ft |
Lambda sensor | 22.13 lbf⋅ft |
Use heat-resistant grease. |
Right | 33.19 lbf⋅ft |
Right | 44.25 lbf⋅ft |
Front | 47.94 lbf⋅ft |
Rear | 47.94 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Third stage | 15° |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Third stage | 15° |
17 D (4EE1) engine | 16.23 lbf⋅ft |
X17D (4EE1) engine | 22.13 lbf⋅ft |
All other modifications | 16.23 lbf⋅ft |
Replace screws and nuts. |
All Opel gasoline straight-4 1.2 L C 12 NZ engines | 18.44 lbf⋅ft |
All Opel gasoline straight-4 1.4 L C 14 SE engines | 18.44 lbf⋅ft |
All Opel gasoline straight-4 1.2 L X 12 SZ engines | 18.44 lbf⋅ft |
All Opel gasoline straight-4 1.4 L X 14 XE engines | 25.81 lbf⋅ft |
All Opel gasoline straight-4 1.4 L C 14 NZ engines | 14.75 lbf⋅ft |
All Opel gasoline straight-4 1.4 L X 14 SZ engines | 14.75 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
M10 | 29.5 lbf⋅ft |
M12 | 55.32 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2001 Opel Combo Box Van user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Opel warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Steering Fluid Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Drive Belts Specifications
- Electrical System Specifications
- Emission
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Opel Combo Box Van service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2001 Opel Combo Box Van you're not only saving money, but also also improving your technical skills and learning something new.
2001 Opel Combo Box Van generations
In 2001 Opel offered 2 generations of the Combo Box Van. Engine fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.