1992 Opel Calibra First generation Engine Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
All other modifications | 16.23 lbf⋅ft |
Replace screws and nuts. |
All other modifications | 14.75 lbf⋅ft |
All Opel gasoline straight-4 2.0 L C 20 XE engines | 18.44 lbf⋅ft |
All other modifications | 14.75 lbf⋅ft |
Servo pump pulley | 14.75 lbf⋅ft |
Coolant pump | 18.44 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Second stage | 30° |
Third stage | 30° |
M6 | 7.38 lbf⋅ft |
M8 | 14.75 lbf⋅ft |
M6 | 7.38 lbf⋅ft |
M8 | 14.75 lbf⋅ft |
All other modifications | 5.9 lbf⋅ft |
First stage | 18.44 lbf⋅ft |
Use new screws See figure 1. | |
Second stage | 90° |
Third stage | 90° |
Fourth stage | 90° |
First stage | 18.44 lbf⋅ft |
Use new screws. See figure 1. | |
Second stage | 90° |
Third stage | 90° |
Fourth stage | 90° |
First stage | 18.44 lbf⋅ft |
Use new screws. See figure 1. | |
Second stage | 90° |
Third stage | 90° |
Fourth stage | 90° |
First stage | 18.44 lbf⋅ft |
Use new screws See figure 1. | |
Second stage | 90° |
Third stage | 90° |
Fourth stage | 90° |
Fifth stage | 15° |
Valve cover | 5.9 lbf⋅ft |
First stage | 25.81 lbf⋅ft |
Replace screws and nuts. | |
Second stage | 45° |
Third stage | 15° |
First stage | 184.39 lbf⋅ft |
Use new screw. | |
Second stage | 40–50° |
First stage | 95.88 lbf⋅ft |
Use new screw. | |
Second stage | 40–50° |
First stage | 95.88 lbf⋅ft |
Use new screw. | |
Second stage | 40–50 |
First stage | 184.39 lbf⋅ft |
Use new screw. | |
Second stage | 40–50 |
Crankshaft pulley | 14.75 lbf⋅ft |
First stage | 47.94 lbf⋅ft |
Use screw-locking compound. | |
Second stage | 30° |
Third stage | 15° |
First stage | 44.25 lbf⋅ft |
Second stage | 30° |
Third stage | 15° |
First stage | 47.94 lbf⋅ft |
Replace screws and nuts. | |
Second stage | 30° |
Third stage | 15° |
First stage | 36.88 lbf⋅ft |
Replace screws and nuts. | |
Second stage | 45° |
Third stage | 15° |
First stage | 36.88 lbf⋅ft |
Replace screws and nuts. | |
Second stage | 60° |
Third stage | 15° |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 60° |
Third stage | 15° |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 60° |
Third stage | 15° |
All Opel gasoline straight-4 2.0 L C 20 LET engines | 4.43 lbf⋅ft |
All other modifications | 5.9 lbf⋅ft |
Toothed belt guard at the bottom | 4.43 lbf⋅ft |
Toothed belt guard at the top | 4.43 lbf⋅ft |
First stage | 18.44 lbf⋅ft |
Use new screw. | |
Second stage | 45° |
Third stage | 15° |
Otherwise | 18.44 lbf⋅ft |
First stage | 18.44 lbf⋅ft |
Use new screw. | |
Second stage | 45° |
Third stage | 15° |
Otherwise | 18.44 lbf⋅ft |
All other modifications | 14.75 lbf⋅ft |
All Opel gasoline straight-4 2.0 L C 20 LET engines | 40.57 lbf⋅ft |
All Opel gasoline straight-4 2.0 L C 20 NE engines | 33.19 lbf⋅ft |
Torx screws | 7.38 lbf⋅ft |
With hexagon-head screws | 33.19 lbf⋅ft |
Oil filter housing | 11.06 lbf⋅ft |
All Opel gasoline straight-4 2.0 L C 20 NE engines | 7.38 lbf⋅ft |
Clean the thread and use screw-locking compound. |
At the gearbox | 29.5 lbf⋅ft |
On the engine block | 14.75 lbf⋅ft |
Clean the thread and use screw-locking compound. |
First stage | 5.9 lbf⋅ft |
Clean the thread, use new screws and screw-locking compound. | |
Second stage | 30° |
All other modifications | 11.06 lbf⋅ft |
Clean the thread and use screw-locking compound. |
Crankshaft sensor | 5.9 lbf⋅ft |
All Opel gasoline straight-4 2.0 L C 20 XE engines | 14.75 lbf⋅ft |
All other modifications | 9.59 lbf⋅ft |
All other modifications | 22.13 lbf⋅ft |
2.0 i Turbo 4x4 with gasoline straight-4 2.0 L 201 HP at 5600 RPM, 280 N⋅m at 2400 RPM engine (1992.3–1997.7) | 44.25 lbf⋅ft |
At the bracket | 44.25 lbf⋅ft |
On chassis | 47.94 lbf⋅ft |
Use screw-locking compound. |
All other modifications | 16.23 lbf⋅ft |
Replace screws and nuts. |
Spark plugs | 18.44 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 1992 Opel Calibra user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Opel warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Opel Calibra service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 1992 Opel Calibra you're not only saving money, but also also improving your technical skills and learning something new.