Pivot arm with integral brake caliper mounting support
20.65 lbf⋅ft20.65 lbf⋅ft28 N⋅m
Otherwise
20.65 lbf⋅ft20.65 lbf⋅ft28 N⋅m
Front axle brake caliper mounting support
73.76 lbf⋅ft73.76 lbf⋅ft100 N⋅m
Clean the thread and use screw-locking compound.
expand_moreFront axle brake disc
Pivot arm with integral brake caliper mounting support
5.16 lbf⋅ft5.16 lbf⋅ft7 N⋅m
Otherwise
2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m
expand_moreFront axle steering
expand_morePressure line at steering gear
expand_more1.2 16V with gasoline straight-4 1.2 L 74 HP at 5600 RPM, 110 N⋅m at 4000 RPM engine (2000.9–2005.1)
Manufacturer Delphi
20.65 lbf⋅ft20.65 lbf⋅ft28 N⋅m
TRW
22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
expand_more2.0 DI with diesel straight-4 2.0 L 80 HP at 4300 RPM, 185 N⋅m at 1800 RPM engine (1998.9–2005.1)
Manufacturer Delphi
20.65 lbf⋅ft20.65 lbf⋅ft28 N⋅m
TRW
22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
expand_more2.0 DTI 16V with diesel straight-4 2.0 L 99 HP at 4300 RPM, 205 N⋅m at 1600 RPM engine (1999.8–2005.1)
Manufacturer Delphi
20.65 lbf⋅ft20.65 lbf⋅ft28 N⋅m
TRW
22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
expand_more2.2 16V with gasoline straight-4 2.2 L 145 HP at 5800 RPM, 203 N⋅m at 4000 RPM engine (2001.3–2005.1)
Manufacturer Delphi
20.65 lbf⋅ft20.65 lbf⋅ft28 N⋅m
TRW
22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
expand_moreAll other modifications
Manufacturer Delphi
22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
TRW
20.65 lbf⋅ft20.65 lbf⋅ft28 N⋅m
expand_moreReturn line to steering gear
expand_more1.2 16V with gasoline straight-4 1.2 L 74 HP at 5600 RPM, 110 N⋅m at 4000 RPM engine (2000.9–2005.1)
Manufacturer Delphi
20.65 lbf⋅ft20.65 lbf⋅ft28 N⋅m
TRW
22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
expand_more2.0 DI with diesel straight-4 2.0 L 80 HP at 4300 RPM, 185 N⋅m at 1800 RPM engine (1998.9–2005.1)
Manufacturer Delphi
20.65 lbf⋅ft20.65 lbf⋅ft28 N⋅m
TRW
22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
expand_more2.0 DTI 16V with diesel straight-4 2.0 L 99 HP at 4300 RPM, 205 N⋅m at 1600 RPM engine (1999.8–2005.1)
Manufacturer Delphi
20.65 lbf⋅ft20.65 lbf⋅ft28 N⋅m
TRW
22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
expand_more2.2 16V with gasoline straight-4 2.2 L 145 HP at 5800 RPM, 203 N⋅m at 4000 RPM engine (2001.3–2005.1)
Manufacturer Delphi
20.65 lbf⋅ft20.65 lbf⋅ft28 N⋅m
TRW
22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
expand_moreAll other modifications
Manufacturer Delphi
22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
TRW
20.65 lbf⋅ft20.65 lbf⋅ft28 N⋅m
expand_moreSteering gear
First stage
33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m
Second stage
45°45°45°
Third stage
15°15°15°
Track rod end on stub axle
36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace nuts.
Track rod end on track rod
44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
Track rod on steering gear
66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Clean the thread and use screw-locking compound.
expand_moreFront axle suspension
Shock-absorber piston rod
36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace nuts.
expand_moreSuspension strut
expand_more1.2 16V with gasoline straight-4 1.2 L 74 HP at 5600 RPM, 110 N⋅m at 4000 RPM engine (2000.9–2005.1)
First stage
36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace screws and nuts.
Second stage
66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
expand_moreThird stage
First step
45°45°45°
Second step
15°15°15°
expand_more2.0 DI with diesel straight-4 2.0 L 80 HP at 4300 RPM, 185 N⋅m at 1800 RPM engine (1998.9–2005.1)
First stage
36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace screws and nuts.
Second stage
66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
expand_moreThird stage
First step
45°45°45°
Second step
15°15°15°
expand_more2.0 DTI 16V with diesel straight-4 2.0 L 99 HP at 4300 RPM, 205 N⋅m at 1600 RPM engine (1999.8–2005.1)
On chassis
40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m
Replace nuts.
expand_more2.2 16V with gasoline straight-4 2.2 L 145 HP at 5800 RPM, 203 N⋅m at 4000 RPM engine (2001.3–2005.1)
On chassis
40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m
Replace nuts.
expand_moreAll other modifications
On chassis
40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m
expand_moreOn stub axle
First stage
36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace screws and nuts.
expand_moreSecond stage
First step
66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Second step
45°45°45°
Third step
15°15°15°
expand_moreWheel suspension
expand_moreFront axle drive shaft
expand_moreCentral nuts
First stage
88.51 lbf⋅ft88.51 lbf⋅ft120 N⋅m
Replace nuts.
Second stage
slacken
Third stage
14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Fourth stage
80°80°80°
Front axle stabiliser mounting
14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Stabiliser mounting at the stabiliser
47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Replace screws and nuts.
Stabiliser mounting at suspension strut
47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Replace screws and nuts.
Stabilizer mounting at the subframe
14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Support joint at the stub axle
36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace nuts.
Support joint at the transverse control arm
25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
expand_moreTransverse control arm
First stage
66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Screws and nuts must be replaced.
Second stage
75°75°75°
Important! Do not tighten the transverse control arm screws until the vehicle is on the ground.
Third stage
15°15°15°
expand_moreWheel hub wheel bearing
expand_more1.8 16V with gasoline straight-4 1.8 L 123 HP engine (2000.6–2005.1)
expand_moreCentral nuts
First stage
88.51 lbf⋅ft88.51 lbf⋅ft120 N⋅m
Second stage
slacken
Third stage
14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Fourth stage
80°80°80°
expand_moreOn stub axle
First stage
66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Second stage
30°30°30°
Third stage
15°15°15°
expand_more2.0 DI with diesel straight-4 2.0 L 80 HP at 4300 RPM, 185 N⋅m at 1800 RPM engine (1998.9–2005.1)
expand_moreCentral nuts
First stage
88.51 lbf⋅ft88.51 lbf⋅ft120 N⋅m
Replace nuts.
Second stage
slacken
Third stage
14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Fourth stage
80°80°80°
expand_moreWheel bearing unit
First stage
66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Replace screws.
Second stage
30°30°30°
Third stage
15°15°15°
expand_more2.2 16V with gasoline straight-4 2.2 L 145 HP at 5800 RPM, 203 N⋅m at 4000 RPM engine (2001.3–2005.1)
expand_moreCentral nuts
First stage
88.51 lbf⋅ft88.51 lbf⋅ft120 N⋅m
Replace nuts.
Second stage
slacken
Third stage
14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Fourth stage
80°80°80°
expand_moreWheel bearing unit
First stage
66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Replace screws.
Second stage
30°30°30°
Third stage
15°15°15°
expand_moreAll other modifications
First stage
88.51 lbf⋅ft88.51 lbf⋅ft120 N⋅m
Second stage
slacken
Third stage
14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Fourth stage
80°80°80°
expand_moreWheels and tires
Wheel attachment
81.13 lbf⋅ft81.13 lbf⋅ft110 N⋅m
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2001 Opel Astra Sedan user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Opel warranty policy for your region. In some regions DIY service may invalidate your warranty.
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Opel Astra Sedan service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2001 Opel Astra Sedan you're not only saving money, but also also improving your technical skills and learning something new.