in your garage to make future searches easy.

Condition Value
expand_moreAxle drive
Drive shaft intermediate bearing 18.44 lbf⋅ft
expand_moreFront axle drive shaft
Central nuts 129.07 lbf⋅ft
Replace nuts.
expand_moreClutch
expand_moreBell-housing
On the engine block 40.57 lbf⋅ft
expand_moreClutch pressure plate
Opel gasoline straight-3 1.0 L K10B 67 HP 16.96 lbf⋅ft
Opel diesel straight-4 1.2 L Z 13 DTJ 74 HP 11.06 lbf⋅ft
Opel diesel straight-4 1.2 L D13A 74 HP at 4000 RPM, 190 N⋅m at 1750 RPM 11.06 lbf⋅ft
Opel gasoline straight-4 1.2 L K12B 93 HP 16.96 lbf⋅ft
All other modifications 22.13 lbf⋅ft
Clutch slave cylinder 7.38 lbf⋅ft
Clutch slave cylinder bleeder valve 7.38 lbf⋅ft
expand_moreGear shifting
Selector cable linkage 40.57 lbf⋅ft
expand_moreGearbox
Gearbox flange connection at engine 40.57 lbf⋅ft
Torque converter 16.96 lbf⋅ft
expand_moreGearbox lubrication
expand_moreGearbox oil drain plug
expand_moreWith automatic gearbox
80-40LS gearboxes 12.54 lbf⋅ft
expand_moreWith manual transmission
MF60B gearbox 15.49 lbf⋅ft
Use screw-locking compound.
expand_moreGearbox oil filler plug
expand_moreWith manual transmission
MF60B gearbox 15.49 lbf⋅ft
Use screw-locking compound.
expand_moreGearbox mounting
expand_moreGearbox mounting
expand_more1.0 LPG with gasoline straight-3 1.0 L 64 HP at 6000 RPM, 90 N⋅m at 3600 RPM engine (2010.1–)
Screws at the gearbox bracket 40.57 lbf⋅ft
At the bearing pedestal 68.59 lbf⋅ft
expand_more1.0 with gasoline straight-3 1.0 L 64 HP at 6000 RPM, 90 N⋅m at 3600 RPM engine (2008.4–)
Screws at the gearbox bracket 40.57 lbf⋅ft
At the bearing pedestal 68.59 lbf⋅ft
expand_more1.3 CDTI with diesel straight-4 1.2 L 74 HP engine (2008.4–)
Central screws 62.69 lbf⋅ft
expand_moreAll other modifications
Screws at the gearbox bracket 40.57 lbf⋅ft
At the bearing pedestal 62.69 lbf⋅ft
expand_moreGearbox support
expand_more1.0 LPG with gasoline straight-3 1.0 L 64 HP at 6000 RPM, 90 N⋅m at 3600 RPM engine (2010.1–)
At the gearbox bracket 68.59 lbf⋅ft
At the gearbox 40.57 lbf⋅ft
expand_moreBearing pedestal
On chassis 18.44 lbf⋅ft
expand_more1.0 with gasoline straight-3 1.0 L 64 HP at 6000 RPM, 90 N⋅m at 3600 RPM engine (2008.4–)
At the gearbox bracket 68.59 lbf⋅ft
At the gearbox 40.57 lbf⋅ft
expand_moreBearing pedestal
On chassis 18.44 lbf⋅ft
expand_more1.3 CDTI with diesel straight-4 1.2 L 74 HP engine (2008.4–)
expand_moreAt the gearbox
Front 40.57 lbf⋅ft
Rear 62.69 lbf⋅ft
expand_moreAll other modifications
At the gearbox bracket 62.69 lbf⋅ft
At the gearbox 40.57 lbf⋅ft
expand_moreBearing pedestal
On chassis 18.44 lbf⋅ft

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2011 Opel Agila user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Opel warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Opel Agila service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2011 Opel Agila you're not only saving money, but also also improving your technical skills and learning something new.

Units:
facebook twitter reddit linkedin messenger whatsapp telegram skype email chat