in your garage to make future searches easy.

Condition Value
expand_moreFront axle brake
Bleed valve 5.16 lbf⋅ft
Brake hose 11.8 lbf⋅ft
expand_moreFront axle brake caliper
With 14" chassis 22.13 lbf⋅ft
With 15" chassis 20.65 lbf⋅ft
With 16" chassis 20.65 lbf⋅ft
All other modifications 22.13 lbf⋅ft
Front axle brake caliper mounting support 77.44 lbf⋅ft
Replace screws.
Front axle brake disc 5.16 lbf⋅ft
Wheel speed sensor 5.9 lbf⋅ft
expand_moreFront axle steering
expand_moreLower steering column joint
First stage 33.19 lbf⋅ft
Use new screws or nuts
Second stage 3045°
expand_moreSteering gear
First stage 33.19 lbf⋅ft
Replace nuts.
Second stage 90105°
expand_moreTrack rod end on stub axle
First stage 22.13 lbf⋅ft
Replace nuts.
Second stage 180195°
Track rod end on track rod 47.94 lbf⋅ft
expand_moreTrack rod on steering gear
All Opel gasoline straight-4 1.2 L A 12 XEL engines 47.94 lbf⋅ft
All Opel gasoline straight-4 1.2 L B 12 XEL engines 47.94 lbf⋅ft
All other modifications 60.48 lbf⋅ft
expand_moreFront axle suspension
Shock-absorber piston rod 33.19 lbf⋅ft
Replace nuts.
expand_moreSuspension strut
expand_moreOn wheel hub
First stage 59 lbf⋅ft
Replace screws and nuts.
Second stage 6075°
expand_moreAll other modifications
On chassis 33.19 lbf⋅ft
expand_moreOn stub axle
First stage 59 lbf⋅ft
Use new screws and nuts.
Second stage 6075°
expand_moreWheel suspension
expand_moreFront axle drive shaft
First stage 51.63 lbf⋅ft
Replace nuts.
Second stage 5565°
Front axle stabiliser mounting 18.44 lbf⋅ft
Replace screws.
Stabiliser mounting at the stabiliser 36.88 lbf⋅ft
Replace nuts.
Stabiliser mounting at suspension strut 36.88 lbf⋅ft
Replace nuts.
Stabilizer mounting at the subframe 18.44 lbf⋅ft
Support joint at the stub axle 42.78 lbf⋅ft
Support joint at the transverse control arm 25.81 lbf⋅ft
Support joint bottom down on the wishbone 25.81 lbf⋅ft
Replace screws.
Supporting bottom joint on the suspension strut mounting 42.78 lbf⋅ft
Replace nuts.
expand_moreTransverse control arm
First stage 66.38 lbf⋅ft
Replace screws and nuts.
Second stage 7590°
expand_moreTrack control arm lower
First stage 66.38 lbf⋅ft
Replace screws and nuts.
Second stage 7590°
expand_moreWheel hub wheel bearing
expand_moreCentral nuts
First stage 51.63 lbf⋅ft
Replace nuts.
Second stage 5565°
expand_moreWheels and tires
expand_moreTire pressure sensors
All Opel gasoline straight-4 1.2 L A 12 XEL engines 11.51 lbf⋅in
All Opel gasoline straight-4 1.4 L A 14 XER engines 11.51 lbf⋅in
All Opel gasoline straight-4 1.2 L B 12 XEL engines 11.51 lbf⋅in
All Opel gasoline straight-4 1.4 L B 14 XER engines 11.51 lbf⋅in
All other modifications 7.38 lbf⋅ft
Wheel attachment 81.13 lbf⋅ft

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2017 Opel Adam user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Opel warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Opel Adam service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2017 Opel Adam you're not only saving money, but also also improving your technical skills and learning something new.

Units:
facebook twitter reddit linkedin messenger whatsapp telegram skype email chat