2017 Kia Sorento Second generation facelift Rear Suspension Fastener Tightening Specifications
in your garage to make future searches easy.
| Condition | Value |
|---|
| Wheel bearing unit | 59–66.38 lbf⋅ft |
| Rear axle brake caliper | 16.23–22.13 lbf⋅ft |
| Rear axle brake caliper mounting support | 47.2–54.58 lbf⋅ft |
| Rear axle brake disc | 4.43 lbf⋅ft |
| At the axle support | 103.26–118.01 lbf⋅ft |
| Vehicles manufactured in and after 2013 | 33.19–40.57 lbf⋅ft |
| On chassis | 103.26–118.01 lbf⋅ft |
| Vehicles manufactured in and after 2013 | 66.38–81.13 lbf⋅ft |
| On chassis | 73.76–88.51 lbf⋅ft |
| On stub axle | 33.19–40.57 lbf⋅ft |
| At the axle support | 103.26–118.01 lbf⋅ft |
| On stub axle | 103.26–118.01 lbf⋅ft |
| Vehicles manufactured in and after 2013 | 132.76–162.26 lbf⋅ft |
| Vehicles manufactured in and after 2013 | 177.01–199.14 lbf⋅ft |
| Replace and caulk the nut. | |
| Rear axle longitudinal control arm | 103.26–118.01 lbf⋅ft |
| Vehicles manufactured in and after 2013 | 33.19–40.57 lbf⋅ft |
| Vehicles manufactured in and after 2013 | 73.76–88.51 lbf⋅ft |
| Vehicles manufactured in and after 2013 | 73.76–88.51 lbf⋅ft |
| Stabilizer of rear axle on axle | 25.81–33.19 lbf⋅ft |
| At the axle support | 73.76–88.51 lbf⋅ft |
| On stub axle | 103.26–118.01 lbf⋅ft |
| Wheel bearing unit | 59–66.38 lbf⋅ft |
| Vehicles manufactured in and after 2013 | 177.01–199.14 lbf⋅ft |
| Replace and caulk the nut. | |
| Tire pressure sensors | 2.95 lbf⋅ft |
| Wheel attachment | 66.38–88.51 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2017 Kia Sorento user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Kia warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- All-wheel Drive Clutch Oil Capacity
- Automatic Transmission Fluid Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Clutch Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Gearbox Oil Capacity
- Manual Transmission Oil Capacity
- Steering Fluid Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Kia Sorento service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2017 Kia Sorento you're not only saving money, but also also improving your technical skills and learning something new.
2017 Kia Sorento generations
In 2017 Kia offered 3 generations of the Sorento. Rear suspension fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.