2014 Kia Sorento Second generation facelift Front Suspension Fastener Tightening Specifications
in your garage to make future searches easy.
| Condition | Value |
|---|
| Bleed valve | 7.38 lbf⋅ft |
| Banjo screws | 18.44–22.13 lbf⋅ft |
| Brake line | 11.06 lbf⋅ft |
| Front axle brake caliper | 16.23–22.13 lbf⋅ft |
| Front axle brake caliper mounting support | 59–73.76 lbf⋅ft |
| Front axle brake disc | 4.43 lbf⋅ft |
| Wheel speed sensor | 7.38 lbf⋅ft |
| Vehicles manufactured in and after 2013 | 25.81 lbf⋅ft |
| At the subframe | 66.38–81.13 lbf⋅ft |
| Vehicles manufactured in and after 2013 | 18.44–22.13 lbf⋅ft |
| Track rod end on track rod | 36.88–40.57 lbf⋅ft |
| Shock-absorber piston rod | 44.25–51.63 lbf⋅ft |
| Nuts must be replaced. | |
| On chassis | 33.19–44.25 lbf⋅ft |
| On stub axle | 103.26–118.01 lbf⋅ft |
| Vehicles manufactured in and after 2013 | 177.01–199.14 lbf⋅ft |
| Replace and caulk the nut. | |
| Stabiliser mounting at suspension strut | 73.76–88.51 lbf⋅ft |
| Stabiliser mounting at the stabiliser | 73.76–88.51 lbf⋅ft |
| Stabilizer mounting at the subframe | 36.88–47.94 lbf⋅ft |
| Stabilizer of front axle on axle | 36.88–47.94 lbf⋅ft |
| Support joint at the stub axle | 73.76–88.51 lbf⋅ft |
| Locking pins must be replaced. | |
| Front | 103.26–118.01 lbf⋅ft |
| Rear | 88.51–103.26 lbf⋅ft |
| Vehicles manufactured in and after 2013 | 177.01–199.14 lbf⋅ft |
| Replace and caulk the nut. | |
| Wheel bearing unit | 59–88.51 lbf⋅ft |
| Tire pressure sensors | 2.95 lbf⋅ft |
| Wheel attachment | 66.38–88.51 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2014 Kia Sorento user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Kia warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- All-wheel Drive Clutch Oil Capacity
- Automatic Transmission Fluid Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Clutch Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Gearbox Oil Capacity
- Manual Transmission Oil Capacity
- Steering Fluid Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Kia Sorento service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2014 Kia Sorento you're not only saving money, but also also improving your technical skills and learning something new.
2014 Kia Sorento generations
In 2014 Kia offered 2 generations of the Sorento. Front suspension fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.