2003 Kia Rio Sedan First generation facelift Brake System Specifications
in your garage to make future searches easy.
Condition | Value |
---|
Front axle brake disc thickness | 0.87 in |
Front axle brake disc thickness wear limit | 0.79 in |
Maximum lateral run-out of front axle brake disc | 0.0031 in |
Rear axle brake drum diameter | 7.87 in |
Rear axle brake drum diameter wear limit | 7.93 in |
Brake system is the most important system in your 2003 Rio Sedan. Check pads and disks from time to time and replace them as they worn below minimum thickness allowed by Kia.
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2003 Kia Rio Sedan user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Kia warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Emission
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Kia Rio Sedan service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2003 Kia Rio Sedan you're not only saving money, but also also improving your technical skills and learning something new.