2015 Kia Ceed SW Second generation facelift Front Suspension Fastener Tightening Specifications
For 2015 Ceed SW Second generation facelift Kia recommends to use: and genuine OEM consumables with a part number: 495513X000. To select the right part or fluid see the table below.
in your garage to make future searches easy.
Condition | Value |
---|
Bleed valve | 7.38 lbf⋅ft |
Brake hose | 18.44–22.13 lbf⋅ft |
Brake line | 11.06 lbf⋅ft |
Front axle brake caliper | 16.23–23.6 lbf⋅ft |
Front axle brake caliper mounting support | 59–73.76 lbf⋅ft |
Front axle brake disc | 4.43 lbf⋅ft |
Wheel speed sensor | 7.38 lbf⋅ft |
Lower steering column joint | 23.6–28.03 lbf⋅ft |
Steering gear | 44.25–59 lbf⋅ft |
Steering gear heat protection plate | 7.38 lbf⋅ft |
Track rod end on stub axle | 18.44–22.13 lbf⋅ft |
Locking pins must be replaced. | |
Track rod end on track rod | 36.88–40.57 lbf⋅ft |
Shock-absorber piston rod | 44.25–51.63 lbf⋅ft |
Nuts must be replaced. |
On chassis | 33.19–44.25 lbf⋅ft |
On stub axle | 103.26–118.01 lbf⋅ft |
Central nuts | 206.52–221.27 lbf⋅ft |
Replace and caulk the nut. | Part number: 495513X000 |
Stabiliser mounting at suspension strut | 73.76–88.51 lbf⋅ft |
Stabiliser mounting at the stabiliser | 73.76–88.51 lbf⋅ft |
Stabilizer mounting at the subframe | 33.19–40.57 lbf⋅ft |
Support joint at the stub axle | 73.76–88.51 lbf⋅ft |
Support joint at the transverse control arm | 59–66.38 lbf⋅ft |
Front | 73.76–88.51 lbf⋅ft |
Rear | 118.01–132.76 lbf⋅ft |
Wheel bearing unit | 59–73.76 lbf⋅ft |
Tire pressure sensors | 5.9 lbf⋅ft |
Wheel attachment | 66.38–81.13 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2015 Kia Ceed SW user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Kia warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Kia Ceed SW service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2015 Kia Ceed SW you're not only saving money, but also also improving your technical skills and learning something new.
2015 Kia Ceed SW generations
In 2015 Kia offered 2 generations of the Ceed SW. Front suspension fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.