2011 Jeep Wrangler Third generation Transmission Fastener Tightening Specifications
in your garage to make future searches easy.
| Condition | Value |
|---|
| At the gearbox | 14.75 lbf⋅ft |
| On front axle | 81.13 lbf⋅ft |
| On rear axle | 14.75 lbf⋅ft |
| Jeep diesel straight-4 2.8 L ENS 174 HP | 22.86 lbf⋅ft |
| Jeep gasoline V6 3.8 L EGT 196 HP | 36.88 lbf⋅ft |
| Jeep gasoline V6 3.6 L ERB 280 HP | 24.34 lbf⋅ft |
| Clutch slave cylinder | 16.96 lbf⋅ft |
| Front | 25.08 lbf⋅ft |
| Oil filler screws. | |
| 3.6 V6 with gasoline V6 3.6 L 280 HP engine (2011.10–) | 25.08 lbf⋅ft |
| 3.6 V6 with gasoline V6 3.6 L 280 HP engine (2011.10–) | 25.08 lbf⋅ft |
| 3.6 V6 with gasoline V6 3.6 L 280 HP engine (2011.10–) | 25.08 lbf⋅ft |
| 3.6 V6 with gasoline V6 3.6 L 280 HP engine (2011.10–) | 25.08 lbf⋅ft |
| Top screws | 30.24 lbf⋅ft |
| Bottom | 39.83 lbf⋅ft |
| Lateral-fitting | 50.15 lbf⋅ft |
| Top screws | 29.5 lbf⋅ft |
| Bottom | 39.83 lbf⋅ft |
| Lateral-fitting | 50.15 lbf⋅ft |
| With automatic gearbox | 95.15 lbf⋅ft |
| Top | 29.5 lbf⋅ft |
| Bottom | 39.83 lbf⋅ft |
| Lateral-fitting | 50.15 lbf⋅ft |
| Automatic gearbox NAG1 | 28.76 lbf⋅ft |
| Lower mounting | 39.83 lbf⋅ft |
| Upper fastening | 29.5 lbf⋅ft |
| Lateral-fitting screw | 50.15 lbf⋅ft |
| Jeep diesel straight-4 2.8 L ENS 174 HP | 22.86 lbf⋅ft |
| Jeep gasoline V6 3.8 L EGT 196 HP | 64.91 lbf⋅ft |
| M8 | 30.98 lbf⋅ft |
| Distributor gearbox oil drain plug | 14.75–25.08 lbf⋅ft |
| Distributor gearbox oil filler screws | 14.75–25.08 lbf⋅ft |
| With manual transmission | 22.13 lbf⋅ft |
| NSG370 gearbox | 22.13 lbf⋅ft |
| With automatic gearbox | 5.9 lbf⋅ft |
| With manual transmission | 22.13 lbf⋅ft |
| NSG370 gearbox | 22.13 lbf⋅ft |
| Gearbox oil filter cover | 3.69 lbf⋅ft |
| Gearbox oil sump | 14.75 lbf⋅ft |
| 3.6 V6 with gasoline V6 3.6 L 280 HP engine (2011.10–) | 34.67 lbf⋅ft |
| 3.6 V6 with gasoline V6 3.6 L 280 HP engine (2011.10–) | 34.67 lbf⋅ft |
| Transfer box onto transmission flange connection | 25.81 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2011 Jeep Wrangler user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Jeep warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Gearbox Oil Capacity
- Manual Transmission Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Jeep Wrangler service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2011 Jeep Wrangler you're not only saving money, but also also improving your technical skills and learning something new.