For 2010 Grand Cherokee Third generation Jeep recommends to use: ACEA A3, MB 229.31, and MS-6395 engine oils. To select the right engine oil see the table below.

How much engine oil you need to put into 2010 Grand Cherokee depends on.

in your garage to make future searches easy.

Condition Volume
3.0 CRD 4x4 with diesel V6 3.0 L 208 HP engine (2006.5–2010.12) 10.04 US qt.
Engine oil: ACEA A3
3.0 CRD 4x4 with diesel V6 3.0 L 215 HP engine (2005.6–2010.12) 10.04 US qt.
Engine oil: MB 229.31
3.7 V6 4x4 with gasoline V6 3.7 L 198 HP engine (2008.1–2010.12) 4.97 US qt.
Engine oil: ACEA A3
3.7 V6 4x4 with gasoline V6 3.7 L 211 HP engine (2005.6–2010.12) 4.97 US qt.
Engine oil: ACEA A3
4.7 V8 4x4 with gasoline V8 4.7 L 228 HP engine (2005.6–2010.12) 5.92 US qt.
Engine oil: ACEA A3
4.7 V8 4x4 with gasoline V8 4.7 L 299 HP engine (2007.9–2010.2) 5.92 US qt.
Engine oil: MS-6395
4.7 V8 4x4 with gasoline V8 4.7 L 299 HP engine (2007.9–2010.2) 5.92 US qt.
Engine oil: MS-6395
5.7 V8 4x4 with gasoline V8 5.7 L 322 HP engine (2005.6–2010.12) 6.97 US qt.
Engine oil: ACEA A3
5.7 V8 4x4 with gasoline V8 5.7 L 347 HP engine (2009.1–2010.12) 6.97 US qt.
Engine oil: MS-6395
5.7 V8 4x4 with gasoline V8 5.7 L 347 HP engine (2009.1–2010.12) 6.97 US qt.
Engine oil: MS-6395
6.1 SRT8 4x4 with gasoline V8 6.1 L 420 HP engine (2006.3–2010.12) 6.97 US qt.
Engine oil: ACEA A3

Replacing engine oil in your 2010 Jeep Grand Cherokee is quite an easy task. It's a bit dirty, but everyone can handle it. It will take about 3060 minutes depends on your skill level and might save you $10$30 depends on the region you live in.

First unscrew the refill cap on the top of the engine. Use a ratchet with the correct size head to unscrew the drain plug on the engine oil pan located on the bottom side of the engine, and drain old oil. You might need to unscrew a few more screws to remove protection covers underneath your car to get access to the oil pan and the oil filter. Then using an oil filter wrench unscrew the old oil filter. Then lubricate a new filter rubber gasket with clean engine oil and install the new filter. Install a new drain plug, and with help of a funnel refill the engine with new engine oil.

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2010 Jeep Grand Cherokee user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Jeep warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Jeep Grand Cherokee service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2010 Jeep Grand Cherokee you're not only saving money, but also also improving your technical skills and learning something new.

2010 Jeep Grand Cherokee generations

In 2010 Jeep offered 2 generations of the Grand Cherokee. Engine oil capacity may vary in different generations. Be sure that you are looking at the rigt modification.

Jeep Grand Cherokee Third generation model years

Units:
facebook twitter reddit linkedin1 messenger whatsapp1 telegram skype email chat