2015 Jeep Grand Cherokee front suspension fastener tightening specifications

in your garage to make future searches easy.

Condition	Value

expand_moreFront axle brake


Bleed valve	11.8 lbf⋅ft11.8 lbf⋅ft16 N⋅m

expand_moreBrake hose

expand_moreJeep gasoline V6 3.6 L ERB 282 HP


At the brake line	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m
Banjo screws	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace sealing rings.


All other modifications	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m


Brake line	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m
Front axle brake caliper	40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m
Front axle brake caliper mounting support	147.51 lbf⋅ft147.51 lbf⋅ft200 N⋅m
Wheel speed sensor	8.11 lbf⋅ft8.11 lbf⋅ft11 N⋅m

expand_moreFront axle steering

expand_moreSteering gear


On frame	189.55 lbf⋅ft189.55 lbf⋅ft257 N⋅m


Track rod end on stub axle	46.47 lbf⋅ft46.47 lbf⋅ft63 N⋅m

expand_moreTrack rod end on track rod


Lock nuts	68.59 lbf⋅ft68.59 lbf⋅ft93 N⋅m


Track rod on steering gear	79.66 lbf⋅ft79.66 lbf⋅ft108 N⋅m

expand_moreFront axle suspension

expand_moreSuspension strut


Bottom	173.33 lbf⋅ft173.33 lbf⋅ft235 N⋅m
Top	20.65 lbf⋅ft20.65 lbf⋅ft28 N⋅m

expand_moreWheel suspension


Front axle drive shaft	228.64 lbf⋅ft228.64 lbf⋅ft310 N⋅m
Stabiliser mounting at the stabiliser	89.98 lbf⋅ft89.98 lbf⋅ft122 N⋅m
Stabiliser mounting at the stub axle	89.98 lbf⋅ft89.98 lbf⋅ft122 N⋅m

expand_moreSupport joint at the transverse control arm

expand_moreAt the transverse control arm


Bottom	88.51 lbf⋅ft88.51 lbf⋅ft120 N⋅m
Top	70.07 lbf⋅ft70.07 lbf⋅ft95 N⋅m

expand_moreUpper transverse control arm

expand_moreOn chassis subframe


Inside	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m


On stub axle	70.07 lbf⋅ft70.07 lbf⋅ft95 N⋅m

expand_moreLower rear transverse control arm


At the axle support	151.2 lbf⋅ft151.2 lbf⋅ft205 N⋅m
Important! Do not tighten the transverse control arm screws until the vehicle is on the ground.
On chassis subframe	142.35 lbf⋅ft142.35 lbf⋅ft193 N⋅m

expand_moreUpper front transverse control arm


At the axle support	81.13 lbf⋅ft81.13 lbf⋅ft110 N⋅m
On chassis subframe	68.59 lbf⋅ft68.59 lbf⋅ft93 N⋅m

expand_moreWheels and tires


Tire pressure sensors	1.03 lbf⋅ft1.03 lbf⋅ft1.4 N⋅m
Wheel attachment	85.56–115.06 lbf⋅ft85.56–115.06 lbf⋅ft116–156 N⋅m

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2015 Jeep Grand Cherokee user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Jeep warranty policy for your region. In some regions DIY service may invalidate your warranty.

Maintenance Items

Chassis and Body Fastener Tightening Specifications
Engine Fastener Tightening Specifications
Front Suspension Fastener Tightening Specifications
Rear Suspension Fastener Tightening Specifications
Transmission Fastener Tightening Specifications

Service Intervals

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Jeep Grand Cherokee service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2015 Jeep Grand Cherokee you're not only saving money, but also also improving your technical skills and learning something new.

2015 Jeep Grand Cherokee Fourth generation first facelift Front Suspension Fastener Tightening Specifications

Table of Contents

Conquer your fears and never give up!

Jeep Grand Cherokee Fourth generation first facelift model years

Suggest edit