2010 Hyundai Tucson First generation Engine Oil Capacity
For 2010 Tucson First generation Hyundai recommends to use: API SJ, API SL, ACEA A3/B3, ACEA A3/B4, ACEA C3, and API SM engine oils. To select the right engine oil see the table below.
How much engine oil you need to put into 2010 Tucson depends on the engine installed, and some other conditions listed below.
in your garage to make future searches easy.
Condition | Volume |
---|
Hyundai gasoline straight-4 2.0 Liters G4GC 141 HP | 4.23 US qt. |
Engine oil: API SJ, API SL | |
Hyundai gasoline V6 2.7 Liters G6BA-G 173 HP | 4.76 US qt. |
Engine oil: ACEA A3/B3 | |
All other modifications | 6.23 US qt. |
Engine oil: ACEA A3/B4, ACEA C3 |
Replacing engine oil in your 2010 Hyundai Tucson is quite an easy task. It's a bit dirty, but everyone can handle it. It will take about 30–60 minutes depends on your skill level and might save you $10–$30 depends on the region you live in.
First unscrew the refill cap on the top of the engine. Use a ratchet with the correct size head to unscrew the drain plug on the engine oil pan located on the bottom side of the engine, and drain old oil. You might need to unscrew a few more screws to remove protection covers underneath your car to get access to the oil pan and the oil filter. Then using an oil filter wrench unscrew the old oil filter. Then lubricate a new filter rubber gasket with clean engine oil and install the new filter. Install a new drain plug, and with help of a funnel refill the engine with new engine oil.
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2010 Hyundai Tucson user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Hyundai warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Clutch Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Gearbox Oil Capacity
- Manual Transmission Oil Capacity
- Steering Fluid Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Drive Belts Specifications
- Electrical System Specifications
- Emission
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Hyundai Tucson service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2010 Hyundai Tucson you're not only saving money, but also also improving your technical skills and learning something new.
2010 Hyundai Tucson generations
In 2010 Hyundai offered 2 generations of the Tucson. Engine oil capacity may vary in different generations. Be sure that you are looking at the rigt modification.