For 2007 Santa Fe Second generation Hyundai recommends to use: SAE 75W-90, API GL-5, and SAE 80W-90 transmission oils. To select the right transmission oil see the table below.
How much transmission oil you need to put into 2007 Santa Fe depends on conditions listed below.
in your garage to make future searches easy.
Condition
Volume
2.2 CRDi 4x4 with diesel straight-4 2.2 L 153 HP engine (2006.3–)
Gearbox oil replacement might take 30–60 minutes, and will save you $30–$50 depends on the region you live in.
To replace oil in gearbox onin 2007 Hyundai Santa Fe first locate refill and drain plugs on the gearbox body. Unscrew the refill plug first and then the drain plug. Use a spanner or a retched with the correct size head to do the job. When all oil came out screw the drain plug back with a new gasket. Refill the gearbox with new oil and screw the refill plug back.
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2007 Hyundai Santa Fe user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Hyundai warranty policy for your region. In some regions DIY service may invalidate your warranty.
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Hyundai Santa Fe service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2007 Hyundai Santa Fe you're not only saving money, but also also improving your technical skills and learning something new.