2012 Hyundai H-300 Box Van Second generation Engine Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
Intake manifold | 11.06–14.75 lbf⋅ft |
Air-conditioning compressor | 14.75–22.13 lbf⋅ft |
Air-conditioning compressor pressure line | 4.43 lbf⋅ft |
Alternator | 29.5–44.25 lbf⋅ft |
Hydraulic lines banjo screws at servo-steering pump | 40.57–47.94 lbf⋅ft |
Power steering pump bracket | 14.75–22.13 lbf⋅ft |
Long screws | 14.75–22.13 lbf⋅ft |
Short screws | 18.44–25.81 lbf⋅ft |
Vacuum pump | 7.38–8.85 lbf⋅ft |
Fuel-distributing pipe | 11.06–14.75 lbf⋅ft |
High-pressure pump | 11.06–14.75 lbf⋅ft |
High-pressure pump pulley | 47.94–55.32 lbf⋅ft |
Injection hoses | 17.7–20.65 lbf⋅ft |
Injection lines must be replaced. | |
Injection nozzle (injector) | 22.13 lbf⋅ft |
At the bracket | 11.06–14.75 lbf⋅ft |
On the engine block | 14.75–22.13 lbf⋅ft |
Turbo charger | 36.88–51.63 lbf⋅ft |
Coolant pump | 14.75–22.13 lbf⋅ft |
Coolant pump pulley | 7.38–8.85 lbf⋅ft |
Fan wheel | 7.38–8.85 lbf⋅ft |
Camshaft bearing | 11.06 lbf⋅ft |
First stage | 36.14 lbf⋅ft |
Screws must be replaced. See figure 1. | |
Second stage | 120° |
Third stage | 90° |
Valve cover | 7.38–8.85 lbf⋅ft |
Left nuts | 36.88–44.25 lbf⋅ft |
Left screws | 25.81–33.19 lbf⋅ft |
Right screws | 25.81 lbf⋅ft |
First stage | 43.52 lbf⋅ft |
Screws and nuts must be replaced. | |
Second stage | slacken |
Third stage | 23.6–26.55 lbf⋅ft |
Fourth stage | 60–64° |
Crankshaft central screws | 206.52–221.27 lbf⋅ft |
Hyundai diesel straight-4 2.5 Liters D4CB 168 HP | 95.88–103.26 lbf⋅ft |
Screws must be replaced. | |
All other modifications | 95.88–103.26 lbf⋅ft |
Main bearing | 95.88–103.26 lbf⋅ft |
M6 | 7.38–8.85 lbf⋅ft |
M8 | 14.75–22.13 lbf⋅ft |
Camshaft timing chain guide rail | 7.38–8.85 lbf⋅ft |
Camshaft timing chain tensioner | 7.38–8.85 lbf⋅ft |
Camshaft timing chain tensioning rail | 14.75–22.13 lbf⋅ft |
Camshaft timing gear | 70.07–88.51 lbf⋅ft |
Top screws | 7.38–8.85 lbf⋅ft |
Bottom screws | 14.75–22.13 lbf⋅ft |
Oil pump | 7.38–8.85 lbf⋅ft |
High-pressure pump timing chain | 14.75–22.13 lbf⋅ft |
Oil pump | 7.38–8.85 lbf⋅ft |
High-pressure pump timing chain | 14.75–22.13 lbf⋅ft |
Heat-exchanger on oil filter housing | 13.28–18.44 lbf⋅ft |
Oil drain plug | 25.81–33.19 lbf⋅ft |
Oil filter | 16.23–18.44 lbf⋅ft |
On the engine block | 14.75–18.44 lbf⋅ft |
M8 | 14.75–18.44 lbf⋅ft |
M10 | 33.19–40.57 lbf⋅ft |
M6 | 5.9–8.85 lbf⋅ft |
M8 | 14.75–22.13 lbf⋅ft |
Oil sump lower part | 7.38–8.85 lbf⋅ft |
Camshaft sensor | 7.38 lbf⋅ft |
Crankshaft sensor | 7.38 lbf⋅ft |
Glow plugs | 11.06–14.75 lbf⋅ft |
Lambda sensor | 29.5–36.88 lbf⋅ft |
On engine bracket | 51.63–66.38 lbf⋅ft |
On chassis | 118.01–132.76 lbf⋅ft |
On engine mounting | 51.63–66.38 lbf⋅ft |
Exhaust manifold | 22.13 lbf⋅ft |
Exhaust pipe | 29.5–44.25 lbf⋅ft |
Starter | 36.88–47.94 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2012 Hyundai H-300 Box Van user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Hyundai warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Clutch Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Hyundai H-300 Box Van service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2012 Hyundai H-300 Box Van you're not only saving money, but also also improving your technical skills and learning something new.