in your garage to make future searches easy.

Condition Value
expand_moreFront axle brake
Bleed valve 5.9 lbf⋅ft
expand_moreBrake hose
At the brake caliper 18.4422.13 lbf⋅ft
Brake line 11.06 lbf⋅ft
Front axle brake caliper 16.2323.6 lbf⋅ft
Front axle brake caliper mounting support 5973.76 lbf⋅ft
expand_moreFront axle brake disc
Wheel hub on brake disc 36.8844.25 lbf⋅ft
expand_moreFront axle steering
Track rod end on stub axle 25.8133.19 lbf⋅ft
expand_moreFront axle suspension
expand_moreShock absorber
At the bearing pedestal 8.8513.28 lbf⋅ft
At the transverse control arm 51.6370.07 lbf⋅ft
Bearing pedestal on chassis 51.6370.07 lbf⋅ft
expand_moreTorsion rod
At the transverse control arm 51.6370.07 lbf⋅ft
expand_moreWheel suspension
Front axle stabiliser mounting 51.6370.07 lbf⋅ft
expand_moreLower front transverse control arm
On chassis subframe 118.01132.76 lbf⋅ft
expand_moreLower rear transverse control arm
expand_moreAt the transverse control arm
Front 81.1395.88 lbf⋅ft
On chassis 103.26140.14 lbf⋅ft
Stabiliser mounting at the axle control arm 73.7688.51 lbf⋅ft
Stabiliser mounting at the stabiliser 73.7688.51 lbf⋅ft
expand_moreSupport joint at the stub axle
expand_moreOn stub axle
Top 88.51132.76 lbf⋅ft
Bottom 88.51132.76 lbf⋅ft
expand_moreSupport joint at the transverse control arm
expand_more2.5 D with diesel straight-4 2.5 L 76 HP at 4000 RPM, 208 N⋅m at 1800 RPM engine (1997.10–2004.4)
expand_moreAt the transverse control arm
Top 25.8140.57 lbf⋅ft
Bottom 81.1395.88 lbf⋅ft
expand_moreAll other modifications
expand_moreAt the transverse control arm
Top 25.8140.57 lbf⋅ft
Bottom 62.6981.13 lbf⋅ft
expand_moreTrack control arm lower
expand_moreOn chassis subframe
Front 88.51118.01 lbf⋅ft
Rear 132.76177.01 lbf⋅ft
expand_moreUpper transverse control arm
On chassis 88.51118.01 lbf⋅ft
expand_moreWheel hub wheel bearing
expand_more2.5 D with diesel straight-4 2.5 L 76 HP at 4000 RPM, 208 N⋅m at 1800 RPM engine (1997.10–2004.4)
expand_moreCentral nuts
First stage 22.13 lbf⋅ft
Locking pins must be replaced.
Second stage slacken
Third stage 13.28 lbf⋅ft
expand_moreAll other modifications
expand_moreCentral nuts
First stage 11.06 lbf⋅ft
Second stage slacken
Third stage 18.44 lbf⋅ft
Flange on wheel hub 36.8844.25 lbf⋅ft
expand_moreWheels and tires
expand_moreWheel attachment
2.5 D with diesel straight-4 2.5 L 76 HP at 4000 RPM, 208 N⋅m at 1800 RPM engine (1997.10–2004.4) 110.63147.51 lbf⋅ft
All other modifications 88.51103.26 lbf⋅ft

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2000 Hyundai H-200 Van user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Hyundai warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Hyundai H-200 Van service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2000 Hyundai H-200 Van you're not only saving money, but also also improving your technical skills and learning something new.

Units:
facebook twitter reddit linkedin messenger whatsapp telegram skype email chat