1997 Hyundai H-1 Van First generation Front Suspension Fastener Tightening Specifications
in your garage to make future searches easy.
| Condition | Value |
|---|
| Bleed valve | 5.9 lbf⋅ft |
| At the brake caliper | 18.44–22.13 lbf⋅ft |
| Brake line | 11.06 lbf⋅ft |
| Front axle brake caliper | 16.23–23.6 lbf⋅ft |
| Front axle brake caliper mounting support | 59–73.76 lbf⋅ft |
| Wheel hub on brake disc | 36.88–44.25 lbf⋅ft |
| Track rod end on stub axle | 25.81–33.19 lbf⋅ft |
| At the bearing pedestal | 8.85–13.28 lbf⋅ft |
| At the transverse control arm | 51.63–70.07 lbf⋅ft |
| Bearing pedestal on chassis | 51.63–70.07 lbf⋅ft |
| At the transverse control arm | 51.63–70.07 lbf⋅ft |
| Front axle stabiliser mounting | 51.63–70.07 lbf⋅ft |
| On chassis subframe | 118.01–132.76 lbf⋅ft |
| Front | 81.13–95.88 lbf⋅ft |
| On chassis | 103.26–140.14 lbf⋅ft |
| Stabiliser mounting at the axle control arm | 73.76–88.51 lbf⋅ft |
| Stabiliser mounting at the stabiliser | 73.76–88.51 lbf⋅ft |
| Top | 88.51–132.76 lbf⋅ft |
| Bottom | 88.51–132.76 lbf⋅ft |
| Top | 25.81–40.57 lbf⋅ft |
| Bottom | 81.13–95.88 lbf⋅ft |
| Top | 25.81–40.57 lbf⋅ft |
| Bottom | 62.69–81.13 lbf⋅ft |
| Front | 88.51–118.01 lbf⋅ft |
| Rear | 132.76–177.01 lbf⋅ft |
| On chassis | 88.51–118.01 lbf⋅ft |
| First stage | 22.13 lbf⋅ft |
| Locking pins must be replaced. | |
| Second stage | slacken |
| Third stage | 13.28 lbf⋅ft |
| First stage | 11.06 lbf⋅ft |
| Second stage | slacken |
| Third stage | 18.44 lbf⋅ft |
| Flange on wheel hub | 36.88–44.25 lbf⋅ft |
| 2.5 D with diesel straight-4 2.5 L 76 HP at 4000 RPM, 208 N⋅m at 1800 RPM engine (1997.10–2004.4) | 110.63–147.51 lbf⋅ft |
| All other modifications | 88.51–103.26 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 1997 Hyundai H-1 Van user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Hyundai warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Clutch Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Gearbox Oil Capacity
- Manual Transmission Oil Capacity
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Hyundai H-1 Van service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 1997 Hyundai H-1 Van you're not only saving money, but also also improving your technical skills and learning something new.