2008 Hyundai Brio Hatchback Third generation Engine Fastener Tightening Specifications
in your garage to make future searches easy.
| Condition | Value |
|---|
| Intake manifold | 10.33–14.75 lbf⋅ft |
| Coolant pump | 8.85 lbf⋅ft |
| Coolant pump pulley | 7.38 lbf⋅ft |
| Camshaft bearing | 8.85 lbf⋅ft |
| First stage | 21.39 lbf⋅ft |
| See figure 1. | |
| Second stage | 90° |
| Third stage | slacken |
| Fourth stage | 21.39 lbf⋅ft |
| Fifth stage | 90° |
| First stage | 25.08 lbf⋅ft |
| See figure 1. | |
| Second stage | 90° |
| Third stage | slacken |
| Fourth stage | 25.08 lbf⋅ft |
| Fifth stage | 90° |
| Valve cover | 5.9–7.38 lbf⋅ft |
| Connecting rod bearing | 23.6 lbf⋅ft |
| Crankshaft central screws | 103.26–110.63 lbf⋅ft |
| Main bearing | 40.57–44.25 lbf⋅ft |
| Camshaft timing gear | 59–73.76 lbf⋅ft |
| Drive belt tensioner device | 14.75–22.13 lbf⋅ft |
| Toothed belt guard | 5.9–7.38 lbf⋅ft |
| Toothed belt tensioning roller | 14.75–18.44 lbf⋅ft |
| Oil drain plug | 29.5–33.19 lbf⋅ft |
| Oil sump | 7.38–8.85 lbf⋅ft |
| Knock sensor | 11.8–19.18 lbf⋅ft |
| Lambda sensor | 36.88–44.25 lbf⋅ft |
| Nuts on chassis | 51.63–66.38 lbf⋅ft |
| Nuts on engine bracket | 36.88–47.94 lbf⋅ft |
| Screws on engine bracket | 36.88–47.94 lbf⋅ft |
| Heat shields | 11.8–16.23 lbf⋅ft |
| Otherwise | 22.13–25.81 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2008 Hyundai Brio Hatchback user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Hyundai warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Brake Fluid Capacity
- Clutch Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Steering Fluid Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Hyundai Brio Hatchback service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2008 Hyundai Brio Hatchback you're not only saving money, but also also improving your technical skills and learning something new.