in your garage to make future searches easy.

Condition Value
expand_moreAir intake system
Intake manifold 11.0614.75 lbf⋅ft
Sealing rings must be replaced.
expand_moreAuxiliary assemblies
Alternator 14.7518.44 lbf⋅ft
expand_moreCooling system
Coolant pump 8.8511.06 lbf⋅ft
Coolant pump pulley 5.97.38 lbf⋅ft
expand_moreCylinder head
expand_moreCamshaft bearing
All other modifications 14.75 lbf⋅ft
expand_moreCylinder head screws
expand_moreAll other modifications
Figure 1. Cylinder head, Cylinder head screws, All other modifications.
Figure 1. Cylinder head, Cylinder head screws, All other modifications.
First stage 18.44 lbf⋅ft
Screws must be replaced. See figure 1.
Second stage 60°
Third stage 60°
Rocker bridge 14.7522.13 lbf⋅ft
Valve cover 5.97.38 lbf⋅ft
Valve cover locking screws 3.695.9 lbf⋅ft
expand_moreEngine block
expand_moreConnecting rod bearing
All other modifications 23.625.81 lbf⋅ft
Screws must be replaced.
Crankcase ventilation 5.98.85 lbf⋅ft
expand_moreCrankshaft central screws
All other modifications 103.26110.63 lbf⋅ft
Screws must be replaced.
expand_moreCrankshaft pulley
All other modifications 29.533.19 lbf⋅ft
expand_moreFlywheel
All other modifications 103.26110.63 lbf⋅ft
expand_moreMain bearing
All other modifications 40.5744.25 lbf⋅ft
Screws must be replaced.
expand_moreEngine control
expand_moreCamshaft timing gear
All other modifications 5973.76 lbf⋅ft
Drive belt tensioner device 14.7522.13 lbf⋅ft
expand_moreToothed belt guard
All other modifications 7.388.85 lbf⋅ft
expand_moreEngine lubrication
expand_moreOil drain plug
All other modifications 25.8133.19 lbf⋅ft
Sealing rings must be replaced.
expand_moreOil filter housing
All other modifications 8.8511.8 lbf⋅ft
Lubricate the sealing ring.
expand_moreOil pump
All other modifications 8.8511.06 lbf⋅ft
expand_moreOil sump
All other modifications 4.435.9 lbf⋅ft
Sealing rings must be replaced.
expand_moreEngine management
Crankshaft sensor 7.38 lbf⋅ft
Knock sensor 14.75 lbf⋅ft
Lambda sensor 36.8844.25 lbf⋅ft
expand_moreEngine mounting
Engine bracket 22.1329.5 lbf⋅ft
expand_moreEngine mounting
expand_moreAll other modifications
On chassis 66.3881.13 lbf⋅ft
On engine bracket 36.8847.94 lbf⋅ft
expand_moreExhaust system
expand_moreExhaust manifold
All other modifications 11.0614.75 lbf⋅ft
expand_moreIgnition system
expand_moreSpark plugs
All other modifications 14.7522.13 lbf⋅ft
expand_moreStart system
Starter 18.4425.81 lbf⋅ft

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 1999 Hyundai Accent Hatchback user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Hyundai warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Hyundai Accent Hatchback service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 1999 Hyundai Accent Hatchback you're not only saving money, but also also improving your technical skills and learning something new.

1999 Hyundai Accent Hatchback generations

In 1999 Hyundai offered 2 generations of the Accent Hatchback. Engine fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.

Hyundai Accent Hatchback Second generation model years

Units:
facebook twitter reddit linkedin messenger whatsapp telegram skype email chat