GMC gasoline V6 90° Generation I 4.3L (262 CID) Vortec 4300 V6 LU3 (2004–2014) engine DIY maintenance and service manual

General Information

GMC gasoline V6 90° Generation I 4.3L (262 CID) Vortec 4300 V6 LU3 (2004–2014) is an 262 in³ (4.29 L) internal combustion reciprocating V6 engine. It has bore/stroke ratio of 4.012 in × 3.48 in (10.19 cm × 8.84 cm), and uses 9.2:1 compression. This engine was rated 195 hp (145.41 kW) at 4600 rpm and 260 lbf⋅ft (352.51 N⋅m) of torque at 2800 rpm. It was used in Chevrolet and GMC cars.

Engine Performance Rating

SAE J1349 (SAE Net)

GMC gasoline V6 90° Generation I 4.3L (262 CID) Vortec 4300 V6 LU3 (2004–2014) engine performance rating according to SAE J1349 (SAE Net) standard.
Parameter	Output
Power Rating	195 hp (145.41 kW) at 4600 RPM
Torque Rating	352.51 N⋅m260 lbf⋅ft260 lbf⋅ft at 2800 RPM

Specifications

General

GMC gasoline V6 90° Generation I 4.3L (262 CID) Vortec 4300 V6 LU3 (2004–2014) engine general specifications.
Parameter	Value
Type	Internal Combustion Reciprocating
Fuel Type	Gasoline or Natural Gas (CNG)
Cylinder Configuration	V6
Engine Displacement	4.29 L262 in³262 in³
Bore	10.19 cm4.012 in4.012 in
Stroke	8.84 cm3.48 in3.48 in
Compression Ratio	9.2:1
Firing Order	1-6-5-4-3-2

Photos

Please help our community. Upload your photos of GMC gasoline V6 90° Generation I 4.3L (262 CID) Vortec 4300 V6 LU3 (2004–2014) engine.

Block, crankshaft and pistons

GMC gasoline V6 90° Generation I 4.3L (262 CID) Vortec 4300 V6 LU3 (2004–2014) engine block, crankshaft and pistons specifications.
Parameter	Value
Block Material	Cast iron
Crankshaft Material	Cast nodular iron
Piston Material	Cast alloy aluminum
Connecting Rod Material	Forged steel

Spark Plugs and Wires

GMC gasoline V6 90° Generation I 4.3L (262 CID) Vortec 4300 V6 LU3 (2004–2014) spark plugs and wires specifications.
Parameter	Value
Spark Plugs	R41-932
Spark Plug Gap	1.52 mm0.06 in0.06 in
Wires Resistance (nominal)	1000 ohms per foot

Engine head and valvetrain

GMC gasoline V6 90° Generation I 4.3L (262 CID) Vortec 4300 V6 LU3 (2004–2014) engine head and valvetrain specifications.
Parameter	Value
Head Material	Cast iron
Valvetrain Type	OHV
Valves per Cylinder	2
Camshaft Material	Steel

Air Intake

GMC gasoline V6 90° Generation I 4.3L (262 CID) Vortec 4300 V6 LU3 (2004–2014) air intake specifications.
Parameter	Value
Air Intake Method	Naturally Aspirated

Fuel Injection

GMC gasoline V6 90° Generation I 4.3L (262 CID) Vortec 4300 V6 LU3 (2004–2014) fuel injection specifications.
Parameter	Value
Injection Type	Multi Point

Oil Pump

GMC gasoline V6 90° Generation I 4.3L (262 CID) Vortec 4300 V6 LU3 (2004–2014) oil pump specifications.
Parameter	Value
Oil Pump Pressure	1.63 atm.24 Psi24 Psi at 4000 RPM

Water Pump

GMC gasoline V6 90° Generation I 4.3L (262 CID) Vortec 4300 V6 LU3 (2004–2014) water pump specifications.
Parameter	Value
Water Pump	Centrifugal vane impeller type pump

Engine Specifications

Condition	Value

expand_moreGeneral specifications

expand_moreBalance shaft

expand_moreBearing journal diameter


Rear	1.499–1.5 in1.499–1.5 in38.085–38.1 mm

expand_moreBushing bore diameter


Rear	0.002–0.0035 in0.002–0.0035 in0.05–0.088 mm

expand_moreBlock


Crankshaft main bearing bore out-of-round	0.002 in0.002 in0.05 mm
Cylinder bore diameter	4.001–4.002 in4.001–4.002 in101.618–101.643 mm

expand_moreCylinder bore out-of-round


Production	0.00067 in0.00067 in0.017 mm
Service	0.002 in0.002 in0.05 mm

expand_moreCylinder bore taper

expand_moreProduction


Relief Side	0.00098 in0.00098 in0.025 mm
Thrust side	0.00047 in0.00047 in0.012 mm


Service	0.00098 in0.00098 in0.025 mm


Cylinder head deck surface flatness	0.002–0.006 in0.002–0.006 in0.05–0.15 mm

expand_moreCamshaft


Camshaft end play	0.001–0.009 in0.001–0.009 in0.0254–0.2286 mm
Camshaft journal ⌀	1.87–1.87 in1.87–1.87 in47.44–47.49 mm
Camshaft journal out-of-round	0.00098 in0.00098 in0.025 mm

expand_moreCamshaft lobe lift


Exhaust	0.28–0.29 in0.28–0.29 in7.2–7.3 mm
Intake	0.27–0.28 in0.27–0.28 in6.97–7.07 mm


Camshaft runout	0.0026 in0.0026 in0.065 mm

expand_moreConnecting rod

expand_moreConnecting rod bearing clearance


Production	0.0015–0.0031 in0.0015–0.0031 in0.038–0.078 mm
Service	0.00098–0.0025 in0.00098–0.0025 in0.025–0.063 mm


Connecting rod side clearance	0.0059–0.017 in0.0059–0.017 in0.15–0.44 mm

expand_moreCrankshaft


Connecting rod journal diameter	2.249–2.25 in2.249–2.25 in57.116–57.148 mm

expand_moreConnecting rod journal out-of-round


Production	0.00031 in0.00031 in0.008 mm
Service	0.00098 in0.00098 in0.025 mm

expand_moreConnecting rod journal taper


Production	0.00039 in0.00039 in0.01 mm
Service	0.00098 in0.00098 in0.025 mm


Crankshaft end play	0.002–0.0079 in0.002–0.0079 in0.05–0.2 mm

expand_moreCrankshaft main bearing clearance 1


Production	0.00079–0.002 in0.00079–0.002 in0.02–0.05 mm
Service	0.001–0.002 in0.001–0.002 in0.0254–0.05 mm

expand_moreCrankshaft main bearing clearance 2, 3, and 4


Production	0.0011–0.0023 in0.0011–0.0023 in0.028–0.058 mm
Service	0.00098–0.0025 in0.00098–0.0025 in0.025–0.063 mm


Crankshaft main journal diameter 1	2.449–2.449 in2.449–2.449 in62.199–62.217 mm
Crankshaft main journal diameter 2 and 3	2.448–2.449 in2.448–2.449 in62.191–62.215 mm
Crankshaft main journal diameter 4	2.448–2.449 in2.448–2.449 in62.179–62.203 mm

expand_moreCrankshaft main journal out-of-round


Production	0.0002 in0.0002 in0.005 mm
Service	0.00098 in0.00098 in0.025 mm


Crankshaft main journal taper	0.00028 in0.00028 in0.007 mm

expand_moreExhaust manifold

expand_moreSurface flatness


Flange to flange	0.0098 in0.0098 in0.25 mm
Individual flange	0.002 in0.002 in0.05 mm

expand_moreIntake manifold


Surface flatness	0.0039 in0.0039 in0.1 mm

expand_morePiston rings

expand_morePiston ring end gap

expand_moreFirst compression ring


Production	0.0098–0.016 in0.0098–0.016 in0.25–0.4 mm
Service	0.0098–0.02 in0.0098–0.02 in0.25–0.5 mm

expand_moreSecond compression ring


Production	0.015–0.023 in0.015–0.023 in0.38–0.58 mm
Service	0.015–0.031 in0.015–0.031 in0.38–0.8 mm

expand_moreOil control ring


Production	0.0098–0.03 in0.0098–0.03 in0.25–0.76 mm
Service	0.0002–0.0035 in0.0002–0.0035 in0.005–0.09 mm

expand_morePiston ring to groove clearance

expand_moreFirst compression ring


Production	0.0012–0.0028 in0.0012–0.0028 in0.03–0.07 mm
Service	0.0012–0.0033 in0.0012–0.0033 in0.03–0.085 mm

expand_moreSecond compression ring


Production	0.003–0.011 in0.003–0.011 in0.076–0.28 mm
Service	0.0012–0.0033 in0.0012–0.0033 in0.03–0.085 mm

expand_moreOil control ring


Production	0.0018–0.0077 in0.0018–0.0077 in0.046–0.196 mm
Service	0.003–0.0079 in0.003–0.0079 in0.076–0.2 mm

expand_moreMetric english

expand_morePistons and pins

expand_morePiston

expand_morePiston to bore clearance


Production	0.00071–0.0024 in0.00071–0.0024 in0.018–0.061 mm
Service	0.003 in0.003 in0.075 mm

expand_morePin

expand_morePiston pin clearance to connecting rod bore


Press Fit	0.00047–0.0019 in0.00047–0.0019 in0.012–0.048 mm

expand_morePiston pin clearance to piston pin bore


Production	0.00051–0.00091 in0.00051–0.00091 in0.013–0.023 mm
Service	0.00098 in0.00098 in0.025 mm


Piston pin diameter	0.927–0.927 in0.927–0.927 in23.545–23.548 mm

expand_moreValve system

expand_moreValves


Valve face angle	45°45°45°
Valve seat angle	46°46°46°
Valve seat run-out	0.002 in0.002 in0.05 mm

expand_moreValve seat width


Intake	0.04–0.065 in0.04–0.065 in1.016–1.651 mm
Exhaust	0.065–0.098 in0.065–0.098 in1.651–2.489 mm


Valve stem oil seal installed height	0.039–0.079 in0.039–0.079 in1–2 mm

expand_moreValve stem-to-guide clearance

expand_moreIntake


Production	0.00098–0.0027 in0.00098–0.0027 in0.025–0.069 mm
Service	0.00098–0.0037 in0.00098–0.0037 in0.025–0.094 mm

expand_moreExhaust


Production	0.00098–0.0027 in0.00098–0.0027 in0.025–0.069 mm
Service	0.00098–0.0037 in0.00098–0.0037 in0.025–0.094 mm

expand_moreRocker arms


Valve rocker arm ratio	1.5:1

expand_moreValve springs


Valve spring free length	2.02 in2.02 in51.3 mm

expand_moreValve spring installed height


Intake	1.69–1.71 in1.69–1.71 in42.92–43.43 mm
Exhaust	1.69–1.71 in1.69–1.71 in42.92–43.43 mm

expand_moreValve spring load


Closed	1.11–1.23 ft1.11–1.23 ft338–374 mm
Open	2.73–2.96 ft2.73–2.96 ft832–903 mm

expand_moreElectric engine

expand_moreBattery

expand_moreBase


Cold Cranking Amperage (CCA)	600 A600 A600 A
Reserve capacity rating	115 Minutes
Replacement Battery Number	78-6YR

expand_moreDual (optional)


Reserve capacity rating	115 Minutes
Replacement Battery Number	78-7YR
Cold Cranking Amperage (CCA)	770 A770 A770 A

expand_moreParallel hybrid truck HP2


GM part number	88986971
Replacement Battery Number	Panasonic HV1255


Starter motor	PG-260G

expand_moreGenerator

expand_moreBase


Generator model	Delphi AD230
Rated Output	102 A102 A102 A
Load test output	71 A71 A71 A

expand_moreDual (optional)


Generator model	Delphi AD244
Rated Output	130 A130 A130 A
Load test output	91 A91 A91 A

expand_moreBosch Generator


Generator model	Bosch 15755900
Rated Output	130 A130 A130 A
Load test output	91 A91 A91 A

Fastener Tightening Specifications

Condition	Value

expand_moreGeneral specifications


Accelerator cable bracket nuts for stud screws	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Accelerator cable bracket nut on throttle body	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Accelerator cable bracket stud bolts on intake manifold	4.43 lbf⋅ft4.43 lbf⋅ft6 N⋅m
Accelerator cable bracket stud bolts on throttle body	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Air cleaner bracket stud screws	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_moreBalance shaft driven gear screws


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Final stage	35°35°35°


Balance shaft retainer screws	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Battery wiring harness bracket bolt on the oil pan	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Battery negative wiring harness bolt on the engine block	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Battery positive wiring harness junction block bracket screws	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Belt idler pulley screws	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Camshaft retainer screws	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m

expand_moreMetric english


Camshaft sprocket screws	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreConnecting rod nuts


First stage	19.91 lbf⋅ft19.91 lbf⋅ft27 N⋅m
Final stage	70°70°70°


Crankshaft balancer screws	70.07 lbf⋅ft70.07 lbf⋅ft95 N⋅m

expand_moreCrankshaft bearing cap screws

expand_morePreferred method


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Final stage	73°73°73°


Crankshaft position sensor (CKP) screws	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Crankshaft pulley screws	42.78 lbf⋅ft42.78 lbf⋅ft58 N⋅m
Crankshaft rear oil seal housing bolt and nuts	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Crankshaft rear oil seal housing retainer stud screws	4.43 lbf⋅ft4.43 lbf⋅ft6 N⋅m
Crossmember screws	73.76 lbf⋅ft73.76 lbf⋅ft100 N⋅m

expand_moreCylinder head screws

expand_morePreferred method


First pass (all screws)	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Long bolts final pass in sequence	75°75°75°
Medium bolts final pass (in sequence)	65°65°65°
Short Bolts Final Pass in Sequence	55°55°55°


Cylinder head core hole plug	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Distributor cap screws	1.77 lbf⋅ft1.77 lbf⋅ft2.4 N⋅m
Distributor clamp screws	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Drive belt idler screws	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Drive belt tensioner screws	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Engine block left oil gallery plug	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Engine block rear left oil gallery plug	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Engine block rear right oil gallery plug	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Engine block coolant drain plug	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Engine block oil gallery plugs	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Engine coolant heater screws	1.48 lbf⋅ft1.48 lbf⋅ft2 N⋅m
Engine coolant temperature sensor (ECT)	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Engine flywheel screws	73.76 lbf⋅ft73.76 lbf⋅ft100 N⋅m
Engine front cover screws	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Engine lift front bracket stud screws	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Engine mount bracket screws	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Engine mount bracket screws to the engine block	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Engine mount bracket through-screws	55.32 lbf⋅ft55.32 lbf⋅ft75 N⋅m
Engine mount frame lateral screws	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Engine oil level sensor	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m
Engine oil pressure gage sensor	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Engine oil pressure gage sensor fitting	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Engine shield screws	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Junction block bracket screws	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Engine wiring harness bracket bolt on the generator and the tensioner bracket	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Engine wiring harness bracket nut on the evaporator canister purge solenoid valve	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Engine wiring harness bracket nut on the intake manifold	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Engine wiring harness bracket stud screws	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Engine wiring harness screws	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreEngine cooling


Auxiliary water pump bracket nuts	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Coolant heater screws	1.48 lbf⋅ft1.48 lbf⋅ft2 N⋅m
Coolant heater cord screws	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Engine block coolant drain plug	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
Engine shield screws	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Fan clutch screws	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
Fan clutch nuts	41.3 lbf⋅ft41.3 lbf⋅ft56 N⋅m
Fan shroud screws	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Hood hinge screws	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Radiator screws	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Starter and generator control module (SGCM) brace screws	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Starter and generator control module (SGCM) coolant pump screws	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Starter and generator control module (SGCM) coolant tank screws	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Starter and generator control module (SGCM) coolant tank nuts	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Starter and generator control module (SGCM) cooling fan screws	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Starter and generator control module (SGCM) radiator screws	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Starter and generator stator coolant inlet pipe screws	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Surge tank screws and nuts	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Thermal bypass fitting	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Thermal bypass hose screws	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Transmission control module (TCM) cover screws	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Transmission control module (TCM) electrical connector screws	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Water pump screws	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m
Water pump pulley screws	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreElectric engine


3-Phase wiring harness bracket cover screws	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
3-phase wiring harness bracket nuts	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
3-phase wiring harness cover nuts	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Starter and generator control module 3-phase wiring harness nuts	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Stator 3-phase wiring harness nuts	10.33 lbf⋅ft10.33 lbf⋅ft14 N⋅m
Air cleaner outlet ducts bracket	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m
ACC power receptacle ground harness screws	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Auxiliary battery wiring harness bracket screws	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Auxiliary battery positive wiring harness nuts	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Auxiliary battery relay nuts	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Auxiliary battery tray screws	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Auxiliary battery tray nuts	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Auxiliary negative battery wiring harness screws	12.54 lbf⋅ft12.54 lbf⋅ft17 N⋅m
Auxiliary positive battery wiring harness screws	12.54 lbf⋅ft12.54 lbf⋅ft17 N⋅m
Auxiliary positive battery wiring harness nuts	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Auxiliary positive wiring harness to relay nuts	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Battery wiring harness bracket screws	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Battery hold down retainer screws	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Battery tray screws	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Crossbar screws	73.76 lbf⋅ft73.76 lbf⋅ft100 N⋅m
Energy storage box (ESB) air duct hose to ESB screws	4.43 lbf⋅in4.43 lbf⋅in0.5 N⋅m
Energy storage box (ESB) air duct hose to Fan screws	8.85 lbf⋅in8.85 lbf⋅in1 N⋅m
Energy storage box (ESB) battery 1 to battery 2 power wiring harness nuts	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Energy storage box (ESB) battery 2 to battery 3 power wiring harness nuts	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Energy storage box (ESB) battery cut off switch nuts	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Energy storage box (ESB) battery bracket nuts	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Energy storage box (ESB) bracket nuts	34.67 lbf⋅ft34.67 lbf⋅ft47 N⋅m
Energy storage box (ESB) fan screws	8.85 lbf⋅in8.85 lbf⋅in1 N⋅m
Energy storage box (ESB) fuse bracket screws	1.48 lbf⋅ft1.48 lbf⋅ft2 N⋅m
Energy storage box (ESB) fuse power wiring harness to high current sensor nuts	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Energy storage box (ESB) ground wire screws	4.43 lbf⋅ft4.43 lbf⋅ft6 N⋅m
Energy storage box (ESB) ground strap nuts	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Energy storage box (ESB) high current connector screws	4.43 lbf⋅ft4.43 lbf⋅ft6 N⋅m
Energy storage box (ESB) high current connector to battery 3 nuts	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Energy storage box (ESB) high current sensor nuts	4.43 lbf⋅ft4.43 lbf⋅ft6 N⋅m
Energy storage box (ESB) intermediate cover screws	4.43 lbf⋅ft4.43 lbf⋅ft6 N⋅m
Energy storage box (ESB) maxi-fuse nuts	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Energy storage box (ESB) receptacle outlet cover screws	4.43 lbf⋅in4.43 lbf⋅in0.5 N⋅m
Energy storage box (ESB) receptacle outlet screws	1.48 lbf⋅ft1.48 lbf⋅ft2 N⋅m
Energy storage box (ESB) service disconnect switch screws and nuts	4.43 lbf⋅ft4.43 lbf⋅ft6 N⋅m
Energy storage box (ESB) service disconnect switch power wiring harness to high current connector nuts	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Energy storage box (ESB) service disconnect switch power wiring harness to service disconnect switch nuts	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Energy storage box (ESB) temperature sensor screws	4.43 lbf⋅in4.43 lbf⋅in0.5 N⋅m
Energy storage control module nuts	4.43 lbf⋅ft4.43 lbf⋅ft6 N⋅m
Engine ground harness screws	11.8 lbf⋅ft11.8 lbf⋅ft16 N⋅m
Engine wiring ground harness screws	11.8 lbf⋅ft11.8 lbf⋅ft16 N⋅m
Fender to cowl support brace screws	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Flexplate screws	73.76 lbf⋅ft73.76 lbf⋅ft100 N⋅m
Forward lamp wiring ground harness screws	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Front end diagonal brace screws	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Generator screws	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Generator bracket	30.24 lbf⋅ft30.24 lbf⋅ft41 N⋅m
Generator wiring harness nuts	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Ground strap nut (energy storage box)	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Harness clip to junction block bracket screws	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Heater hose bracket screws	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Hybrid Control Module bracket screws	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
J-46093 screws	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Negative Battery wiring harness screws	12.54 lbf⋅ft12.54 lbf⋅ft17 N⋅m
Positive battery wiring harness screws	12.54 lbf⋅ft12.54 lbf⋅ft17 N⋅m
Positive wiring harness at underhood bussed electrical center (UBEC) screws	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Positive/Negative battery wiring harness bolt 14V	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Positive/Negative battery wiring harness channel rear nut 42V	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Positive/Negative battery wiring harness grommet nut 42V	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Positive/Negative battery wiring ground harness strap bolts 42V	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Starter screws	31.72 lbf⋅ft31.72 lbf⋅ft43 N⋅m
Starter and generator control module (SGCM) screws	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Starter and generator control module (SGCM) brace screws	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Starter and generator control module (SGCM) bracket screws	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Starter and generator control module (SGCM) bracket nuts	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Starter and generator control module (SGCM) coolant tank screws	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Starter and generator control module (SGCM) cover screws	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Starter and generator stator stud screws	11.8 lbf⋅ft11.8 lbf⋅ft16 N⋅m
Starter lead nuts	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Starter solenoid nuts	2.51 lbf⋅ft2.51 lbf⋅ft3.4 N⋅m
Transmission fill tube nuts	13.28 lbf⋅ft13.28 lbf⋅ft18 N⋅m
Transmission heat shield	12.54 lbf⋅ft12.54 lbf⋅ft17 N⋅m
Transmission mount nuts	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Transmission support screws and nuts	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m
Wiring harness bracket screws	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreEngine controls


Accelerator cable bracket stud bolts and nuts	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Accelerator cable bracket nuts	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Air cleaner outlet ducts bracket	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m
Air cleaner outlet resonator stud screws	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Camshaft position (CMP) sensor screws	1.62 lbf⋅ft1.62 lbf⋅ft2.2 N⋅m
Crankshaft position sensor (CKP) screws	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Distributor hold down screws	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Distributor cap screws	1.77 lbf⋅ft1.77 lbf⋅ft2.4 N⋅m
Engine coolant temperature sensor (ECT)	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Engine shield screws	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
EVAP canister bracket screws	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
EVAP canister purge valve nuts	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
EVAP canister ventilation valve bracket screws	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Fuel lines bracket screws	4.43 lbf⋅ft4.43 lbf⋅ft6 N⋅m
Fuel lines bracket on the transmission	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Fuel lines fittings	20.65 lbf⋅ft20.65 lbf⋅ft28 N⋅m
Fuel lines nuts	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Fuel injector bracket lock nuts	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Fuel tank ground strap screws	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Fuel tank filler housing to body screws	1.7 lbf⋅ft1.7 lbf⋅ft2.3 N⋅m
Fuel tank filler housing to fuel tank screws	1.7 lbf⋅ft1.7 lbf⋅ft2.3 N⋅m
Fuel tank filler hose clamp	1.84 lbf⋅ft1.84 lbf⋅ft2.5 N⋅m
Fuel line fittings	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Fuel tank shield screws	13.28 lbf⋅ft13.28 lbf⋅ft18 N⋅m
Fuel tank strap screws	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Heated oxygen sensor	30.98 lbf⋅ft30.98 lbf⋅ft42 N⋅m
Idle air control valve screws	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Ignition coil bracket stud screws	8.11 lbf⋅ft8.11 lbf⋅ft11 N⋅m
Ignition module screws	2.58 lbf⋅ft2.58 lbf⋅ft3.5 N⋅m
Knock sensor screws	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Mass air flow (MAF) hose clamp	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m
Powertrain control module (PCM) electrical connector	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Rotor screws	1.48 lbf⋅ft1.48 lbf⋅ft2 N⋅m

expand_moreSpark Plug


New aluminium head	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
New iron head	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Used head	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m


Throttle body stud screws	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Throttle position sensor (TPS) screws	1.48 lbf⋅ft1.48 lbf⋅ft2 N⋅m

expand_moreExhaust system


Exhaust bracket screws	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Exhaust heat shield bolt (body panel)	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Exhaust heat shield nut (body panel)	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Exhaust manifold stud screws	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Exhaust manifold heat shields	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Exhaust manifold pipe nuts	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Exhaust muffler hanger nuts	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Exhaust muffler nuts	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Exhaust pipe clamp	32.45 lbf⋅ft32.45 lbf⋅ft44 N⋅m
Exhaust pipe bracket bolt 4L60-E	12.54 lbf⋅ft12.54 lbf⋅ft17 N⋅m
Hood hinge screws	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Outlet duct clamp	4.43 lbf⋅ft4.43 lbf⋅ft6 N⋅m
Oxygen Sensor	30.98 lbf⋅ft30.98 lbf⋅ft42 N⋅m
Rear shock absorber lower screws	70.07 lbf⋅ft70.07 lbf⋅ft95 N⋅m
Spark plug wire retainer screws	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Transmission screws	73.76 lbf⋅ft73.76 lbf⋅ft100 N⋅m
Transmission mount to support nuts	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Transmission support crossmember screws	70.07 lbf⋅ft70.07 lbf⋅ft95 N⋅m