2010 Ford Transit Van Third generation facelift (MK7) Transmission Fastener Tightening Specifications
in your garage to make future searches easy.
| Condition | Value |
|---|
| With single tires | 2.95 lbf⋅ft |
| With twin tires | 98.83 lbf⋅ft |
| Retaining clamp | 18.44 lbf⋅ft |
| First stage | Turn wheel hub by 5 turns. |
| Replace nuts. | |
| Second stage | 184.39 lbf⋅ft |
| Third stage | Turn wheel hub by 5 turns. |
| Fourth stage | 368.78 lbf⋅ft |
| Fifth stage | Turn wheel hub by 5 turns. |
| Replace locking pins. | |
| At the differential | 59 lbf⋅ft |
| Replace screws. | |
| M14 | 129.07 lbf⋅ft |
| Replace screws. | |
| At the differential | 59 lbf⋅ft |
| Replace screws. | |
| M12 | 84.82 lbf⋅ft |
| Replace screws. | |
| M14 | 129.07 lbf⋅ft |
| Replace screws. | |
| Propeller shaft intermediate bearing | 16.23 lbf⋅ft |
| Replace screws. | |
| Propeller shaft | 129.07 lbf⋅ft |
| Replace screws. | |
| Clutch master cylinder | 6.64 lbf⋅ft |
| Clutch pressure plate | 21.39 lbf⋅ft |
| Tighten cross-wise. | |
| Clutch slave cylinder | 8.11 lbf⋅ft |
| Differential cover | 44.99 lbf⋅ft |
| Replace screws. | |
| With all-wheel drive | 36.88 lbf⋅ft |
| With all-wheel drive | 25.81 lbf⋅ft |
| Rear axle differential oil filler screws | 22.13 lbf⋅ft |
| Gearbox shift lever bracket | 19.18 lbf⋅ft |
| Selector cable linkage | 22.13 lbf⋅ft |
| Gearbox flange connection at engine | 29.5 lbf⋅ft |
| With transfer case | 36.88 lbf⋅ft |
| 2 pieces | |
| With transfer case | 25.81 lbf⋅ft |
| MT-75 gearbox | 25.81 lbf⋅ft |
| VMT6 gearbox | 25.81 lbf⋅ft |
| MT82 gearbox | 36.88 lbf⋅ft |
| MT-75 gearbox | 25.81 lbf⋅ft |
| Oil control screw. | |
| VMT6 gearbox | 25.81 lbf⋅ft |
| MT82 gearbox | 25.81 lbf⋅ft |
| Oil filler screws | 25.81 lbf⋅ft |
| Bottom | 84.82 lbf⋅ft |
| Top | 98.1 lbf⋅ft |
| On chassis | 51.63 lbf⋅ft |
| Bottom | 84.82 lbf⋅ft |
| Top | 98.1 lbf⋅ft |
| On chassis | 51.63 lbf⋅ft |
| Bottom | 84.82 lbf⋅ft |
| Top | 98.1 lbf⋅ft |
| On chassis | 51.63 lbf⋅ft |
| At the subframe | 40.57 lbf⋅ft |
| At the gearbox | 59 lbf⋅ft |
| At the gearbox | 70.07 lbf⋅ft |
| Stud screws | 7.38 lbf⋅ft |
| Lateral-fitting | 70.07 lbf⋅ft |
| Top | 51.63 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2010 Ford Transit Van user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Ford warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Gearbox Oil Capacity
- Manual Transmission Oil Capacity
- Steering Fluid Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Ford Transit Van service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2010 Ford Transit Van you're not only saving money, but also also improving your technical skills and learning something new.