2006 Ford Transit Van Third generation (MK6) Front Suspension Fastener Tightening Specifications
in your garage to make future searches easy.
| Condition | Value |
|---|
| At the brake caliper | 22.13 lbf⋅ft |
| Brake line | 11.8 lbf⋅ft |
| Front axle brake caliper | 23.6 lbf⋅ft |
| On stub axle | 129.07 lbf⋅ft |
| Front axle brake disc | 50.89 lbf⋅ft |
| Wheel speed sensor | 5.9 lbf⋅ft |
| Lower steering column joint | 16.96 lbf⋅ft |
| Replace bolts. | |
| Pressure line at steering gear | 18.44 lbf⋅ft |
| Return line to steering gear | 18.44 lbf⋅ft |
| Steering gear | 84.82 lbf⋅ft |
| Track rod end on stub axle | 59 lbf⋅ft |
| Replace nuts. | |
| Track rod end on track rod | 59 lbf⋅ft |
| Track rod on steering gear | 88.51 lbf⋅ft |
| Shock-absorber piston rod | 51.63 lbf⋅ft |
| On chassis | 22.13 lbf⋅ft |
| On stub axle | 66.38 lbf⋅ft |
| First stage | Turn wheel hub by 5 turns. |
| Replace nuts. | |
| Second stage | 184.39 lbf⋅ft |
| Third stage | Turn wheel hub by 5 turns. |
| Fourth stage | 309.78 lbf⋅ft |
| Fifth stage | Turn wheel hub by 5 turns. |
| Replace locking pins. | |
| Front axle stabiliser mounting | 22.13 lbf⋅ft |
| With rigid stabilizer support | 18.44 lbf⋅ft |
| With ball joint | 40.57 lbf⋅ft |
| With ball joint | 40.57 lbf⋅ft |
| Stabilizer mounting at the subframe | 22.13 lbf⋅ft |
| Support joint at the transverse control arm | 110.63 lbf⋅ft |
| Replace nuts. | |
| Front | 129.07 lbf⋅ft |
| Rear | 184.39 lbf⋅ft |
| First stage | Turn wheel hub by 5 turns. |
| Replace nuts. | |
| Second stage | 184.39 lbf⋅ft |
| Third stage | Turn wheel hub by 5 turns. |
| Fourth stage | 309.78 lbf⋅ft |
| Fifth stage | Turn wheel hub by 5 turns. |
| Replace locking pins. | |
| Wheel bearing unit | 39.09 lbf⋅ft |
| Wheel attachment | 147.51 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2006 Ford Transit Van user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Ford warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Steering Fluid Capacity
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Ford Transit Van service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2006 Ford Transit Van you're not only saving money, but also also improving your technical skills and learning something new.
2006 Ford Transit Van generations
In 2006 Ford offered 2 generations of the Transit Van. Front suspension fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.