2021 Ford Transit Flatbed and Chassis Fourth generation (MK8) Front Suspension Fastener Tightening Specifications
in your garage to make future searches easy.
| Condition | Value |
|---|
| Brake hose | 12.54 lbf⋅ft |
| Brake line | 11.06 lbf⋅ft |
| Front axle brake caliper | 44.25 lbf⋅ft |
| Front axle brake caliper mounting support | 199.14 lbf⋅ft |
| First stage | 22.13 lbf⋅ft |
| Replace screws. | |
| Second stage | 90° |
| M12 | 81.13 lbf⋅ft |
| Replace screws. | |
| First stage | 22.13 lbf⋅ft |
| Replace screws. | |
| Second stage | 90° |
| Wheel speed sensor | 8.11 lbf⋅ft |
| Lower steering column joint | 20.65 lbf⋅ft |
| Pressure line at steering gear | 18.44 lbf⋅ft |
| Return line to steering gear | 18.44 lbf⋅ft |
| Steering column | 14.75 lbf⋅ft |
| Steering gear | 84.82 lbf⋅ft |
| Steering gear heat protection plate | 5.16 lbf⋅ft |
| Steering wheel | 35.4 lbf⋅ft |
| Track rod end on stub axle | 35.4 lbf⋅ft |
| Track rod end on track rod | 66.38 lbf⋅ft |
| Track rod on steering gear | 66.38 lbf⋅ft |
| Shock-absorber piston rod | 51.63 lbf⋅ft |
| On chassis | 22.13 lbf⋅ft |
| First stage | 73.76 lbf⋅ft |
| Replace screws and nuts. | |
| Second stage | 180° |
| First stage | 184.39 lbf⋅ft |
| Second stage | Turn wheel hub by 5 turns. |
| Third stage | 368.78 lbf⋅ft |
| Fourth stage | Turn wheel hub by 5 turns. |
| Fifth stage | Secure nut(s). |
| Stabiliser mounting at the stabiliser | 40.57 lbf⋅ft |
| Stabiliser mounting at suspension strut | 40.57 lbf⋅ft |
| Stabilizer mounting at the subframe | 45.73 lbf⋅ft |
| Support joint at the stub axle | 46.47 lbf⋅ft |
| M16 nuts | 110.63 lbf⋅ft |
| Replace nuts. | |
| M20 nuts | 184.39 lbf⋅ft |
| Replace nuts. | |
| At the subframe | 202.83 lbf⋅ft |
| On stub axle | 39.09 lbf⋅ft |
| Replace screws. | |
| Torx screws | 1.11 lbf⋅ft |
| Replace screws. | |
| Union nuts | 5.9 lbf⋅ft |
| Replace nuts. | |
| Wheel attachment | 147.51 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2021 Ford Transit Flatbed and Chassis user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Ford warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Diesel Exhaust Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Steering Fluid Capacity
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Ford Transit Flatbed and Chassis service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2021 Ford Transit Flatbed and Chassis you're not only saving money, but also also improving your technical skills and learning something new.