2019 Ford Transit Connect Box Second generation facelift (MK2) Engine Oil Capacity
For 2019 Transit Connect Box Second generation facelift (MK2) Ford recommends to use: WSS-M2C913-C, WSS-M2C948-B, WSS-M2C913-D, and WSS-M2C950-A engine oils. To select the right engine oil see the table below.
How much engine oil you need to put into 2019 Transit Connect Box depends on the engine installed, and some other conditions listed below.
in your garage to make future searches easy.
Condition | Volume |
---|
Amount to change | 4.28 US qt. |
Engine oil: WSS-M2C913-C | |
New filling | 4.97 US qt. |
Engine oil: WSS-M2C913-C |
Amount to change | 4.86 US qt. |
Engine oil: WSS-M2C948-B | |
New filling | 5.34 US qt. |
Engine oil: WSS-M2C948-B |
Amount to change | 6.55 US qt. |
Engine oil: WSS-M2C913-D | |
New filling | 7.4 US qt. |
Engine oil: WSS-M2C913-D |
Amount to change | 4.07 US qt. |
Engine oil: WSS-M2C950-A, WSS-M2C913-D | |
New filling | 4.49 US qt. |
Engine oil: WSS-M2C950-A, WSS-M2C913-D |
Replacing engine oil in your 2019 Ford Transit Connect Box is quite an easy task. It's a bit dirty, but everyone can handle it. It will take about 30–60 minutes depends on your skill level and might save you $10–$30 depends on the region you live in.
First unscrew the refill cap on the top of the engine. Use a ratchet with the correct size head to unscrew the drain plug on the engine oil pan located on the bottom side of the engine, and drain old oil. You might need to unscrew a few more screws to remove protection covers underneath your car to get access to the oil pan and the oil filter. Then using an oil filter wrench unscrew the old oil filter. Then lubricate a new filter rubber gasket with clean engine oil and install the new filter. Install a new drain plug, and with help of a funnel refill the engine with new engine oil.
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2019 Ford Transit Connect Box user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Ford warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Ford Transit Connect Box service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2019 Ford Transit Connect Box you're not only saving money, but also also improving your technical skills and learning something new.
2019 Ford Transit Connect Box generations
In 2019 Ford offered 2 generations of the Transit Connect Box. Engine oil capacity may vary in different generations. Be sure that you are looking at the rigt modification.