2003 Ford Transit Box Third generation (MK6) Transmission Fastener Tightening Specifications
in your garage to make future searches easy.
| Condition | Value |
|---|
| Axle codes: E, F, H, J, K, L, and R | 2.95 lbf⋅ft |
| Axle codes: A, B, C, D, G, M, P, X, and Y | 86.29 lbf⋅ft |
| Axle codes: E, F, H, J, K, L, and R | 98.83 lbf⋅ft |
| Drive shaft intermediate bearing | 18.44 lbf⋅ft |
| First stage | Turn wheel hub by 5 turns. |
| Replace nuts. | |
| Second stage | 184.39 lbf⋅ft |
| Third stage | Turn wheel hub by 5 turns. |
| Fourth stage | 309.78 lbf⋅ft |
| Fifth stage | Turn wheel hub by 5 turns. |
| Replace locking pins. | |
| At the differential | 59 lbf⋅ft |
| Replace screws. | |
| At the gearbox | 59 lbf⋅ft |
| Replace screws. | |
| At the differential | 59 lbf⋅ft |
| Replace screws. | |
| M12 | 84.82 lbf⋅ft |
| Replace screws. | |
| M14 | 129.07 lbf⋅ft |
| Replace screws. | |
| Propeller shaft intermediate bearing | 16.23 lbf⋅ft |
| Replace screws. | |
| Clutch pressure plate | 21.39 lbf⋅ft |
| Clutch slave cylinder | 7.38 lbf⋅ft |
| Axle codes: A, B, C, D, G, M, P, X, and Y | 33.19 lbf⋅ft |
| Axle codes: E, F, H, J, K, L, and R | 44.99 lbf⋅ft |
| Rear axle differential oil control screws | 25.08 lbf⋅ft |
| Axle codes: A, B, C, D, G, M, P, X, and Y | 22.13 lbf⋅ft |
| Axle codes: E, F, H, J, K, L, and R | 25.08 lbf⋅ft |
| Gearbox shift lever bracket | 19.18 lbf⋅ft |
| Selector cable linkage | 29.5 lbf⋅ft |
| Gearbox flange connection at engine | 29.5 lbf⋅ft |
| MT 75 gearbox | 25.81 lbf⋅ft |
| MT82 gearbox | 36.88 lbf⋅ft |
| MT82 gearbox | 36.88 lbf⋅ft |
| MT 75 gearbox | 25.81 lbf⋅ft |
| MT82 gearbox | 36.88 lbf⋅ft |
| MT 75 gearbox | 25.81 lbf⋅ft |
| Gearbox oil filler plug | 25.81 lbf⋅ft |
| Screws at the gearbox bracket | 110.63 lbf⋅ft |
| Nuts at the gearbox bracket | 98.1 lbf⋅ft |
| Screws at the gearbox bracket | 84.82 lbf⋅ft |
| On chassis | 51.63 lbf⋅ft |
| Screws at the gearbox bracket | 110.63 lbf⋅ft |
| Nuts at the gearbox bracket | 98.1 lbf⋅ft |
| Screws at the gearbox bracket | 84.82 lbf⋅ft |
| On chassis | 51.63 lbf⋅ft |
| At the subframe | 29.5 lbf⋅ft |
| At the gearbox | 40.57 lbf⋅ft |
| At the gearbox | 51.63 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2003 Ford Transit Box user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Ford warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Steering Fluid Capacity
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Ford Transit Box service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2003 Ford Transit Box you're not only saving money, but also also improving your technical skills and learning something new.