2004 Ford Street Ka First generation (MK1) Engine Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
Intake manifold | 13.28 lbf⋅ft |
Auxiliary drive belt deflection pulley | 35.4 lbf⋅ft |
Air-conditioning compressor | 18.44 lbf⋅ft |
Servo steering pump | 18.44 lbf⋅ft |
Coolant pump | 7.38 lbf⋅ft |
Coolant pump pulley | 8.85 lbf⋅ft |
Camshaft bearing | 6.64 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Replace screws. See figure 1. | |
Fourth stage | 120° |
Second stage | 11.06 lbf⋅ft |
Replace screws. | |
Third stage | 45° |
Valve cover | 6.64 lbf⋅ft |
First stage | 2.95 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Crankshaft central screws | 92.2 lbf⋅ft |
Flywheel | 49.42 lbf⋅ft |
Main bearing | 70.07 lbf⋅ft |
Camshaft timing gear | 55.32 lbf⋅ft |
Chain tensioner | 29.5 lbf⋅ft |
Oil drain plug | 18.44 lbf⋅ft |
Onto crankcase | 14.75 lbf⋅ft |
First stage | 4.43 lbf⋅ft |
Second stage | 6.64 lbf⋅ft |
Camshaft sensor | 3.69 lbf⋅ft |
Crankshaft sensor | 7.38 lbf⋅ft |
Knock sensor | 14.75 lbf⋅ft |
Lambda sensor | 34.67 lbf⋅ft |
At the cylinder head | 18.44 lbf⋅ft |
On engine mounting | 35.4 lbf⋅ft |
First stage | 11.06 lbf⋅ft |
Second stage | 14.75 lbf⋅ft |
Heat shields | 7.38 lbf⋅ft |
Spark plugs | 11.06 lbf⋅ft |
Starter | 25.81 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2004 Ford Street Ka user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Ford warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Ford Street Ka service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2004 Ford Street Ka you're not only saving money, but also also improving your technical skills and learning something new.