2026 Ford S-Max Second generation (MK2) Transmission Fastener Tightening Specifications
in your garage to make future searches easy.
| Condition | Value |
|---|
| Drive shaft heat protection plate | 7.38 lbf⋅ft |
| Support | 35.4 lbf⋅ft |
| Otherwise | 18.44 lbf⋅ft |
| Support | 35.4 lbf⋅ft |
| On transfer case | 45.73 lbf⋅ft |
| First stage | 59 lbf⋅ft |
| Replace nuts. | |
| Second stage | 90° |
| Rear axle propeller shaft | 25.81 lbf⋅ft |
| Replace screws. | |
| Propeller shaft intermediate bearing | 14.75 lbf⋅ft |
| Rear axle drive shaft | 147.51 lbf⋅ft |
| Replace nuts. | |
| Transfer case propeller shaft rear axle | 25.81 lbf⋅ft |
| Replace screws and nuts. | |
| Clutch pressure plate | 21.39 lbf⋅ft |
| Clutch slave cylinder | 8.11 lbf⋅ft |
| On rear axle | 66.38 lbf⋅ft |
| Back-up lamp switch | 14.75 lbf⋅ft |
| Selector cable linkage | 18.44 lbf⋅ft |
| Gearbox flange connection at engine | 35.4 lbf⋅ft |
| Torque converter | 35.4 lbf⋅ft |
| 6F35 gearbox | 8.11 lbf⋅ft |
| All other modifications | 6.64 lbf⋅ft |
| All Ford gasoline straight-4 2.0 L R9CD engines | 25.81 lbf⋅ft |
| MMT6 gearbox | 25.81 lbf⋅ft |
| MPS6 gearbox | 31.72 lbf⋅ft |
| All Ford gasoline straight-4 2.0 L R9CD engines | 25.81 lbf⋅ft |
| All Ford gasoline straight-4 2.0 L R9CI engines | 25.81 lbf⋅ft |
| MMT6 gearbox | 25.81 lbf⋅ft |
| MPS6 gearbox | 31.72 lbf⋅ft |
| MPS6 gearbox | 14.75 lbf⋅ft |
| All Ford gasoline straight-4 2.0 L R9CD engines | 8.85 lbf⋅ft |
| All Ford gasoline straight-4 2.0 L R9CI engines | 8.85 lbf⋅ft |
| All other modifications | 7.38 lbf⋅ft |
| M10 | 5.9 lbf⋅ft |
| 6F35 gearbox | 4.43 lbf⋅ft |
| On chassis | 18.44 lbf⋅ft |
| At the gearbox | 18.44 lbf⋅ft |
| Bevel gear heat protection plate | 7.38 lbf⋅ft |
| Transfer box onto transmission flange connection | 59 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2026 Ford S-Max user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Ford warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Ford S-Max service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2026 Ford S-Max you're not only saving money, but also also improving your technical skills and learning something new.