2007 Ford Ranger front suspension fastener tightening specifications

in your garage to make future searches easy.

Condition	Value

expand_moreFront axle brake

expand_moreBleed valve

expand_moreWith increased ground clearance


Front	4.43–6.64 lbf⋅ft4.43–6.64 lbf⋅ft6–9 N⋅m


Otherwise	6.64–10.33 lbf⋅ft6.64–10.33 lbf⋅ft9–14 N⋅m


Brake hose	16.23–21.39 lbf⋅ft16.23–21.39 lbf⋅ft22–29 N⋅m
Brake line	9.59–15.49 lbf⋅ft9.59–15.49 lbf⋅ft13–21 N⋅m

expand_moreFront axle brake caliper


On caliper support	21.39–25.08 lbf⋅ft21.39–25.08 lbf⋅ft29–34 N⋅m

expand_moreFront axle brake caliper mounting support


On stub axle	79.66–93.67 lbf⋅ft79.66–93.67 lbf⋅ft108–127 N⋅m

expand_moreFront axle brake disc


With low ground clearance	39.83–50.89 lbf⋅ft39.83–50.89 lbf⋅ft54–69 N⋅m


Wheel speed sensor	14.01–18.44 lbf⋅ft14.01–18.44 lbf⋅ft19–25 N⋅m

expand_moreFront axle steering


Pressure line at steering gear	16.96–25.81 lbf⋅ft16.96–25.81 lbf⋅ft23–35 N⋅m

expand_moreSteering gear

expand_more2.5 TDCi 4x4 with diesel straight-4 2.5 L 141 HP engine (2006.5–2012.7)


On frame	31.72–47.94 lbf⋅ft31.72–47.94 lbf⋅ft43–65 N⋅m

expand_more3.0 TDCi with diesel straight-4 3.0 L 154 HP at 3200 RPM, 380 N⋅m at 1800 RPM engine (2006.5–2012.7)


On frame	32.45–47.94 lbf⋅ft32.45–47.94 lbf⋅ft44–65 N⋅m


Track rod end on stub axle	32.45–43.52 lbf⋅ft32.45–43.52 lbf⋅ft44–59 N⋅m
Insert new locking pin.
Track rod end on track rod	50.89–57.53 lbf⋅ft50.89–57.53 lbf⋅ft69–78 N⋅m

expand_moreFront axle suspension

expand_moreShock absorber

expand_more2.5 TDCi 4x4 with diesel straight-4 2.5 L 141 HP engine (2006.5–2012.7)


Connection clamp at the transverse control arm	50.89–68.59 lbf⋅ft50.89–68.59 lbf⋅ft69–93 N⋅m

expand_more3.0 TDCi with diesel straight-4 3.0 L 154 HP at 3200 RPM, 380 N⋅m at 1800 RPM engine (2006.5–2012.7)


At the transverse control arm	50.89–68.59 lbf⋅ft50.89–68.59 lbf⋅ft69–93 N⋅m

expand_moreWheel suspension

expand_moreFront axle drive shaft


Central nuts	173.33–231.59 lbf⋅ft173.33–231.59 lbf⋅ft235–314 N⋅m
Replace and caulk the nut.


Front axle stabiliser mounting	16.23–19.18 lbf⋅ft16.23–19.18 lbf⋅ft22–26 N⋅m
Stabiliser mounting at the stabiliser	25.08–26.55 lbf⋅ft25.08–26.55 lbf⋅ft34–36 N⋅m

expand_moreSupport joint at the stub axle


Bottom	115.8–154.15 lbf⋅ft115.8–154.15 lbf⋅ft157–209 N⋅m
Top	27.29–37.62 lbf⋅ft27.29–37.62 lbf⋅ft37–51 N⋅m

expand_moreSupport joint at the transverse control arm


Bottom	40.57–49.42 lbf⋅ft40.57–49.42 lbf⋅ft55–67 N⋅m
Top	20.65–26.55 lbf⋅ft20.65–26.55 lbf⋅ft28–36 N⋅m

expand_moreUpper transverse control arm


On frame	110.63–126.86 lbf⋅ft110.63–126.86 lbf⋅ft150–172 N⋅m


Lower front transverse control arm	87.03–115.8 lbf⋅ft87.03–115.8 lbf⋅ft118–157 N⋅m

expand_moreStabilizer of front axle on axle


2.5 TDdi with diesel straight-4 2.5 L 141 HP engine (2006.5–2012.7)	18.44–26.55 lbf⋅ft18.44–26.55 lbf⋅ft25–36 N⋅m

expand_moreWheel hub wheel bearing


With increased ground clearance central nuts	173.33–231.59 lbf⋅ft173.33–231.59 lbf⋅ft235–314 N⋅m
Replace nuts.
With low ground clearance	set without play

expand_moreWheels and tires


Wheel attachment	64.91–87.03 lbf⋅ft64.91–87.03 lbf⋅ft88–118 N⋅m

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2007 Ford Ranger user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Ford warranty policy for your region. In some regions DIY service may invalidate your warranty.

Maintenance Items

Engine Fastener Tightening Specifications
Front Suspension Fastener Tightening Specifications
Rear Suspension Fastener Tightening Specifications
Transmission Fastener Tightening Specifications

Service Intervals

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Ford Ranger service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2007 Ford Ranger you're not only saving money, but also also improving your technical skills and learning something new.

2007 Ford Ranger Second generation (non-US version) Front Suspension Fastener Tightening Specifications

Table of Contents

Conquer your fears and never give up!

Ford Ranger Second generation (non-US version) model years

Suggest edit