1.8 i 16V 4x4 with gasoline straight-4 1.8 L 114 HP engine (1993.4–1996.8)
41.3 lbf⋅ft41.3 lbf⋅ft56 N⋅m
2.0 i 16V 4x4 with gasoline straight-4 2.0 L 130 HP engine (1994.12–1996.8)
41.3 lbf⋅ft41.3 lbf⋅ft56 N⋅m
2.0 i 16V 4x4 with gasoline straight-4 2.0 L 134 HP engine (1993.4–1996.8)
41.3 lbf⋅ft41.3 lbf⋅ft56 N⋅m
All other modifications
30.24 lbf⋅ft30.24 lbf⋅ft41 N⋅m
Rear axle brake caliper mounting support
43.52 lbf⋅ft43.52 lbf⋅ft59 N⋅m
expand_moreRear axle suspension
expand_moreRear axle shock absorber
On chassis
61.96 lbf⋅ft61.96 lbf⋅ft84 N⋅m
On stub axle
88.51 lbf⋅ft88.51 lbf⋅ft120 N⋅m
expand_moreRear axle wheel suspension
expand_moreLower front transverse control arm
On chassis
61.96 lbf⋅ft61.96 lbf⋅ft84 N⋅m
On stub axle
61.96 lbf⋅ft61.96 lbf⋅ft84 N⋅m
expand_moreLower rear transverse control arm
On chassis
61.96 lbf⋅ft61.96 lbf⋅ft84 N⋅m
On stub axle
88.51 lbf⋅ft88.51 lbf⋅ft120 N⋅m
expand_moreRear axle longitudinal control arm
On chassis
88.51 lbf⋅ft88.51 lbf⋅ft120 N⋅m
On stub axle
88.51 lbf⋅ft88.51 lbf⋅ft120 N⋅m
Rear axle stabilizer at the axle control arm
25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Rear axle stabilizer mounting
16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
Rear axle stabilizer support at the axle control arm
25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Rear axle stabilizer support at the stabilizer
25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Track control arm upper
61.96 lbf⋅ft61.96 lbf⋅ft84 N⋅m
expand_moreWheel hub wheel bearing
expand_more1.8 i 16V 4x4 with gasoline straight-4 1.8 L 114 HP engine (1993.4–1996.8)
Nuts
199.14 lbf⋅ft199.14 lbf⋅ft270 N⋅m
Screws
50.15 lbf⋅ft50.15 lbf⋅ft68 N⋅m
expand_more2.0 i 16V 4x4 with gasoline straight-4 2.0 L 130 HP engine (1994.12–1996.8)
Nuts
199.14 lbf⋅ft199.14 lbf⋅ft270 N⋅m
Screws
50.15 lbf⋅ft50.15 lbf⋅ft68 N⋅m
All other modifications
47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
expand_moreWheels and tires
Wheel attachment
62.69 lbf⋅ft62.69 lbf⋅ft85 N⋅m
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 1996 Ford Mondeo Wagon user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Ford warranty policy for your region. In some regions DIY service may invalidate your warranty.
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Ford Mondeo Wagon service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 1996 Ford Mondeo Wagon you're not only saving money, but also also improving your technical skills and learning something new.
1996 Ford Mondeo Wagon generations
In 1996 Ford offered 2 generations of the Mondeo Wagon. Rear suspension fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.