in your garage to make future searches easy.

Condition Value
expand_moreFront axle brake
Bleed valve 6.64 lbf⋅ft
Brake hose 13.28 lbf⋅ft
Brake line 11.06 lbf⋅ft
Front axle brake caliper 20.65 lbf⋅ft
Front axle brake caliper mounting support 129.07 lbf⋅ft
Wheel speed sensor 3.69 lbf⋅ft
expand_moreFront axle steering
Lower steering column joint 20.65 lbf⋅ft
Replace screws.
expand_moreSteering gear
expand_moreAt the subframe
First stage 81.13 lbf⋅ft
Second stage 360° detach
Third stage 40.57 lbf⋅ft
Fourth stage 180°
Steering gear heat protection plate 5.16 lbf⋅ft
Track rod end on stub axle 35.4 lbf⋅ft
expand_moreFront axle suspension
Shock-absorber piston rod 40.57 lbf⋅ft
expand_moreSuspension strut
On chassis 25.81 lbf⋅ft
expand_moreOn stub axle
First stage 59 lbf⋅ft
Second stage 180°
expand_moreWheel suspension
expand_moreFront axle drive shaft
expand_moreCentral nuts
First stage 59 lbf⋅ft
Second stage 90°
Stabiliser mounting at the stabiliser 45.73 lbf⋅ft
Stabiliser mounting at suspension strut 35.4 lbf⋅ft
expand_moreStabilizer mounting at the subframe
First stage 84.82 lbf⋅ft
Second stage 90°
Support joint at the stub axle 61.22 lbf⋅ft
Replace screws.
expand_moreTransverse control arm
expand_moreAt the front side at the subframe
First stage 110.63 lbf⋅ft
Second stage 90°
expand_moreAt the subframe on the rear side
First stage 84.82 lbf⋅ft
Second stage 90°
expand_moreWheels and tires
expand_moreTire pressure sensors
Torx screws 1.11 lbf⋅ft
Replace screws.
Union nuts 5.9 lbf⋅ft
Replace nuts.
expand_moreWheel attachment
First stage Tighten bolt(s) until hand-tight.
Second stage 99.57 lbf⋅ft
Tighten screws crosswise.

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2016 Ford Kuga user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Ford warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Ford Kuga service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2016 Ford Kuga you're not only saving money, but also also improving your technical skills and learning something new.

2016 Ford Kuga generations

In 2016 Ford offered 2 generations of the Kuga. Front suspension fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.

Ford Kuga Second generation (MK2) model years

Units:
facebook twitter reddit linkedin messenger whatsapp telegram skype email chat