2012 Ford Kuga engine fastener tightening specifications

in your garage to make future searches easy.

Condition	Value

expand_moreAir intake system

expand_moreIntake manifold


All other modifications	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreAuxiliary assemblies


Auxiliary drive belt tensioner	35.4 lbf⋅ft35.4 lbf⋅ft48 N⋅m
Air-conditioning compressor	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Air-conditioning compressor bracket	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Air-conditioning compressor pressure line	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m

expand_moreAlternator


All other modifications	30.24 lbf⋅ft30.24 lbf⋅ft41 N⋅m


Generator bracket	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreVacuum pump


All other modifications	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreCarburetion


Fuel-distributing pipe	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m

expand_moreHigh-pressure line


All other modifications	19.91 lbf⋅ft19.91 lbf⋅ft27 N⋅m
Replace high-pressure line.

expand_moreHigh-pressure pump


All other modifications	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreHigh-pressure pump drive wheel

expand_moreAll other modifications

expand_moreHousing with 10 screws (screws 1 – 10)

Figure 1. Carburetion, High-pressure pump drive wheel, All other modifications, Housing with 10 screws (screws 1 – 10).


First stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
See figure 1.
Second stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Third stage	8.11 lbf⋅ft8.11 lbf⋅ft11 N⋅m

expand_moreHousing with 10 screws (screws 1, 2, 5, 6, 7, 8, 9, and 10)


Fourth stage	10.33 lbf⋅ft10.33 lbf⋅ft14 N⋅m

expand_moreInjection hoses


First stage	12.54 lbf⋅ft12.54 lbf⋅ft17 N⋅m
Replace injection line.
Second stage	20.65 lbf⋅ft20.65 lbf⋅ft28 N⋅m

expand_moreInjection nozzle (injector)


First stage	5.16 lbf⋅ft5.16 lbf⋅ft7 N⋅m
Second stage	55°55°55°

expand_moreCharging

expand_moreTurbo charger


All other modifications	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreTurbocharger coolant feed line

expand_moreAll other modifications


At the turbocharger	20.65 lbf⋅ft20.65 lbf⋅ft28 N⋅m
On the engine block	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m

expand_moreTurbocharger coolant return line

expand_moreAll other modifications


At the turbocharger	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m

expand_moreTurbocharger oil feed line

expand_moreAll other modifications


On the engine block	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.


Turbocharger oil return line	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreCooling system

expand_moreCoolant pump


All other modifications	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m


Coolant pump pulley	17.7 lbf⋅ft17.7 lbf⋅ft24 N⋅m

expand_moreCylinder head

expand_moreCamshaft bearing

expand_moreAll other modifications

Figure 2. Cylinder head, Camshaft bearing, All other modifications.


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
See figure 2.
Second stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreCylinder head screws

expand_moreAll other modifications


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
Third stage	220°220°220°

expand_moreValve cover


All other modifications	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_moreEngine block

expand_moreConnecting rod bearing


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Second stage	70°70°70°

expand_moreCrankshaft central screws

expand_moreAll other modifications


First stage	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m
Use new screw.
Second stage	110°110°110°

expand_moreDrive plate


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws.
Second stage	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Third stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Fourth stage	90°90°90°


Engine block closure screws	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreFlywheel

expand_moreAll other modifications


First stage	24.34 lbf⋅ft24.34 lbf⋅ft33 N⋅m
Second stage	35°35°35°

expand_moreMain bearing

expand_moreAll other modifications


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Second stage	82°82°82°

expand_moreEngine control


Camshaft drive belt deflection pulley	41.3 lbf⋅ft41.3 lbf⋅ft56 N⋅m
Use new parts.

expand_moreCamshaft timing chain tensioner


All other modifications	4.43 lbf⋅ft4.43 lbf⋅ft6 N⋅m

expand_moreCamshaft timing gear


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Second stage	60°60°60°

expand_moreInlet camshaft wheel

expand_moreAll other modifications

expand_moreCentral screws


First stage	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Use new screw.
Second stage	75°75°75°


Locking screws	11.8 lbf⋅ft11.8 lbf⋅ft16 N⋅m

expand_moreOutlet camshaft wheel

expand_moreCentral screws


First stage	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Use new screw.
Second stage	75°75°75°


Locking screws	11.8 lbf⋅ft11.8 lbf⋅ft16 N⋅m


Toothed belt guard	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreToothed belt guard at the bottom


All other modifications	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreToothed belt guard at the top


All other modifications	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreToothed belt tensioning roller


All other modifications	15.49 lbf⋅ft15.49 lbf⋅ft21 N⋅m
Use new parts.

expand_moreEngine lubrication


Oil cooler	40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m

expand_moreOil drain plug


All other modifications	25.08 lbf⋅ft25.08 lbf⋅ft34 N⋅m


Oil filter housing	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreOil pump


All other modifications	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_moreOil sump

expand_moreAll other modifications

Figure 3. Engine lubrication, Oil sump, All other modifications.


Oil sump lower part	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
See figure 3.

expand_moreOil sump top part


At the gearbox	35.4 lbf⋅ft35.4 lbf⋅ft48 N⋅m
On the engine block	11.8 lbf⋅ft11.8 lbf⋅ft16 N⋅m

expand_moreEngine management

expand_moreCamshaft sensor


All other modifications	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreCrankshaft sensor


All other modifications	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m


Exhaust gas temperature sensor	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Glow plugs	4.43 lbf⋅ft4.43 lbf⋅ft6 N⋅m
Knock sensor	13.28 lbf⋅ft13.28 lbf⋅ft18 N⋅m

expand_moreLambda sensor


All other modifications	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m

expand_moreEngine mounting

expand_moreEngine bracket


All other modifications	41.3 lbf⋅ft41.3 lbf⋅ft56 N⋅m

expand_moreEngine mounting

expand_moreAll other modifications


On chassis	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
On engine bracket	59 lbf⋅ft59 lbf⋅ft80 N⋅m


Extension for subframe	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreSubframe

expand_moreOn chassis


Front	84.82 lbf⋅ft84.82 lbf⋅ft115 N⋅m

expand_moreRear


First stage	103.26 lbf⋅ft103.26 lbf⋅ft140 N⋅m
Second stage	180°180°180°


Subframe stiffening plate	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreTorque arm

expand_moreAt the subframe


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Second stage	270°270°270°


Onto torque support bracket	92.2 lbf⋅ft92.2 lbf⋅ft125 N⋅m

expand_moreTorque support bracket

expand_moreAll other modifications


MMT 6 gearbox	35.4 lbf⋅ft35.4 lbf⋅ft48 N⋅m
MPS6 gearbox	59 lbf⋅ft59 lbf⋅ft80 N⋅m

expand_moreExhaust system

expand_moreCatalytic converter


All other modifications	17.7 lbf⋅ft17.7 lbf⋅ft24 N⋅m


Catalytic converter bracket	17.7 lbf⋅ft17.7 lbf⋅ft24 N⋅m

expand_moreDiesel particulate filter


All other modifications	17.7 lbf⋅ft17.7 lbf⋅ft24 N⋅m

expand_moreExhaust manifold

expand_moreAll other modifications


With turbo charger	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreExhaust manifold heat shields


All other modifications	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m


Exhaust pipe	35.4 lbf⋅ft35.4 lbf⋅ft48 N⋅m
Particle filter bracket	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreIgnition system

expand_moreSpark plugs


All other modifications	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m

expand_moreStart system


Starter	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2012 Ford Kuga user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Ford warranty policy for your region. In some regions DIY service may invalidate your warranty.

Maintenance Items

Engine Fastener Tightening Specifications
Front Suspension Fastener Tightening Specifications
Rear Suspension Fastener Tightening Specifications
Transmission Fastener Tightening Specifications

Service Intervals

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Ford Kuga service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2012 Ford Kuga you're not only saving money, but also also improving your technical skills and learning something new.

2012 Ford Kuga generations

In 2012 Ford offered 2 generations of the Kuga. Engine fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.

First generation facelift (MK1)

C1 Platform

2012 Ford Kuga Second generation (MK2) Engine Fastener Tightening Specifications

Table of Contents

Conquer your fears and never give up!

2012 Ford Kuga generations

First generation facelift (MK1)

Ford Kuga Second generation (MK2) model years

Suggest edit