2017 Ford Focus ST Wagon engine fastener tightening specifications

in your garage to make future searches easy.

Condition	Value

expand_moreAir intake system


Intake manifold	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAuxiliary assemblies


Auxiliary drive belt tensioner	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Air-conditioning compressor	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Air-conditioning compressor pressure line	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Alternator	17.7 lbf⋅ft17.7 lbf⋅ft24 N⋅m
Vacuum pump	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreCarburetion

expand_moreFuel-distributing pipe


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Second stage	360° detach
Third stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Fourth stage	26°26°26°

expand_moreHigh-pressure line


First stage	5.16 lbf⋅ft5.16 lbf⋅ft7 N⋅m
Replace fuel line.
Second stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Third stage	30°30°30°

expand_moreHigh-pressure pump


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	55°55°55°

expand_moreHigh-pressure pump drive wheel

expand_moreAt the cylinder head


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Second stage	60°60°60°

expand_moreCharging

expand_moreTurbo charger


Nuts	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m


Turbocharger coolant return line	20.65 lbf⋅ft20.65 lbf⋅ft28 N⋅m
Replace coolant lines for turbocharger.

expand_moreTurbocharger oil feed line


At the turbocharger	20.65 lbf⋅ft20.65 lbf⋅ft28 N⋅m
On the engine block	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m


Turbocharger oil return line	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace line.

expand_moreCooling system


Coolant pump	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Coolant pump pulley	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreCylinder head

expand_moreCamshaft bearing


First stage	5.16 lbf⋅ft5.16 lbf⋅ft7 N⋅m
Tighten from inside to outside.
Second stage	11.8 lbf⋅ft11.8 lbf⋅ft16 N⋅m

expand_moreCylinder head screws


First stage	5.16 lbf⋅ft5.16 lbf⋅ft7 N⋅m
Second stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Third stage	40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m
Fourth stage	90°90°90°
Fifth stage	90°90°90°


Valve cover	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
See figure 1.

expand_moreEngine block

expand_moreCrankshaft central screws


First stage	73.76 lbf⋅ft73.76 lbf⋅ft100 N⋅m
Use new screw.
Second stage	90°90°90°


Engine block closure screws	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreFlywheel


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Use new screws and tighten them crosswise.
Second stage	59 lbf⋅ft59 lbf⋅ft80 N⋅m
Third stage	82.61 lbf⋅ft82.61 lbf⋅ft112 N⋅m

expand_moreEngine control


Camshaft timing chain guide rail	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Camshaft timing chain tensioner	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreInlet camshaft wheel


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Second stage	60°60°60°


Oil pump drive chain tensioner	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreOutlet camshaft wheel


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Second stage	60°60°60°

expand_moreTiming case cover


M10	35.4 lbf⋅ft35.4 lbf⋅ft48 N⋅m
M6	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreEngine lubrication


Oil drain plug	19.18 lbf⋅ft19.18 lbf⋅ft26 N⋅m

expand_moreOil filter housing


On the engine block	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m


Oil pump	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Tighten in several steps.
Oil pump chain wheel	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreOil sump


At the gearbox	35.4 lbf⋅ft35.4 lbf⋅ft48 N⋅m
On the engine block	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreEngine management


Camshaft sensor	5.16 lbf⋅ft5.16 lbf⋅ft7 N⋅m
Crankshaft sensor	5.16 lbf⋅ft5.16 lbf⋅ft7 N⋅m
Knock sensor	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Lambda sensor	35.4 lbf⋅ft35.4 lbf⋅ft48 N⋅m

expand_moreEngine mounting

expand_moreEngine bracket


Stud screws	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m

expand_moreEngine mounting


On chassis	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
On engine bracket	59 lbf⋅ft59 lbf⋅ft80 N⋅m

expand_moreSubframe


Front	84.82 lbf⋅ft84.82 lbf⋅ft115 N⋅m

expand_moreRear


First stage	103.26 lbf⋅ft103.26 lbf⋅ft140 N⋅m
Second stage	180°180°180°

expand_moreSubframe stiffening plate


Inside	35.4 lbf⋅ft35.4 lbf⋅ft48 N⋅m
Outside	46.47 lbf⋅ft46.47 lbf⋅ft63 N⋅m

expand_moreTorque arm

expand_moreAt the subframe


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Second stage	270°270°270°

expand_moreOnto torque support bracket


First stage	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Second stage	360° detach
Third stage	62.69 lbf⋅ft62.69 lbf⋅ft85 N⋅m

expand_moreTorque support bracket


M10	35.4 lbf⋅ft35.4 lbf⋅ft48 N⋅m
M12	62.69 lbf⋅ft62.69 lbf⋅ft85 N⋅m

expand_moreExhaust system

expand_moreCatalytic converter


Clamps	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace sealing rings.


Catalytic converter bracket	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreExhaust manifold

expand_moreAt the cylinder head


Stud screws	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m


Exhaust pipe	35.4 lbf⋅ft35.4 lbf⋅ft48 N⋅m

expand_moreExhaust pipe bracket


At the subframe	17.7 lbf⋅ft17.7 lbf⋅ft24 N⋅m

expand_moreIgnition system


Spark plugs	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m

expand_moreStart system


Starter	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2017 Ford Focus ST Wagon user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Ford warranty policy for your region. In some regions DIY service may invalidate your warranty.

Maintenance Items

Engine Fastener Tightening Specifications
Front Suspension Fastener Tightening Specifications
Rear Suspension Fastener Tightening Specifications
Transmission Fastener Tightening Specifications

Service Intervals

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Ford Focus ST Wagon service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2017 Ford Focus ST Wagon you're not only saving money, but also also improving your technical skills and learning something new.

2017 Ford Focus ST Wagon Third generation facelift (MK3.5) Engine Fastener Tightening Specifications

Table of Contents

Conquer your fears and never give up!

Ford Focus ST Wagon Third generation facelift (MK3.5) model years

Suggest edit