2008 Ford Focus ST Hatchback engine fastener tightening specifications

in your garage to make future searches easy.

Condition	Value

expand_moreAir intake system


Intake manifold	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m

expand_moreAuxiliary assemblies


Auxiliary drive belt tensioner	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m
Air-conditioning compressor	17.7 lbf⋅ft17.7 lbf⋅ft24 N⋅m
Air-conditioning compressor bracket	17.7 lbf⋅ft17.7 lbf⋅ft24 N⋅m
Alternator	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Generator bracket	17.7 lbf⋅ft17.7 lbf⋅ft24 N⋅m
Tensioning device for air-conditioning compressor auxiliary drive belt	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m

expand_moreCarburetion


Fuel-distributing pipe	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Injection nozzle (injector)	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreCooling system


Coolant pump	12.54 lbf⋅ft12.54 lbf⋅ft17 N⋅m

expand_moreCylinder head

expand_moreCamshaft bearing


Bearing casing	12.54 lbf⋅ft12.54 lbf⋅ft17 N⋅m
helically from the inside out

expand_moreCylinder head screws

Figure 1. Cylinder head, Cylinder head screws.


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws. See figure 1.
Second stage	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
Third stage	130°130°130°


Valve cover	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreEngine block

expand_moreConnecting rod bearing


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	90°90°90°


Crankshaft central screws	132.76 lbf⋅ft132.76 lbf⋅ft180 N⋅m
Use new screws.

expand_moreFlywheel


First stage	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m
Replace screws.
Second stage	65°65°65°

expand_moreMain bearing

expand_moreM10


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m
cross-wise from inside to outside
Fifth stage	90°90°90°

expand_moreM7


Fourth stage	12.54 lbf⋅ft12.54 lbf⋅ft17 N⋅m
Replace screws.

expand_moreM8


Third stage	17.7 lbf⋅ft17.7 lbf⋅ft24 N⋅m
Replace screws.

expand_moreVibration damper


First stage	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Second stage	60°60°60°

expand_moreEngine control


Camshaft drive belt deflection pulley	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreInlet camshaft wheel


Central screws	88.51 lbf⋅ft88.51 lbf⋅ft120 N⋅m
Locking screws	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m

expand_moreOutlet camshaft wheel


Central screws	88.51 lbf⋅ft88.51 lbf⋅ft120 N⋅m
Locking screws	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m


Toothed belt tensioning roller	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Toothed belt tightener	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreEngine lubrication

expand_moreOil cooler


On engine sump	12.54 lbf⋅ft12.54 lbf⋅ft17 N⋅m


Oil drain plug	28.03 lbf⋅ft28.03 lbf⋅ft38 N⋅m

expand_moreOil filter housing


Oil filter cover	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
On the engine block	11.8 lbf⋅ft11.8 lbf⋅ft16 N⋅m


Oil pump	4.43 lbf⋅ft4.43 lbf⋅ft6 N⋅m
Oil sump	12.54 lbf⋅ft12.54 lbf⋅ft17 N⋅m

expand_moreEngine management


Camshaft sensor	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Crankshaft sensor	4.43 lbf⋅ft4.43 lbf⋅ft6 N⋅m
Knock sensor	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Lambda sensor	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m

expand_moreEngine mounting

expand_moreEngine bracket

expand_moreOn the engine block

expand_moreM10


First stage	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Second stage	75°75°75°

expand_moreM8


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Second stage	90°90°90°

expand_moreEngine mounting


On chassis	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
On the engine block	84.82 lbf⋅ft84.82 lbf⋅ft115 N⋅m

expand_moreSubframe

expand_moreOn chassis


Front	84.82 lbf⋅ft84.82 lbf⋅ft115 N⋅m

expand_moreOn chassis at the front


Second stage	92.2 lbf⋅ft92.2 lbf⋅ft125 N⋅m

expand_moreOn chassis on the rear side


First stage	103.26 lbf⋅ft103.26 lbf⋅ft140 N⋅m


Reinforcing plate	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m

expand_moreSubframe stiffening plate

expand_moreOn chassis


Rear	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m

expand_moreTorque arm


First stage	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Second stage	loosen by 360°
Third stage	62.69 lbf⋅ft62.69 lbf⋅ft85 N⋅m

expand_moreExhaust system


Exhaust manifold	17.7 lbf⋅ft17.7 lbf⋅ft24 N⋅m

expand_moreStart system


Starter	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2008 Ford Focus ST Hatchback user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Ford warranty policy for your region. In some regions DIY service may invalidate your warranty.

Maintenance Items

Engine Fastener Tightening Specifications
Front Suspension Fastener Tightening Specifications
Rear Suspension Fastener Tightening Specifications
Transmission Fastener Tightening Specifications

Service Intervals

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Ford Focus ST Hatchback service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2008 Ford Focus ST Hatchback you're not only saving money, but also also improving your technical skills and learning something new.

2008 Ford Focus ST Hatchback generations

In 2008 Ford offered 2 generations of the Focus ST Hatchback. Engine fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.

Second generation (MK2)

C1 Platform

2008 Ford Focus ST Hatchback Second generation facelift (MK2) Engine Fastener Tightening Specifications

Table of Contents

Conquer your fears and never give up!

2008 Ford Focus ST Hatchback generations

Second generation (MK2)

Ford Focus ST Hatchback Second generation facelift (MK2) model years

Suggest edit