2009 Ford Focus Hatchback Second generation facelift (MK2.5) Rear Suspension Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
Rear axle brake caliper | 25.81 lbf⋅ft |
Rear axle brake caliper mounting support | 51.63 lbf⋅ft |
Rear axle brake mounting | 51.63 lbf⋅ft |
Rear axle wheel brake cylinder | 7.38 lbf⋅ft |
Rear axle wheel speed sensor | 3.69 lbf⋅ft |
On chassis | 18.44 lbf⋅ft |
On stub axle | 84.82 lbf⋅ft |
At the axle support | 84.82 lbf⋅ft |
On stub axle | 84.82 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Eccentric screw | |
Second stage | 66.38 lbf⋅ft |
On stub axle | 84.82 lbf⋅ft |
On chassis | 92.2 lbf⋅ft |
On chassis | 92.2 lbf⋅ft |
At the axle support | 35.4 lbf⋅ft |
With stabilizer support ball joint variant | 35.4 lbf⋅ft |
Otherwise | 18.44 lbf⋅ft |
With stabilizer support ball joint variant | 51.63 lbf⋅ft |
Screws 1 | 84.82 lbf⋅ft |
See figure 1. | |
Screws 2 | 66.38 lbf⋅ft |
Screws 3 | 35.4 lbf⋅ft |
Screws 4 | 51.63 lbf⋅ft |
Screws 5 | 18.44 lbf⋅ft |
At the axle support | 84.82 lbf⋅ft |
On stub axle | 84.82 lbf⋅ft |
First stage | 47.94 lbf⋅ft |
tighten alternately | |
Second stage | 90° detach |
Third stage | 47.94 lbf⋅ft |
Tire pressure sensors | 5.9 lbf⋅ft |
Tire-fitter | 95.88 lbf⋅ft |
Otherwise | 95.88 lbf⋅ft |
Steel rims | 66.38 lbf⋅ft |
Steel rims | 95.88 lbf⋅ft |
Aluminium rims | 81.13 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2009 Ford Focus Hatchback user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Ford warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Regeneration Fluid Capacity
- Steering Fluid Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
- Chassis and Body Fastener Tightening Specifications
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Ford Focus Hatchback service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2009 Ford Focus Hatchback you're not only saving money, but also also improving your technical skills and learning something new.
2009 Ford Focus Hatchback generations
In 2009 Ford offered 2 generations of the Focus Hatchback. Rear suspension fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.