2011 Dodge Nitro engine fastener tightening specifications

in your garage to make future searches easy.

Condition	Value

expand_moreAir intake system

expand_moreIntake manifold


All other modifications	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAuxiliary assemblies

expand_moreAuxiliary drive belt deflection pulley

expand_moreAll other modifications


On the engine block	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m

expand_moreAuxiliary drive belt tensioner


All other modifications	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m


Air-conditioning compressor	20.65 lbf⋅ft20.65 lbf⋅ft28 N⋅m
Air-conditioning compressor bracket	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m

expand_moreAlternator

expand_moreAll Dodge gasoline V6 3.7 L EKG engines


Front	42.04 lbf⋅ft42.04 lbf⋅ft57 N⋅m

expand_moreRear


Lateral-fitting	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m


All other modifications	39.83 lbf⋅ft39.83 lbf⋅ft54 N⋅m


Servo steering pump	20.65 lbf⋅ft20.65 lbf⋅ft28 N⋅m

expand_moreCarburetion


Fuel-distributing pipe	17.7 lbf⋅ft17.7 lbf⋅ft24 N⋅m
High-pressure pump pulley	64.91 lbf⋅ft64.91 lbf⋅ft88 N⋅m

expand_moreInjection nozzle (injector)


Fuel lines union nuts	20.65 lbf⋅ft20.65 lbf⋅ft28 N⋅m
Retaining clamp	24.34 lbf⋅ft24.34 lbf⋅ft33 N⋅m

expand_moreInjection pump


High-pressure pump	17.7 lbf⋅ft17.7 lbf⋅ft24 N⋅m

expand_moreCooling system

expand_moreCoolant pump


All other modifications	17.7 lbf⋅ft17.7 lbf⋅ft24 N⋅m

expand_moreCylinder head


Camshaft bearing	8.11 lbf⋅ft8.11 lbf⋅ft11 N⋅m
Replace screws.

expand_moreCylinder head screws

expand_moreAll other modifications

Figure 1. Cylinder head, Cylinder head screws, All other modifications.


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws. See figure 1.
Second stage	85°85°85°
Third stage	85°85°85°
Fourth stage	85°85°85°

expand_moreValve cover


All Dodge gasoline V6 3.7 L EKG engines	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
All other modifications	8.11 lbf⋅ft8.11 lbf⋅ft11 N⋅m

expand_moreEngine block

expand_moreCrankshaft central screws

expand_moreAll other modifications


First stage	73.76 lbf⋅ft73.76 lbf⋅ft100 N⋅m
Left-hand thread
Second stage	120°120°120°


Crankshaft pulley	23.6 lbf⋅ft23.6 lbf⋅ft32 N⋅m

expand_moreDrive plate

expand_moreAll other modifications


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace screws.
Second stage	Loosen screw(s).

expand_moreThird stage


First step	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Second step	60°60°60°

expand_moreEngine block closure screws


All Dodge gasoline V6 3.7 L EKG engines	59.74 lbf⋅ft59.74 lbf⋅ft81 N⋅m
on camshaft gear
All other modifications	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m

expand_moreFlywheel


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace screws.
Second stage	Loosen screw(s).

expand_moreThird stage


First step	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Second step	60°60°60°

expand_moreVibration damper


All Dodge gasoline V6 3.7 L EKG engines	129.07 lbf⋅ft129.07 lbf⋅ft175 N⋅m

expand_moreEngine control

expand_moreCamshaft timing chain tensioner


3.7 V6 4WD with gasoline V6 3.7 L 202 HP engine (2007.6–2012.12)	20.65 lbf⋅ft20.65 lbf⋅ft28 N⋅m

expand_moreCamshaft timing gear


All Dodge gasoline V6 3.7 L EKG engines	89.98 lbf⋅ft89.98 lbf⋅ft122 N⋅m
All other modifications	47.2 lbf⋅ft47.2 lbf⋅ft64 N⋅m

expand_moreTiming case cover


3.7 V6 4WD with gasoline V6 3.7 L 202 HP engine (2007.6–2012.12)	42.78 lbf⋅ft42.78 lbf⋅ft58 N⋅m

expand_moreToothed belt guard at the bottom


All other modifications	8.11 lbf⋅ft8.11 lbf⋅ft11 N⋅m

expand_moreToothed belt guard at the top


All other modifications	8.11 lbf⋅ft8.11 lbf⋅ft11 N⋅m


Toothed belt tensioning roller	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m

expand_moreEngine lubrication

expand_moreOil filter housing


Oil filter cover	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreEngine management


Camshaft sensor	8.11 lbf⋅ft8.11 lbf⋅ft11 N⋅m
Crankshaft sensor	20.65 lbf⋅ft20.65 lbf⋅ft28 N⋅m
Glow plugs	10.33 lbf⋅ft10.33 lbf⋅ft14 N⋅m

expand_moreKnock sensor


All Dodge gasoline V6 3.7 L EKG engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreExhaust system

expand_moreExhaust manifold


All other modifications	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m

expand_moreIgnition system

expand_moreSpark plugs


All Dodge gasoline V6 3.7 L EKG engines	19.91 lbf⋅ft19.91 lbf⋅ft27 N⋅m

expand_moreStart system

expand_moreStarter


All Dodge gasoline V6 3.7 L EKG engines	39.83 lbf⋅ft39.83 lbf⋅ft54 N⋅m
All other modifications	30.24 lbf⋅ft30.24 lbf⋅ft41 N⋅m

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2011 Dodge Nitro user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Dodge warranty policy for your region. In some regions DIY service may invalidate your warranty.

Maintenance Items

Engine Fastener Tightening Specifications
Front Suspension Fastener Tightening Specifications
Rear Suspension Fastener Tightening Specifications
Transmission Fastener Tightening Specifications

Service Intervals

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Dodge Nitro service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2011 Dodge Nitro you're not only saving money, but also also improving your technical skills and learning something new.

2011 Dodge Nitro First generation Engine Fastener Tightening Specifications

Table of Contents

Conquer your fears and never give up!

Dodge Nitro First generation model years

Suggest edit