2.0 CRD with diesel straight-4 2.0 L 138 HP engine (2007.7–2010.12)
14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
expand_moreAuxiliary assemblies
expand_moreAuxiliary drive belt tensioner
2.0 CRD with diesel straight-4 2.0 L 138 HP engine (2007.7–2010.12)
22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
expand_moreHydraulic lines at the servo-steering pump
expand_more2.0 CRD with diesel straight-4 2.0 L 138 HP engine (2007.7–2010.12)
Union nuts
23.6 lbf⋅ft23.6 lbf⋅ft32 N⋅m
expand_moreServo steering pump
2.0 CRD with diesel straight-4 2.0 L 138 HP engine (2007.7–2010.12)
22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
expand_moreCarburetion
expand_moreInjection nozzle (injector)
expand_more2.0 CRD with diesel straight-4 2.0 L 138 HP engine (2007.7–2010.12)
First stage
2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Second stage
90°90°90°
Third stage
180°180°180°
expand_moreCooling system
expand_moreCoolant pump
2.0 CRD with diesel straight-4 2.0 L 138 HP engine (2007.7–2010.12)
8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
expand_moreCylinder head
expand_moreCylinder head screws
expand_more2.0 CRD with diesel straight-4 2.0 L 138 HP engine (2007.7–2010.12)
First stage
25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Use new screws.
Second stage
44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
Third stage
90°90°90°
Fourth stage
90°90°90°
expand_moreRocker bridge
expand_more2.0 CRD with diesel straight-4 2.0 L 138 HP engine (2007.7–2010.12)
First stage
14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Second stage
90°90°90°
expand_moreValve cover
2.0 CRD with diesel straight-4 2.0 L 138 HP engine (2007.7–2010.12)
7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
expand_moreEngine block
expand_moreBalance shaft module
expand_more2.0 CRD with diesel straight-4 2.0 L 138 HP engine (2007.7–2010.12)
First stage
4.43 lbf⋅ft4.43 lbf⋅ft6 N⋅m
Replace screws.
Second stage
14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Third stage
90°90°90°
expand_moreConnecting rod bearing
expand_more2.0 CRD with diesel straight-4 2.0 L 138 HP engine (2007.7–2010.12)
First stage
22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage
90°90°90°
expand_moreCrankshaft pulley
expand_more2.0 CRD with diesel straight-4 2.0 L 138 HP engine (2007.7–2010.12)
First stage
7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.
Second stage
90°90°90°
expand_moreFlywheel
2.0 CRD with diesel straight-4 2.0 L 138 HP engine (2007.7–2010.12)
70.07 lbf⋅ft70.07 lbf⋅ft95 N⋅m
Use new screws and tighten them crosswise.
expand_moreMain bearing
expand_more2.0 CRD with diesel straight-4 2.0 L 138 HP engine (2007.7–2010.12)
First stage
47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Use new screws.
Second stage
90°90°90°
expand_moreEngine control
expand_moreInlet camshaft wheel
2.0 CRD with diesel straight-4 2.0 L 138 HP engine (2007.7–2010.12)
18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
expand_moreOutlet camshaft wheel
2.0 CRD with diesel straight-4 2.0 L 138 HP engine (2007.7–2010.12)
18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
expand_moreToothed belt guard
2.0 CRD with diesel straight-4 2.0 L 138 HP engine (2007.7–2010.12)
7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
expand_moreToothed belt tensioning roller
expand_more2.0 CRD with diesel straight-4 2.0 L 138 HP engine (2007.7–2010.12)
First stage
14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Second stage
45°45°45°
expand_moreEngine lubrication
expand_moreOil drain plug
2.0 CRD with diesel straight-4 2.0 L 138 HP engine (2007.7–2010.12)
22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
expand_moreOil filter housing
expand_more2.0 CRD with diesel straight-4 2.0 L 138 HP engine (2007.7–2010.12)
Oil filter cover
18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
expand_moreOil pump
2.0 CRD with diesel straight-4 2.0 L 138 HP engine (2007.7–2010.12)
11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
expand_moreOil sump
expand_more2.0 CRD with diesel straight-4 2.0 L 138 HP engine (2007.7–2010.12)
At the gearbox
29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
On engine
11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
expand_moreEngine management
expand_moreCamshaft sensor
2.0 CRD with diesel straight-4 2.0 L 138 HP engine (2007.7–2010.12)
7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
expand_moreCrankshaft sensor
2.0 CRD with diesel straight-4 2.0 L 138 HP engine (2007.7–2010.12)
3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
expand_moreGlow plugs
2.0 CRD with diesel straight-4 2.0 L 138 HP engine (2007.7–2010.12)
7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
expand_moreEngine mounting
expand_moreEngine bracket
expand_more2.0 CRD with diesel straight-4 2.0 L 138 HP engine (2007.7–2010.12)
On engine
36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
expand_moreFuel supply
expand_moreFuel pump
2.0 CRD with diesel straight-4 2.0 L 138 HP engine (2007.7–2010.12)
14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2007 Chrysler Sebring Convertible user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Chrysler warranty policy for your region. In some regions DIY service may invalidate your warranty.
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Chrysler Sebring Convertible service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2007 Chrysler Sebring Convertible you're not only saving money, but also also improving your technical skills and learning something new.
2007 Chrysler Sebring Convertible generations
In 2007 Chrysler offered 2 generations of the Sebring Convertible. Engine fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.