in your garage to make future searches easy.

Condition Value
expand_moreAir intake system
Intake manifold 14.75 lbf⋅ft
expand_moreAuxiliary assemblies
expand_moreAuxiliary drive belt deflection pulley
3.2 with gasoline V6 3.2 L 215 HP engine (2003.7–2008.12) 7.38 lbf⋅ft
expand_moreAuxiliary drive belt tensioner
3.2 with gasoline V6 3.2 L 215 HP engine (2003.7–2008.12) 18.44 lbf⋅ft
Air-conditioning compressor 14.75 lbf⋅ft
expand_moreAlternator
3.2 with gasoline V6 3.2 L 215 HP engine (2003.7–2008.12) 30.98 lbf⋅ft
expand_moreHydraulic lines at the servo-steering pump
SRT-6 with gasoline V6 3.2 L 330 HP engine (2004.9–2007.12) 22.13 lbf⋅ft
expand_moreServo steering pump
3.2 with gasoline V6 3.2 L 215 HP engine (2003.7–2008.12) 14.75 lbf⋅ft
expand_moreCooling system
expand_moreCoolant pump
3.2 with gasoline V6 3.2 L 215 HP engine (2003.7–2008.12) 25.81 lbf⋅ft
expand_moreCoolant pump pulley
3.2 with gasoline V6 3.2 L 215 HP engine (2003.7–2008.12) 7.38 lbf⋅ft
expand_moreCylinder head
expand_moreCamshaft bearing
expand_more3.2 with gasoline V6 3.2 L 215 HP engine (2003.7–2008.12)
First stage 11.06 lbf⋅ft
Use new screws.
Second stage 90°
expand_moreCylinder head screws
expand_moreAll Chrysler gasoline V6 3.2 L EGX engines
Figure 1. Cylinder head, Cylinder head screws, Chrysler gasoline V6 3.2 L EGX.
Figure 1. Cylinder head, Cylinder head screws, Chrysler gasoline V6 3.2 L EGX.
First stage 7.38 lbf⋅ft
Oil screws before reusing. See figure 1.
Second stage 22.13 lbf⋅ft
Third stage 90°
Fourth stage 90°
expand_moreScrews 9 – 10
Fifth stage 14.75 lbf⋅ft
expand_moreAll Chrysler gasoline V6 3.2 L EGZ engines
Figure 2. Cylinder head, Cylinder head screws, Chrysler gasoline V6 3.2 L EGZ.
Figure 2. Cylinder head, Cylinder head screws, Chrysler gasoline V6 3.2 L EGZ.
First stage 14.75 lbf⋅ft
Oil screws before reusing. See figure 2.
Second stage 36.88 lbf⋅ft
Third stage 6070°
Fourth stage 6070°
expand_moreScrews 9 – 10
Fifth stage 18.44 lbf⋅ft
Valve cover 7.38 lbf⋅ft
expand_moreEngine block
expand_moreConnecting rod bearing
First stage 3.69 lbf⋅ft
maximum skirt length 47,6 mm
Second stage 18.44 lbf⋅ft
Third stage 90°
expand_moreCrankshaft central screws
First stage 147.51 lbf⋅ft
Replace screws. Oil bearing face.
Second stage 90°
expand_moreFlywheel
First stage 33.19 lbf⋅ft
Use new screws and tighten them crosswise.
Second stage 90°
expand_moreMain bearing
expand_moreM10
First stage 22.13 lbf⋅ft
Second stage 90°
expand_moreM8
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreVibration damper
First stage 147.51 lbf⋅ft
Second stage 90°
expand_moreEngine control
expand_moreCamshaft timing gear
First stage 36.88 lbf⋅ft
Second stage 90°
Chain tensioner 59 lbf⋅ft
Control drive chain tensioner 59 lbf⋅ft
Timing case cover 14.75 lbf⋅ft
expand_moreEngine lubrication
expand_moreOil cooler
SRT-6 with gasoline V6 3.2 L 330 HP engine (2004.9–2007.12) 8.11 lbf⋅ft
Oil drain plug 22.13 lbf⋅ft
expand_moreOil filter
expand_moreSRT-6 with gasoline V6 3.2 L 330 HP engine (2004.9–2007.12)
Oil filter cover 18.44 lbf⋅ft
expand_moreOil filter housing
expand_more3.2 with gasoline V6 3.2 L 215 HP engine (2003.7–2008.12)
Oil filter cover 18.44 lbf⋅ft
expand_moreOil sump
expand_moreOil sump top part
expand_moreAll Chrysler gasoline V6 3.2 L EGX engines
First stage 7.38 lbf⋅ft
M6 x 20
Second stage 7.38 lbf⋅ft
M6 x 40
Third stage 7.38 lbf⋅ft
M6 x 90
expand_moreAll Chrysler gasoline V6 3.2 L EGZ engines
M6 7.38 lbf⋅ft
M8 14.75 lbf⋅ft
Oil sump lower part 10.33 lbf⋅ft
expand_moreEngine management
Camshaft sensor 7.38 lbf⋅ft
expand_moreKnock sensor
SRT-6 with gasoline V6 3.2 L 330 HP engine (2004.9–2007.12) 14.75 lbf⋅ft
Lambda sensor 36.88 lbf⋅ft
expand_moreEngine mounting
expand_moreEngine bracket
expand_moreAll Chrysler gasoline V6 3.2 L EGX engines
expand_moreOn the engine block
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll Chrysler gasoline V6 3.2 L EGZ engines
On engine mounting 40.57 lbf⋅ft
expand_moreOn the engine block
First stage 14.75 lbf⋅ft
Second stage 90°
expand_moreEngine mounting
expand_moreAll Chrysler gasoline V6 3.2 L EGX engines
On chassis 25.81 lbf⋅ft
On engine bracket 40.57 lbf⋅ft
expand_moreAll Chrysler gasoline V6 3.2 L EGZ engines
On engine bracket 25.81 lbf⋅ft
expand_moreEngine suspension
3.2 with gasoline V6 3.2 L 215 HP engine (2003.7–2008.12) 25.81 lbf⋅ft
expand_moreExhaust system
Exhaust manifold 25.81 lbf⋅ft
Replace nuts.
expand_moreExhaust pipe
3.2 with gasoline V6 3.2 L 215 HP engine (2003.7–2008.12) 14.75 lbf⋅ft
expand_moreIgnition system
expand_moreSpark plugs
SRT-6 with gasoline V6 3.2 L 330 HP engine (2004.9–2007.12) 20.65 lbf⋅ft

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2005 Chrysler Crossfire Coupe user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Chrysler warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Chrysler Crossfire Coupe service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2005 Chrysler Crossfire Coupe you're not only saving money, but also also improving your technical skills and learning something new.

Chrysler Crossfire Coupe First generation model years

Units:
facebook twitter reddit linkedin messenger whatsapp telegram skype email chat