2016 Chrysler 300C Second generation facelift Engine Oil Capacity
For 2016 300C Second generation facelift Chrysler recommends to use: MS-6395 engine oils. To select the right engine oil see the table below.
How much engine oil you need to put into 2016 300C depends on the engine installed.
in your garage to make future searches easy.
| Condition | Volume |
|---|
| Chrysler gasoline V6 3.6 L ERB 282 HP | 5.92 US qt. |
| Engine oil: MS-6395 | |
| Chrysler gasoline V6 3.6 L ERB 288 HP | 5.92 US qt. |
| Engine oil: MS-6395 | |
| Chrysler gasoline V8 6.4 L ESG 465 HP | 6.97 US qt. |
| Engine oil: MS-6395 | |
Replacing engine oil in your 2016 Chrysler 300C is quite an easy task. It's a bit dirty, but everyone can handle it. It will take about 30–60 minutes depends on your skill level and might save you $10–$30 depends on the region you live in.
First unscrew the refill cap on the top of the engine. Use a ratchet with the correct size head to unscrew the drain plug on the engine oil pan located on the bottom side of the engine, and drain old oil. You might need to unscrew a few more screws to remove protection covers underneath your car to get access to the oil pan and the oil filter. Then using an oil filter wrench unscrew the old oil filter. Then lubricate a new filter rubber gasket with clean engine oil and install the new filter. Install a new drain plug, and with help of a funnel refill the engine with new engine oil.
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2016 Chrysler 300C user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Chrysler warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Gearbox Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Chrysler 300C service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2016 Chrysler 300C you're not only saving money, but also also improving your technical skills and learning something new.