2015 Chrysler 300C Second generation facelift Front Suspension Fastener Tightening Specifications
in your garage to make future searches easy.
| Condition | Value |
|---|
| 3.0 CRD with diesel V6 3.0 L 236 HP engine (2011.9–) | 8.11 lbf⋅ft |
| At the brake caliper | 36.88 lbf⋅ft |
| At the brake caliper | 24.34 lbf⋅ft |
| Brake line | 14.75 lbf⋅ft |
| Guide screws | 44.25 lbf⋅ft |
| Chrysler gasoline V8 6.4 L ESG 465 HP | 140.14 lbf⋅ft |
| Replace screws. | |
| Front axle brake caliper mounting support | 70.07 lbf⋅ft |
| Replace screws. | |
| Wheel speed sensor | 8.11 lbf⋅ft |
| Lower steering column joint | 39.83 lbf⋅ft |
| Replace screws. | |
| Pressure line at steering gear | 34.67 lbf⋅ft |
| Return line to steering gear | 34.67 lbf⋅ft |
| Steering gear | 70.07 lbf⋅ft |
| First stage | 25.81 lbf⋅ft |
| Replace nuts. | |
| Second stage | 90° |
| Lock nuts | 55.32 lbf⋅ft |
| Shock-absorber piston rod | 70.07 lbf⋅ft |
| Replace nuts. | |
| At the transverse control arm | 128.34 lbf⋅ft |
| Replace screws and nuts. | |
| On chassis | 19.91 lbf⋅ft |
| Front axle stabiliser mounting | 44.25 lbf⋅ft |
| Stabiliser mounting at the stabiliser | 94.41 lbf⋅ft |
| Replace nuts. | |
| Stabiliser mounting at suspension strut | 94.41 lbf⋅ft |
| Replace nuts. | |
| Stabilizer mounting at the subframe | 44.25 lbf⋅ft |
| On chassis | 55.32 lbf⋅ft |
| First stage | 34.67 lbf⋅ft |
| Replace screws and nuts. | |
| Second stage | 90° |
| On chassis | 129.81 lbf⋅ft |
| First stage | 50.15 lbf⋅ft |
| Replace nuts. | |
| Second stage | 90° |
| On chassis subframe | 129.81 lbf⋅ft |
| First stage | 50.15 lbf⋅ft |
| Replace nuts. | |
| Second stage | 90° |
| Central nuts | 157.1 lbf⋅ft |
| Replace nuts. | |
| Union nuts | 5.9 lbf⋅ft |
| Aluminium rims | 110.63 lbf⋅ft |
| Steel rims | 140.14 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2015 Chrysler 300C user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Chrysler warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Gearbox Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Chrysler 300C service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2015 Chrysler 300C you're not only saving money, but also also improving your technical skills and learning something new.
2015 Chrysler 300C generations
In 2015 Chrysler offered 2 generations of the 300C. Front suspension fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.