Chevrolet gasoline Big-block W-series (Mark I) 348 CID (5.7 L) High Torque Special 160 hp (1964-)
Chevrolet gasoline Big-block W-series (Mark I) 348 CID (5.7 L) High Torque Special 160 hp (1964-) is an 348 in³ (5.7 L) internal combustion reciprocating V8 engine. It has bore/stroke ratio of 4.125 in × 3.25 in (10.478 cm × 8.26 cm), and uses 7.75:1 compression. This engine was rated 160 hp (119.31 kW) at 3600 rpm and 285 lbf⋅ft (386.41 N⋅m) of torque at 1800 rpm. It was used in Chevrolet and GMC cars.
Truck version.
Equipped with 4 barrel carburetor.
Forged Crank: round flywheel bolt flange
Connecting rod length: 6.135 inches
Crankshaft mains: 2.4977 inches
Push rod length: exhaust 9.140 inches, intake 8.772 inches
Push rod diameter: 5/16 inch (all)
Fuel pump push rod length: 5.75 inches
Dipstick: on drivers side
Rocker arm ration: 1.75:1
Parameter | Output |
---|---|
Power Rating | 160 hp (119.31 kW) at 3600 RPM |
Torque Rating | 285 lbf⋅ft at 1800 RPM |
Parameter | Output |
---|---|
Power Rating | 185 hp (137.95 kW) at 4000 RPM |
Torque Rating | 315 lbf⋅ft at 2200 RPM |
Parameter | Value |
---|---|
Type | Internal Combustion Reciprocating |
Fuel Type | Gasoline |
Cylinder Configuration | V8 |
Engine Displacement | 348 in³ |
Bore | 4.125 in |
Stroke | 3.25 in |
Compression Ratio | 7.75:1 |
Firing Order | 1-8-4-3-6-5-7-2 |
Curb Weight | 802 lb |
Curb Idle Speed | 450-475 RPMs |
Photos
-
add_photo
Please help our community. Upload your photos of Chevrolet gasoline Big-block W-series (Mark I) 348 CID (5.7 L) High Torque Special 160 hp (1964-) engine.
Sign Up / Sign In
Parameter | Value |
---|---|
Block Material | Cast alloy iron |
Crankshaft Material | Forged steel, induction hardened journalls |
Piston Material | Cast alloy aluminum with cast-in steel ring; angular head; 3 ring grooves above piston pin |
Piston Pin Material | Tubular, hardened chrome alloy steel |
Connecting Rod Material | Forged carbon steel; I-beam section |
Parameter | Value |
---|---|
Spark Plugs | AC Delco C42N |
Spark Plug Size | 0.55 in |
Spark Plug Gap | 0.035 in |
Parameter | Value |
---|---|
Head Material | Cast alloy iron |
Valvetrain Type | OHV |
Valves per Cylinder | 2 |
Camshaft Material | Cast alloy iron |
Parameter | Value |
---|---|
Air Intake Method | Naturally Aspirated |
Parameter | Value |
---|---|
Injection Type | Carburetor |
Injection Info | 2-barrel Rochester downdraft type with manual choke control |
Parameter | Value |
---|---|
Intake Opens | 12.5° B.T.D.C. |
Intake Closes | 73.5° A.B.D.C. |
Intake Duration | 266° |
Exhaust Opens | 62.5° B.B.D.C. |
Exhaust Closes | 31.5° A.T.D.C. |
Exhaust Duration | 274° |
Valves Overlap | 180° |
Ignition Timing | 8° B.T.C. |
Parameter | Value |
---|---|
Oil Pump | Spur-gear type driven by distributor shaft |
Oil Pump Pressure | 30 Psi at 1200 RPM |
Oil Pump Capacity | 4.22 US gpm at 1200 RPM |
Parameter | Value |
---|---|
Water Pump | Centrifugal type driven by fan belt |
Water Pump Capacity | 81 US gpm at 4000 RPM |