For 2003 X5 First generation BMW recommends to use: DOT 4, and DOT 4 Class 6 brake fluids. To select the right brake fluid see the table below.

How much brake fluid you need to put into 2003 X5 depends on the engine installed, and some other conditions listed below.

in your garage to make future searches easy.

Condition Volume
With automatic gearbox 1.06 US qt.
Brake fluid: DOT 4 Class 6
Otherwise 1.27 US qt.
Brake fluid: DOT 4 Class 6
All other modifications 1.06 US qt.
Brake fluid: DOT 4

Changing brake fluid in 2003 BMW X5 is not as hard as it seems. The whole job will take about 2040 minutes and will save you $50$100.

Remove old brake fluid from the master cylinder reservoir with a turkey baster and clean the reservoir with lint-free cloth. Pour new fluid into the reservoir. Ask your buddy to help you bleed brakes. If no one is around buy a cheap non-return valve in a pharmacy. Bleed your brakes in a sequenced as described in owners manual until new fluid can be seen at all bleed screws. Constantly check brake fluid level in the master cylinder while you're bleeding brakes.

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2003 BMW X5 user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and BMW warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow BMW X5 service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2003 BMW X5 you're not only saving money, but also also improving your technical skills and learning something new.

2003 BMW X5 generations

In 2003 BMW offered 2 generations of the X5. Brake fluid capacity may vary in different generations. Be sure that you are looking at the rigt modification.

BMW X5 First generation model years

Units:
facebook twitter reddit1 linkedin messenger whatsapp telegram skype email chat