For 2014 X5 M Third generation BMW recommends to use: and genuine OEM transmission oils with following part numbers: 33 11 7 695 240, and 83 12 0 445 832. To select the right transmission oil see the table below.
How much transmission oil you need to put into 2014 X5 M depends on conditions listed below.
in your garage to make future searches easy.
Condition
Volume
expand_moreFront axle
M 50 d with diesel straight-6 3.0 L 375 HP, 740 N⋅m at 2000 RPM engine (2013.7–)
Axle oil replacement in 2014 BMW X5 M might take 30–60 minutes, and will save you $30–$50 depends on the region you live in. The process is simple and requires minimum skills and time.
Unscrew the refill plug first then unscrew the drain plug. Use a spanner or a retched with the correct size head. When axle oil is completely drained screw the drain plug back with a new gasket. Complete the process by refilling the axle with new oil.
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2014 BMW X5 M user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and BMW warranty policy for your region. In some regions DIY service may invalidate your warranty.
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow BMW X5 M service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2014 BMW X5 M you're not only saving money, but also also improving your technical skills and learning something new.