2009 BMW X3 engine fastener tightening specifications

expand_moreAir intake system

expand_moreIntake manifold

expand_more2.0 d with diesel straight-4 2.0 L 148 HP engine (2004.10–2010.12)


M7	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m

expand_morexDrive 20 i with gasoline straight-4 2.0 L 148 HP engine (2008.9–2011.8)


At the cylinder head	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m

expand_morexDrive 25 i with gasoline straight-6 2.5 L 215 HP engine (2008.9–2011.12)


M6	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
M7	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
M8	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m

expand_morexDrive 30 d with diesel straight-6 3.0 L 208 HP engine (2008.9–2011.4)

expand_moreM6


Screws	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_moreM7


Nuts	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m

expand_moreAll other modifications


M6	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Tighten the screws evenly in several steps.

expand_moreAuxiliary assemblies

expand_moreAuxiliary drive belt deflection pulley

expand_morexDrive 20 i with gasoline straight-4 2.0 L 148 HP engine (2008.9–2011.8)


On alternator	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreAll other modifications


M10	28.03 lbf⋅ft28.03 lbf⋅ft38 N⋅m

expand_moreAuxiliary drive belt tensioner


xDrive 20 i with gasoline straight-4 2.0 L 148 HP engine (2008.9–2011.8)	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreAll other modifications

expand_moreM11


First stage	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Use new screw.
Second stage	90°90°90°

expand_moreAir-conditioning compressor

expand_more2.0 d with diesel straight-4 2.0 L 148 HP engine (2004.10–2010.12)


M8	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m


xDrive 30 d with diesel straight-6 3.0 L 208 HP engine (2008.9–2011.4)	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m
xDrive 30 d with diesel straight-6 3.0 L 215 HP engine (2008.9–2011.4)	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m
xDrive 35 d with diesel straight-6 3.0 L 282 HP at 4000 RPM, 560 N⋅m at 2000 RPM engine (2008.9–2011.8)	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m
All other modifications	28.03 lbf⋅ft28.03 lbf⋅ft38 N⋅m

expand_moreAir-conditioning compressor pressure line


xDrive 30 d with diesel straight-6 3.0 L 208 HP engine (2008.9–2011.4)	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
xDrive 30 d with diesel straight-6 3.0 L 215 HP engine (2008.9–2011.4)	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
xDrive 35 d with diesel straight-6 3.0 L 282 HP at 4000 RPM, 560 N⋅m at 2000 RPM engine (2008.9–2011.8)	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAll other modifications


M8	13.28 lbf⋅ft13.28 lbf⋅ft18 N⋅m

expand_moreAlternator

expand_morexDrive 20 i with gasoline straight-4 2.0 L 148 HP engine (2008.9–2011.8)


Onto crankcase	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m

expand_morexDrive 25 i with gasoline straight-6 2.5 L 215 HP engine (2008.9–2011.12)

expand_moreOnto crankcase (M8)


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Second stage	180°180°180°

expand_moreAll other modifications


M10	28.03 lbf⋅ft28.03 lbf⋅ft38 N⋅m

expand_moreVacuum pump

expand_more2.0 d with diesel straight-4 2.0 L 148 HP engine (2004.10–2010.12)


M8	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m

expand_morexDrive 25 i with gasoline straight-6 2.5 L 215 HP engine (2008.9–2011.12)


M6 screws (class 10.9)	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
M6 8.8	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m


All other modifications	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m
Replace screws.

expand_moreVacuum pump sprocket wheel


M10 × 30 screws	48.68 lbf⋅ft48.68 lbf⋅ft66 N⋅m

expand_moreCarburetion


Fuel-distributing pipe	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreHigh-pressure line


2.0 d with diesel straight-4 2.0 L 148 HP engine (2004.10–2010.12)	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_morexDrive 30 d with diesel straight-6 3.0 L 208 HP engine (2008.9–2011.4)


Union nuts	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll other modifications


Union nuts	17.7 lbf⋅ft17.7 lbf⋅ft24 N⋅m

expand_moreHigh-pressure pump


All BMW diesel straight-4 2.0 L M47 D20 (204D4) engines	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m

expand_moreAll other modifications


M8	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m

expand_moreHigh-pressure pump pulley


2.0 d with diesel straight-4 2.0 L 148 HP engine (2004.10–2010.12)	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m

expand_morexDrive 30 d with diesel straight-6 3.0 L 208 HP engine (2008.9–2011.4)

expand_moreM14


Central screws	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m

expand_moreM40 × 1,5 screws


Cap	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m

expand_morexDrive 30 d with diesel straight-6 3.0 L 215 HP engine (2008.9–2011.4)

expand_moreM14 × 1,5 screws


Central screws	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m

expand_moreM40 × 1,5 screws


Cap	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m

expand_moreAll other modifications


Cap	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace the cover plate.

expand_moreM12


Central screws	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m

expand_moreInjection hoses


Union nuts	17.7 lbf⋅ft17.7 lbf⋅ft24 N⋅m

expand_moreInjection nozzle (injector)

expand_more2.0 d with diesel straight-4 2.0 L 174 HP, 340 N⋅m at 2000 RPM engine (2007.9–2009.3)


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Second stage	19.18 lbf⋅ft19.18 lbf⋅ft26 N⋅m

expand_morexDrive 18 d with diesel straight-4 2.0 L 134 HP engine (2009.4–2011.12)


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Second stage	19.18 lbf⋅ft19.18 lbf⋅ft26 N⋅m

expand_morexDrive 18 d with diesel straight-4 2.0 L 141 HP engine (2008.9–2011.12)


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Second stage	19.18 lbf⋅ft19.18 lbf⋅ft26 N⋅m

expand_morexDrive 20 d with diesel straight-4 2.0 L 161 HP engine (2008.9–2010.8)


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Second stage	19.18 lbf⋅ft19.18 lbf⋅ft26 N⋅m


All other modifications	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Replace sealing rings.

expand_moreCharging

expand_moreTurbo charger

expand_more2.0 d with diesel straight-4 2.0 L 148 HP engine (2004.10–2010.12)


On exhaust manifold	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
tighten gradually cross-wise

expand_morexDrive 30 d with diesel straight-6 3.0 L 208 HP engine (2008.9–2011.4)


Clamps	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_morexDrive 35 d with diesel straight-6 3.0 L 282 HP at 4000 RPM, 560 N⋅m at 2000 RPM engine (2008.9–2011.8)


M10 × 25 screws	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
M10 × 80 screws	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
M8 × 22 screws	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAll other modifications


On exhaust manifold	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
tighten gradually cross-wise


Turbocharger oil feed line	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m
Replace sealing rings.
Turbocharger oil return line	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Hose clamps.

expand_moreCooling system

expand_moreCoolant drain plug

expand_morexDrive 25 i with gasoline straight-6 2.5 L 215 HP engine (2008.9–2011.12)

expand_moreOnto crankcase


M14	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace sealing rings.

expand_moreAll other modifications

expand_moreOnto crankcase


M14	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace sealing rings.

expand_moreCoolant pump

expand_more2.0 d with diesel straight-4 2.0 L 148 HP engine (2004.10–2010.12)


M7	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m

expand_morexDrive 20 i with gasoline straight-4 2.0 L 148 HP engine (2008.9–2011.8)


On servo pump	23.6 lbf⋅ft23.6 lbf⋅ft32 N⋅m
On the engine block	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m


xDrive 30 d with diesel straight-6 3.0 L 208 HP engine (2008.9–2011.4)	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m
xDrive 30 d with diesel straight-6 3.0 L 215 HP engine (2008.9–2011.4)	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m

expand_morexDrive 35 d with diesel straight-6 3.0 L 282 HP at 4000 RPM, 560 N⋅m at 2000 RPM engine (2008.9–2011.8)

expand_moreOnto crankcase


M7	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m


All other modifications	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreCylinder head

expand_moreCamshaft bearing

expand_more2.0 d with diesel straight-4 2.0 L 148 HP engine (2004.10–2010.12)


M7	10.33 lbf⋅ft10.33 lbf⋅ft14 N⋅m

expand_more2.0 d with diesel straight-4 2.0 L 174 HP, 340 N⋅m at 2000 RPM engine (2007.9–2009.3)


Bearing cap	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Figure 1. Cylinder head, Camshaft bearing, 2.0 d with diesel straight-4 2.0 L 174 HP, 340 N⋅m at 2000 RPM engine (2007.9–2009.3).
Bearing casing	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m
Note correct order of tensioning. See figure 1.

expand_morexDrive 18 d with diesel straight-4 2.0 L 134 HP engine (2009.4–2011.12)


Bearing cap	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

Bearing casing	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m
Note correct order of tensioning. See figure 1.

expand_morexDrive 18 d with diesel straight-4 2.0 L 141 HP engine (2008.9–2011.12)


Bearing cap	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

Bearing casing	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m
Note correct order of tensioning. See figure 1.

expand_morexDrive 20 d with diesel straight-4 2.0 L 161 HP engine (2008.9–2010.8)


Bearing cap	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

Bearing casing	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m
Note correct order of tensioning. See figure 1.

expand_morexDrive 25 i with gasoline straight-6 2.5 L 215 HP engine (2008.9–2011.12)


Inlet camshaft	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Replace aluminum screws.

expand_moreOutlet camshaft


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace aluminum screws.
Second stage	60°60°60°


All other modifications	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_moreCylinder head screws

expand_more2.0 d with diesel straight-4 2.0 L 148 HP engine (2004.10–2010.12)

expand_moreScrews 1 – 10

Figure 2. Cylinder head, Cylinder head screws, 2.0 d with diesel straight-4 2.0 L 148 HP engine (2004.10–2010.12), Screws 1 – 10.


First stage	59 lbf⋅ft59 lbf⋅ft80 N⋅m
Replace screws. See figure 2.
Second stage	180° detach
loosen in reverse order to the illustration
Third stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Fourth stage	90°90°90°
Fifth stage	90°90°90°

expand_moreScrew 11


Sixth stage	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m

expand_morexDrive 20 i with gasoline straight-4 2.0 L 148 HP engine (2008.9–2011.8)

expand_moreScrews 1 – 10

Figure 3. Cylinder head, Cylinder head screws, xDrive 20 i with gasoline straight-4 2.0 L 148 HP engine (2008.9–2011.8), Screws 1 – 10.


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws. See figure 3.
Second stage	90°90°90°
Third stage	90°90°90°

expand_morexDrive 25 i with gasoline straight-6 2.5 L 215 HP engine (2008.9–2011.12)

expand_moreScrews 1 – 14

Figure 4. Cylinder head, Cylinder head screws, xDrive 25 i with gasoline straight-6 2.5 L 215 HP engine (2008.9–2011.12), Screws 1 – 14.


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws. See figure 4.
Second stage	90°90°90°
Fourth stage	45°45°45°

expand_moreScrews 1 – 10


Third stage	90°90°90°

expand_moreScrews 15 – 18


Fifth stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.

expand_moreScrews 15 – 17


Sixth stage	90°90°90°

expand_moreScrew 18


Seventh stage	135°135°135°

expand_morexDrive 30 d with diesel straight-6 3.0 L 208 HP engine (2008.9–2011.4)

expand_moreScrews 1 – 14

Figure 5. Cylinder head, Cylinder head screws, xDrive 30 d with diesel straight-6 3.0 L 208 HP engine (2008.9–2011.4), Screws 1 – 14.


First stage	59 lbf⋅ft59 lbf⋅ft80 N⋅m
Replace screws. See figure 5.
Second stage	180° detach
Third stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Fourth stage	90°90°90°
Fifth stage	90°90°90°

expand_moreScrew 15


Sixth stage	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m

expand_morexDrive 35 d with diesel straight-6 3.0 L 282 HP at 4000 RPM, 560 N⋅m at 2000 RPM engine (2008.9–2011.8)

expand_moreScrews 1 – 14


First stage	59 lbf⋅ft59 lbf⋅ft80 N⋅m
Replace screws. See figure 5.
Second stage	180° detach
Loosen the cylinder head screws in the reverse order of tightening.
Third stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Fourth stage	120°120°120°
Fifth stage	120°120°120°

expand_moreScrew 15


Sixth stage	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m

expand_moreAll other modifications

expand_moreScrews 1 – 10

Figure 6. Cylinder head, Cylinder head screws, All other modifications, Screws 1 – 10.


First stage	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m
Replace screws. See figure 6.
Second stage	180° detach
loosen in reverse order to the illustration
Third stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Fourth stage	120°120°120°
Fifth stage	120°120°120°

expand_moreScrew 11


Sixth stage	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m

expand_moreValve cover

expand_more2.0 d with diesel straight-4 2.0 L 174 HP, 340 N⋅m at 2000 RPM engine (2007.9–2009.3)


M6	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_morexDrive 18 d with diesel straight-4 2.0 L 134 HP engine (2009.4–2011.12)


M6	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_morexDrive 18 d with diesel straight-4 2.0 L 141 HP engine (2008.9–2011.12)


M6	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_morexDrive 20 d with diesel straight-4 2.0 L 161 HP engine (2008.9–2010.8)


M6	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m


xDrive 20 i with gasoline straight-4 2.0 L 148 HP engine (2008.9–2011.8)	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_morexDrive 25 i with gasoline straight-6 2.5 L 215 HP engine (2008.9–2011.12)


M7	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Replace aluminum screws.

expand_moreAll other modifications


M6	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
M7	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m

expand_moreEngine block

expand_moreBalance shaft gear wheel


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Second stage	90°90°90°

expand_moreConnecting rod bearing

expand_morexDrive 20 i with gasoline straight-4 2.0 L 148 HP engine (2008.9–2011.8)


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace and lightly oil the screws.
Second stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Third stage	70°70°70°

expand_morexDrive 25 i with gasoline straight-6 2.5 L 215 HP engine (2008.9–2011.12)


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screw, wash and slightly oil.
Second stage	120°120°120°

expand_moreAll other modifications


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace, wash and lubricate the screws.
Second stage	70°70°70°

expand_moreCrankshaft central screws

expand_more2.0 d with diesel straight-4 2.0 L 148 HP engine (2004.10–2010.12)


First stage	73.76 lbf⋅ft73.76 lbf⋅ft100 N⋅m
Use new screw.
Second stage	150°150°150°

expand_morexDrive 18 d with diesel straight-4 2.0 L 134 HP engine (2009.4–2011.12)

expand_moreM47 engine


First stage	73.76 lbf⋅ft73.76 lbf⋅ft100 N⋅m
Use new screw.
Second stage	150°150°150°

expand_morexDrive 18 d with diesel straight-4 2.0 L 141 HP engine (2008.9–2011.12)

expand_moreM47 engine


First stage	73.76 lbf⋅ft73.76 lbf⋅ft100 N⋅m
Use new screw.
Second stage	150°150°150°


xDrive 20 i with gasoline straight-4 2.0 L 148 HP engine (2008.9–2011.8)	221.27 lbf⋅ft221.27 lbf⋅ft300 N⋅m
Use new screw.

expand_moreAll other modifications

expand_moreM16


First stage	73.76 lbf⋅ft73.76 lbf⋅ft100 N⋅m
Use new screw.
Second stage	360°360°360°

expand_moreDrive plate


2.0 d with diesel straight-4 2.0 L 174 HP engine (2007.9–2009.3)	88.51 lbf⋅ft88.51 lbf⋅ft120 N⋅m
Replace screws.
2.0 d with diesel straight-4 2.0 L 174 HP, 340 N⋅m at 2000 RPM engine (2007.9–2009.3)	88.51 lbf⋅ft88.51 lbf⋅ft120 N⋅m
Replace screws.
xDrive 18 d with diesel straight-4 2.0 L 134 HP engine (2009.4–2011.12)	88.51 lbf⋅ft88.51 lbf⋅ft120 N⋅m
Replace screws.
xDrive 18 d with diesel straight-4 2.0 L 141 HP engine (2008.9–2011.12)	88.51 lbf⋅ft88.51 lbf⋅ft120 N⋅m
Replace screws.
xDrive 20 d with diesel straight-4 2.0 L 161 HP engine (2008.9–2010.8)	88.51 lbf⋅ft88.51 lbf⋅ft120 N⋅m
Replace screws.
xDrive 20 d with diesel straight-4 2.0 L 174 HP engine (2008.9–2010.8)	88.51 lbf⋅ft88.51 lbf⋅ft120 N⋅m
Replace screws.

expand_morexDrive 25 i with gasoline straight-6 2.5 L 215 HP engine (2008.9–2011.12)

expand_moreN52 engine


Magnesium valve cover	88.51 lbf⋅ft88.51 lbf⋅ft120 N⋅m
Replace screws.

expand_morePlastic valve cover screws of N52 engine


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	92.2 lbf⋅ft92.2 lbf⋅ft125 N⋅m


All other modifications	89.25 lbf⋅ft89.25 lbf⋅ft121 N⋅m
Replace bolts.

expand_moreEngine block closure screws

expand_morexDrive 30 d with diesel straight-6 3.0 L 215 HP engine (2008.9–2011.4)


M30 × 1 screws	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m
M40 × 1,5 screws	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m


All other modifications	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreFlywheel

expand_morexDrive 20 i with gasoline straight-4 2.0 L 148 HP engine (2008.9–2011.8)


M12	95.88 lbf⋅ft95.88 lbf⋅ft130 N⋅m


All other modifications	88.51 lbf⋅ft88.51 lbf⋅ft120 N⋅m
Replace screws.

expand_moreMain bearing

expand_more2.0 d with diesel straight-4 2.0 L 148 HP engine (2004.10–2010.12)


First stage	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
Replace screws.
Second stage	90°90°90°

expand_morexDrive 20 i with gasoline straight-4 2.0 L 148 HP engine (2008.9–2011.8)


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace bolts.
Second stage	70°70°70°

expand_morexDrive 25 i with gasoline straight-6 2.5 L 215 HP engine (2008.9–2011.12)

expand_moreM10 × 100 screws


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	70°70°70°

expand_moreM10 × 27 screws


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreM10 × 41 screws


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreM8 × 37 screws


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	90°90°90°

expand_morexDrive 30 d with diesel straight-6 3.0 L 208 HP engine (2008.9–2011.4)


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace screws.
Second stage	90°90°90°

expand_morexDrive 35 d with diesel straight-6 3.0 L 282 HP at 4000 RPM, 560 N⋅m at 2000 RPM engine (2008.9–2011.8)

expand_moreM10 × 85 screws


First stage	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace screws.
Second stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Third stage	60°60°60°
Fourth stage	60°60°60°
Fifth stage	180° detach
from inside to outside
Sixth stage	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Seventh stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Eighth stage	60°60°60°
Ninth stage	60°60°60°

expand_moreAll other modifications

expand_moreM10 × 85 screws


First stage	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace screws.
Second stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Third stage	60°60°60°
Fourth stage	60°60°60°

expand_moreVibration damper


xDrive 20 i with gasoline straight-4 2.0 L 148 HP engine (2008.9–2011.8)	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m

expand_morexDrive 25 i with gasoline straight-6 2.5 L 215 HP engine (2008.9–2011.12)


M8 × 16 screws	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m

expand_morexDrive 30 d with diesel straight-6 3.0 L 208 HP engine (2008.9–2011.4)


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Use new screws.
Second stage	60°60°60°
Third stage	60°60°60°

expand_moreAll other modifications


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	120°120°120°

expand_moreEngine control

expand_moreCamshaft timing chain guide rail

expand_morexDrive 20 i with gasoline straight-4 2.0 L 148 HP engine (2008.9–2011.8)


Cap	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace sealing rings.
Guide screws	10.33 lbf⋅ft10.33 lbf⋅ft14 N⋅m

expand_morexDrive 25 i with gasoline straight-6 2.5 L 215 HP engine (2008.9–2011.12)

expand_moreBearing screws


M7	10.33 lbf⋅ft10.33 lbf⋅ft14 N⋅m

expand_moreM18


Cap	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m


All other modifications	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreCamshaft timing chain slip rail

expand_more2.0 d with diesel straight-4 2.0 L 148 HP engine (2004.10–2010.12)


M16 × 1,5 screws	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAll other modifications

expand_moreAt the cylinder head


M6 × 35 screws	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_moreCamshaft timing chain tensioner

expand_more2.0 d with diesel straight-4 2.0 L 148 HP engine (2004.10–2010.12)


M6	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m


xDrive 20 i with gasoline straight-4 2.0 L 148 HP engine (2008.9–2011.8)	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
xDrive 25 i with gasoline straight-6 2.5 L 215 HP engine (2008.9–2011.12)	40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m
Replace sealing rings.
xDrive 30 d with diesel straight-6 3.0 L 208 HP engine (2008.9–2011.4)	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
xDrive 30 d with diesel straight-6 3.0 L 215 HP engine (2008.9–2011.4)	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
xDrive 30 i with gasoline straight-6 3.0 L 268 HP engine (2008.9–2011.12)	40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m
Replace sealing rings.
xDrive 35 d with diesel straight-6 3.0 L 282 HP at 4000 RPM, 560 N⋅m at 2000 RPM engine (2008.9–2011.8)	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
All other modifications	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m

expand_moreCamshaft timing chain tensioning rail

expand_more2.0 d with diesel straight-4 2.0 L 148 HP engine (2004.10–2010.12)


M16 × 1,5 screws	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_morexDrive 20 i with gasoline straight-4 2.0 L 148 HP engine (2008.9–2011.8)


Bearing screws	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Cap	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace sealing rings.

expand_morexDrive 25 i with gasoline straight-6 2.5 L 215 HP engine (2008.9–2011.12)

expand_moreBearing screws


M8	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreM22


Cap	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m


All other modifications	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreCamshaft timing gear

expand_more2.0 d with diesel straight-4 2.0 L 148 HP engine (2004.10–2010.12)


M7	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m

expand_morexDrive 30 d with diesel straight-6 3.0 L 215 HP engine (2008.9–2011.4)

expand_moreM57 engine M12 × 1,5 screws


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws and nuts.
Second stage	35°35°35°

expand_moreEngine code M57 D30 TU


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws and nuts.
Second stage	50°50°50°
M7 × 18 screws	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m


All other modifications	10.33 lbf⋅ft10.33 lbf⋅ft14 N⋅m

expand_moreChain tensioner

expand_morexDrive 30 d with diesel straight-6 3.0 L 215 HP engine (2008.9–2011.4)


Chain tensioner	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m

expand_morexDrive 35 d with diesel straight-6 3.0 L 282 HP at 4000 RPM, 560 N⋅m at 2000 RPM engine (2008.9–2011.8)


M22 × 1,5 screws	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m

expand_moreAll other modifications


M22 × 1,5 screws	40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m

expand_moreChain tensioner locking screws


M30 × 1 screws	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m
M40 × 1,5 screws	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m


Control drive chain guide rail	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreControl drive chain tensioner


M6	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m


Control drive chain tensioning rail	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreInlet camshaft wheel

expand_morexDrive 20 i with gasoline straight-4 2.0 L 148 HP engine (2008.9–2011.8)

expand_moreCentral screws


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Use new screw.
Second stage	90°90°90°
Third stage	90°90°90°

expand_moreAll other modifications

expand_moreM10


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	180°180°180°


Intermediate shaft chain sprocket	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m
Replace nuts.

expand_moreOil pump camshaft timing chain guide rail

expand_moreM6 × 16 screws


First stage	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreOutlet camshaft wheel

expand_morexDrive 20 i with gasoline straight-4 2.0 L 148 HP engine (2008.9–2011.8)

expand_moreCentral screws


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Use new screw.
Second stage	90°90°90°
Third stage	90°90°90°

expand_moreAll other modifications

expand_moreM10


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	180°180°180°

expand_moreTiming case cover

expand_more2.0 d with diesel straight-4 2.0 L 148 HP engine (2004.10–2010.12)

expand_moreM30 × 1 screws


Cap	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m

expand_moreM40 × 1,5 screws


Cap	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m

expand_moreM7


Screws	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m

expand_morexDrive 30 d with diesel straight-6 3.0 L 208 HP engine (2008.9–2011.4)

expand_moreM30 × 1 screws


Cap	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m

expand_moreM40 × 1,5 screws


Cap	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m

expand_moreM7


Screws	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m
Tighten the screws evenly in several steps.

expand_moreAll other modifications


Cap	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace the cover plate.

expand_moreScrews (M6)


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Second stage	90°90°90°

expand_moreEngine lubrication

expand_moreOil cooler


All other modifications	4.43 lbf⋅ft4.43 lbf⋅ft6 N⋅m

expand_moreOil drain plug


M12 × 1,5 screws	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace sealing rings.

expand_moreOil filter housing

expand_more2.0 d with diesel straight-4 2.0 L 174 HP, 340 N⋅m at 2000 RPM engine (2007.9–2009.3)


Oil filter cover	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
On the engine block	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m

expand_morexDrive 18 d with diesel straight-4 2.0 L 134 HP engine (2009.4–2011.12)


Oil filter cover	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
On the engine block	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m

expand_morexDrive 18 d with diesel straight-4 2.0 L 141 HP engine (2008.9–2011.12)


Oil filter cover	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
On the engine block	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m

expand_morexDrive 20 d with diesel straight-4 2.0 L 161 HP engine (2008.9–2010.8)


Oil filter cover	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
On the engine block	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m

expand_morexDrive 20 i with gasoline straight-4 2.0 L 148 HP engine (2008.9–2011.8)


M20 × 1,5 screws	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
M8	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m

expand_morexDrive 25 i with gasoline straight-6 2.5 L 215 HP engine (2008.9–2011.12)

expand_moreAt the cylinder head


M8	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m
Replace sealing rings.


Oil filter cover	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace sealing rings.

expand_moreAll other modifications


Oil filter cover	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreOil pump

expand_morexDrive 25 i with gasoline straight-6 2.5 L 215 HP engine (2008.9–2011.12)

expand_moreM8 × 123 screws


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.
Second stage	180°180°180°

expand_moreM8 × 31 screws


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.
Second stage	90°90°90°

expand_morexDrive 35 d with diesel straight-6 3.0 L 282 HP at 4000 RPM, 560 N⋅m at 2000 RPM engine (2008.9–2011.8)

expand_moreOnto crankcase


M8 × 35 screws	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m

expand_moreAll other modifications


M8 × 30 screws	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreM8 × 45 screws


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreOil pump chain wheel

expand_morexDrive 20 i with gasoline straight-4 2.0 L 148 HP engine (2008.9–2011.8)


Left-hand thread	23.6 lbf⋅ft23.6 lbf⋅ft32 N⋅m

expand_morexDrive 25 i with gasoline straight-6 2.5 L 215 HP engine (2008.9–2011.12)

expand_moreM8 × 20 screws


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Second stage	45°45°45°

expand_morexDrive 35 d with diesel straight-6 3.0 L 282 HP at 4000 RPM, 560 N⋅m at 2000 RPM engine (2008.9–2011.8)


M8 × 35 screws	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m

expand_moreAll other modifications


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Use new screw. (left-hand thread)
Second stage	90°90°90°

expand_moreOil sump

expand_morexDrive 20 i with gasoline straight-4 2.0 L 148 HP engine (2008.9–2011.8)


M8	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.

expand_morexDrive 25 i with gasoline straight-6 2.5 L 215 HP engine (2008.9–2011.12)

expand_moreAluminium sump M8 × 112 screws


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	60°60°60°

expand_moreM8 × 24 screws


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	60°60°60°

expand_moreAluminium sump M8 × 26 screws


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	60°60°60°

expand_moreAluminium sump M8 × 92 screws


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	180°180°180°

expand_morexDrive 30 d with diesel straight-6 3.0 L 208 HP engine (2008.9–2011.4)

expand_moreM6


Screws	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_moreM8


Screws	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m

expand_morexDrive 30 i with gasoline straight-6 3.0 L 268 HP engine (2008.9–2011.12)

expand_moreAluminium sump M8 × 36 screws


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAluminium sump M8 × 40 screws


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll other modifications


On the engine block	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreEngine management

expand_moreCamshaft sensor


xDrive 20 i with gasoline straight-4 2.0 L 148 HP engine (2008.9–2011.8)	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
xDrive 30 d with diesel straight-6 3.0 L 208 HP engine (2008.9–2011.4)	1.48 lbf⋅ft1.48 lbf⋅ft2 N⋅m
xDrive 30 d with diesel straight-6 3.0 L 215 HP engine (2008.9–2011.4)	1.48 lbf⋅ft1.48 lbf⋅ft2 N⋅m
All other modifications	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m

expand_moreCrankshaft sensor


xDrive 20 i with gasoline straight-4 2.0 L 148 HP engine (2008.9–2011.8)	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All other modifications	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m


Exhaust gas temperature sensor	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m

expand_moreGlow plugs


All other modifications	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m

expand_moreKnock sensor

expand_morexDrive 25 i with gasoline straight-6 2.5 L 215 HP engine (2008.9–2011.12)


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Second stage	90°90°90°


All other modifications	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m


Lambda sensor	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m

expand_moreEngine mounting

expand_moreEngine bracket

expand_morexDrive 30 d with diesel straight-6 3.0 L 208 HP engine (2008.9–2011.4)

expand_moreOn the engine block


M10 screws (class 8.8)	28.03 lbf⋅ft28.03 lbf⋅ft38 N⋅m
M8 screws (class 8.8)	15.49 lbf⋅ft15.49 lbf⋅ft21 N⋅m

expand_moreAll other modifications


On the engine block	28.03 lbf⋅ft28.03 lbf⋅ft38 N⋅m

expand_moreEngine mounting

expand_moreAt the axle support


M10	28.03 lbf⋅ft28.03 lbf⋅ft38 N⋅m
M8	15.49 lbf⋅ft15.49 lbf⋅ft21 N⋅m

expand_moreOn engine bracket


M10	41.3 lbf⋅ft41.3 lbf⋅ft56 N⋅m
M12	50.15 lbf⋅ft50.15 lbf⋅ft68 N⋅m

expand_moreSubframe

expand_moreOn chassis (M12)


Center	73.76 lbf⋅ft73.76 lbf⋅ft100 N⋅m
Replace screws.
Front	83.34 lbf⋅ft83.34 lbf⋅ft113 N⋅m
Replace screws.

expand_moreOn chassis on the rear side


M10	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace screws.
M12	73.76 lbf⋅ft73.76 lbf⋅ft100 N⋅m
Replace screws.

expand_moreSubframe stiffening plate


M10	54.58 lbf⋅ft54.58 lbf⋅ft74 N⋅m
Replace screws.

expand_moreExhaust system

expand_moreCatalytic converter

expand_more2.0 d with diesel straight-4 2.0 L 148 HP engine (2004.10–2010.12)


At the turbocharger	30.98 lbf⋅ft30.98 lbf⋅ft42 N⋅m
Clamps	39.83 lbf⋅ft39.83 lbf⋅ft54 N⋅m

expand_moreCatalytic converter bracket

expand_more2.0 d with diesel straight-4 2.0 L 148 HP engine (2004.10–2010.12)


M8	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m

expand_moreDiesel particulate filter


At the turbocharger	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace clamps.

expand_moreExhaust manifold

expand_more2.0 d with diesel straight-4 2.0 L 148 HP engine (2004.10–2010.12)


M8	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace nuts.

expand_morexDrive 20 i with gasoline straight-4 2.0 L 148 HP engine (2008.9–2011.8)


M7	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace nuts.
M8	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
Replace nuts.

expand_morexDrive 25 i with gasoline straight-6 2.5 L 215 HP engine (2008.9–2011.12)


M7	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_morexDrive 35 d with diesel straight-6 3.0 L 282 HP at 4000 RPM, 560 N⋅m at 2000 RPM engine (2008.9–2011.8)


M8	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m
Tighten new nuts evenly in several steps.

expand_moreAll other modifications


M7	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m
Replace nuts.

expand_moreExhaust pipe


On particle filter	37.62 lbf⋅ft37.62 lbf⋅ft51 N⋅m

expand_moreExhaust pipe bracket

expand_moreOn rear axle differential (M12)


Nuts	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m

expand_moreParticle filter bracket

expand_moreAt the gearbox


M8	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m

expand_moreM8 × 20 screws


Strut	15.49 lbf⋅ft15.49 lbf⋅ft21 N⋅m

expand_moreIgnition system

expand_moreSpark plugs


M12 × 1,5 screws	14.75–19.18 lbf⋅ft14.75–19.18 lbf⋅ft20–26 N⋅m
M14 × 1,5 screws	19.91–24.34 lbf⋅ft19.91–24.34 lbf⋅ft27–33 N⋅m

expand_moreStart system

expand_moreStarter

expand_more2.0 d with diesel straight-4 2.0 L 174 HP, 340 N⋅m at 2000 RPM engine (2007.9–2009.3)


M8	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m

expand_morexDrive 18 d with diesel straight-4 2.0 L 134 HP engine (2009.4–2011.12)


M8	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m

expand_morexDrive 18 d with diesel straight-4 2.0 L 141 HP engine (2008.9–2011.12)


M8	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m

expand_morexDrive 20 d with diesel straight-4 2.0 L 161 HP engine (2008.9–2010.8)


M8	14.01 lbf⋅ft14.01 lbf⋅ft19 N⋅m

expand_morexDrive 20 i with gasoline straight-4 2.0 L 148 HP engine (2008.9–2011.8)

expand_moreOnto crankcase


M10 × 30 screws	28.03 lbf⋅ft28.03 lbf⋅ft38 N⋅m

expand_morexDrive 25 i with gasoline straight-6 2.5 L 215 HP engine (2008.9–2011.12)

expand_moreM10 × 30 screws


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreM10 × 85 screws


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	180°180°180°


All other modifications	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m

2009 BMW X3 First generation LCI Engine Fastener Tightening Specifications

Table of Contents

Conquer your fears and never give up!

BMW X3 First generation LCI model years

Suggest edit