For 2007 X3 First generation LCI BMW recommends to use: and genuine OEM brake fluid with a part number: 83130443026. To select the right brake fluid see the table below.
How much brake fluid you need to put into 2007 X3 depends on conditions listed below.
Changing brake fluid in 2007 BMW X3 is not as hard as it seems. The whole job will take about 20–40 minutes and will save you $50–$100.
Remove old brake fluid from the master cylinder reservoir with a turkey baster and clean the reservoir with lint-free cloth. Pour new fluid into the reservoir. Ask your buddy to help you bleed brakes. If no one is around buy a cheap non-return valve in a pharmacy. Bleed your brakes in a sequenced as described in owners manual until new fluid can be seen at all bleed screws. Constantly check brake fluid level in the master cylinder while you're bleeding brakes.
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2007 BMW X3 user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and BMW warranty policy for your region. In some regions DIY service may invalidate your warranty.
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow BMW X3 service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2007 BMW X3 you're not only saving money, but also also improving your technical skills and learning something new.