2016 BMW i8 First generation Rear Suspension Fastener Tightening Specifications
in your garage to make future searches easy.
| Condition | Value |
|---|
| hybrid with gasoline straight-3 1.5 L 228 HP engine (2014.3–) | 7.38 lbf⋅ft |
| Code range 13 mm | 25.81 lbf⋅ft |
| Replace screws. | |
| Screws | 81.13 lbf⋅ft |
| hybrid with gasoline straight-3 1.5 L 228 HP engine (2014.3–) | 11.8 lbf⋅ft |
| Replace screws. | |
| At the brake caliper | 17.7 lbf⋅ft |
| hybrid with gasoline straight-3 1.5 L 228 HP engine (2014.3–) | 5.9 lbf⋅ft |
| Union nuts | 5.9 lbf⋅ft |
| M14 × 1,25 screws | 103.26 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2016 BMW i8 user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and BMW warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Refrigerant Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow BMW i8 service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2016 BMW i8 you're not only saving money, but also also improving your technical skills and learning something new.