2001 BMW 7 Series front suspension fastener tightening specifications

in your garage to make future searches easy.

Condition	Value

expand_moreFront axle brake

expand_moreBleed valve


Code range 11 mm	8.85–11.8 lbf⋅ft8.85–11.8 lbf⋅ft12–16 N⋅m
Code range 7 mm	2.58–3.69 lbf⋅ft2.58–3.69 lbf⋅ft3.5–5 N⋅m
Code range 9 mm	5.16–8.11 lbf⋅ft5.16–8.11 lbf⋅ft7–11 N⋅m

expand_moreBrake hose


At the brake line	13.28 lbf⋅ft13.28 lbf⋅ft18 N⋅m


Front axle brake caliper	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Front axle brake caliper mounting support	81.13 lbf⋅ft81.13 lbf⋅ft110 N⋅m
Front axle brake disc	11.8 lbf⋅ft11.8 lbf⋅ft16 N⋅m
Wheel speed sensor	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_moreFront axle steering


Steering gear	45.73 lbf⋅ft45.73 lbf⋅ft62 N⋅m
Track rod end on stub axle	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Track rod end on track rod	19.91 lbf⋅ft19.91 lbf⋅ft27 N⋅m

expand_moreFront axle suspension


Shock-absorber piston rod	47.2 lbf⋅ft47.2 lbf⋅ft64 N⋅m
Replace nut.

expand_moreSuspension strut

expand_moreOn stub axle


M12	59.74 lbf⋅ft59.74 lbf⋅ft81 N⋅m
Replace screws.


On suspension strut dome	17.7 lbf⋅ft17.7 lbf⋅ft24 N⋅m
Replace nuts.

expand_moreWheel suspension


Stabiliser mounting at the stabiliser	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Replace nut.
Stabiliser mounting at suspension strut	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Replace nut.

expand_moreLower front transverse control arm


At the subframe	57.53 lbf⋅ft57.53 lbf⋅ft78 N⋅m
Replace nut.
On stub axle	68.59 lbf⋅ft68.59 lbf⋅ft93 N⋅m
Replace nut.

expand_moreLower rear transverse control arm


At the subframe	93.67 lbf⋅ft93.67 lbf⋅ft127 N⋅m
Replace nut.
On stub axle	68.59 lbf⋅ft68.59 lbf⋅ft93 N⋅m
Replace nut.

expand_moreWheel hub wheel bearing


Collar nuts	213.89 lbf⋅ft213.89 lbf⋅ft290 N⋅m
Replace nuts.

expand_moreWheels and tires

expand_moreTire pressure sensors


Torx screws	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m
Replace the screw.
Union nuts	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m


Wheel attachment	88.51 lbf⋅ft88.51 lbf⋅ft120 N⋅m

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2001 BMW 7 Series user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and BMW warranty policy for your region. In some regions DIY service may invalidate your warranty.

Maintenance Items

Engine Fastener Tightening Specifications
Front Suspension Fastener Tightening Specifications
Rear Suspension Fastener Tightening Specifications
Transmission Fastener Tightening Specifications

Service Intervals

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow BMW 7 Series service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2001 BMW 7 Series you're not only saving money, but also also improving your technical skills and learning something new.

2001 BMW 7 Series generations

In 2001 BMW offered 2 generations of the 7 Series. Front suspension fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.

Fourth generation

E65, E66, E67

2001 BMW 7 Series Third generation LCI Front Suspension Fastener Tightening Specifications

Table of Contents

Conquer your fears and never give up!

2001 BMW 7 Series generations

Fourth generation

BMW 7 Series Third generation LCI model years

Suggest edit