in your garage to make future searches easy.

Condition Value
expand_moreRear axle brake
Brake anchor plate 8.85 lbf⋅ft
Rear axle brake caliper 22.13 lbf⋅ft
Clean the components and do not grease.
Rear axle brake caliper mounting support 81.13 lbf⋅ft
Rear axle brake disc 11.8 lbf⋅ft
expand_moreRear axle steering
expand_moreRear axle track rod
At the subframe 47.94 lbf⋅ft
expand_moreOn stub axle
M10 47.94 lbf⋅ft
Replace nuts.
M12 79.66 lbf⋅ft
expand_moreRear axle suspension
expand_moreRear axle shock absorber
On chassis 20.65 lbf⋅ft
Replace nuts.
On stub axle 121.7 lbf⋅ft
Replace screws.
Rear axle shock absorber piston rod 19.91 lbf⋅ft
Replace nuts.
expand_moreRear axle wheel suspension
expand_moreRear axle carrier
M12 screws (class 10.9) 73.76 lbf⋅ft
On chassis 121.7 lbf⋅ft
expand_moreRear axle carrier stiffening plate
expand_moreOn chassis
M10 28.03 lbf⋅ft
expand_moreRear axle drive shaft
expand_moreCollar nuts
M27 309.78 lbf⋅ft
Replace the nut and lightly oil the contact surfaces.
expand_moreM10 screws with ribbing
Torx screws 59 lbf⋅ft
Replace screws.
Rear axle stabilizer support at the axle control arm 42.78 lbf⋅ft
Replace nuts.
Rear axle stabilizer support at the stabilizer 42.78 lbf⋅ft
Replace nuts.
expand_moreTrack control arm lower
expand_moreAt the subframe
Front 73.76 lbf⋅ft
Replace screws and nuts.
expand_moreAt the subframe on the rear side
M14 129.07 lbf⋅ft
Replace screws and nuts.
expand_moreOn stub axle
M12 73.76 lbf⋅ft
Replace screws and nuts.
M16 177.01 lbf⋅ft
Replace screws and nuts.
expand_moreTrack control arm upper
On stub axle 121.7 lbf⋅ft
Replace screws and nuts.
expand_moreAt subframe on stub axle
First stage 73.76 lbf⋅ft
Replace screws and nuts.
Second stage 90°
expand_moreWheel hub wheel bearing
expand_moreM12
Wheel bearing unit 73.76 lbf⋅ft
expand_moreWheels and tires
expand_moreTire pressure sensors
Torx screws 2.95 lbf⋅ft
Replace the screw.
Union nuts 2.95 lbf⋅ft
Wheel attachment 95.88110.63 lbf⋅ft

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2007 BMW 7 Series user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and BMW warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow BMW 7 Series service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2007 BMW 7 Series you're not only saving money, but also also improving your technical skills and learning something new.

BMW 7 Series Fourth generation LCI model years

Units:
facebook twitter reddit linkedin messenger whatsapp telegram skype email chat