in your garage to make future searches easy.

Condition Value
expand_moreFront axle brake
expand_moreBleed valve
Code range 11 mm 8.8511.8 lbf⋅ft
Code range 7 mm 2.583.69 lbf⋅ft
Code range 9 mm 5.168.11 lbf⋅ft
expand_moreBrake hose
At the brake caliper 16.2319.18 lbf⋅ft
At the brake line 10.33 lbf⋅ft
Front axle brake caliper 22.13 lbf⋅ft
Clean the components and do not grease.
Front axle brake caliper mounting support 81.13 lbf⋅ft
Front axle brake disc 11.8 lbf⋅ft
Wheel speed sensor 5.9 lbf⋅ft
expand_moreFront axle steering
expand_moreLower steering column joint
At the steering gear 16.23 lbf⋅ft
Use a new screw and re-tap the thread.
expand_morePressure line at steering gear
M14 24.34 lbf⋅ft
Return line to steering gear 25.81 lbf⋅ft
expand_moreSteering gear
First stage 41.3 lbf⋅ft
Replace screws and nuts.
Second stage 90°
Steering gear heat protection plate 5.53 lbf⋅ft
Track rod end on stub axle 121.7 lbf⋅ft
Replace nuts.
Track rod end on track rod 37.62 lbf⋅ft
expand_moreFront axle suspension
expand_moreSuspension strut
On chassis 25.08 lbf⋅ft
Replace nuts.
On stub axle 59.74 lbf⋅ft
Replace screws and nuts.
expand_moreWheel suspension
Stabiliser mounting at the stabiliser 42.78 lbf⋅ft
Replace nuts.
expand_moreStabiliser mounting at suspension strut
First stage 14.75 lbf⋅ft
Replace nuts.
Second stage 90°
expand_moreLower front transverse control arm
Second stage 90°
expand_moreAt the subframe
First stage 73.76 lbf⋅ft
Replace screws and nuts.
On stub axle 121.7 lbf⋅ft
Replace nuts.
expand_moreLower rear transverse control arm
Second stage 75105°
expand_moreAt the subframe
First stage 73.76 lbf⋅ft
Replace screws and nuts.
On stub axle 121.7 lbf⋅ft
Replace nuts.
expand_moreWheel hub wheel bearing
Wheel bearing unit 81.13 lbf⋅ft
Replace screws.
expand_moreWheels and tires
expand_moreTire pressure sensors
Torx screws 2.95 lbf⋅ft
Replace the screw.
Union nuts 2.95 lbf⋅ft
Wheel attachment 95.88110.63 lbf⋅ft

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2003 BMW 7 Series user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and BMW warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow BMW 7 Series service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2003 BMW 7 Series you're not only saving money, but also also improving your technical skills and learning something new.

BMW 7 Series Fourth generation model years

Units:
facebook twitter reddit linkedin messenger whatsapp telegram skype email chat